Fedora Installation :: Configure Ext4 Partition And Verify Download?
Jun 5, 2010
i tried to install f13 from live cd and failed. i have 2 questions. i do not understand how to setup partitions according to scottro's message. It says you need small ext3-formatted /boot partion and a ext4-formatted root partition. Does this configuration have to be setup before you boot into the live cd? If so, please tell me how to set this up. my pc is pentium d with 2 hard drives. The master hd is has xp, ubuntu8.04, and swap partitions. I would like to use one-half of the slave drive for f13.
Second question. I would like to be able to verify download of fedora-13-i686.iso. I downloaded it to my xp partition and installed Windows MD5summer. Where or how do i get the md5 file for this iso file?
View 14 Replies
ADVERTISEMENT
Dec 7, 2009
I'm having trouble understanding how to verify the download of the Fedora iso-files. know how to do this on a Windows system. I have been looking in the help section for checking the iso-files, but I'm not sure where to find the right hashes, like MD5, SHA1, and etc.
View 6 Replies
View Related
Jun 10, 2009
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies
View Related
Sep 19, 2010
I have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
View 4 Replies
View Related
May 19, 2010
I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
View 4 Replies
View Related
Jan 14, 2010
I was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies
View Related
Feb 11, 2011
Currently I have a four partition setup: One ext4 /boot partition for Fedora, one LVM partition, one ext4 partition (which has Ubuntu), and one swap partition. What I would like to do is shrink down the ext4 partition which has Ubuntu on it and increase the size of my LVM parition (and increase the Volume Group, filesystem, etc. within the LVM). However, I've been searching on Google and the only solutions I find is to make the free/unpartitioned space and then create a new LVM partition and stretch the VG over the two LVM partitions. However, I already have 4 partitions, so I can't make the fifth one.
Is there any possible way I can increase the size of the underlying LVM partition itself?
View 8 Replies
View Related
Jun 17, 2011
I'm trying to set up my Fedora 15 installation to automatically mount (with all privileges needed for read/write access w/o a password prompt) an ext4 partition on the same HDD. Below is the output of sudo fdisk -l.
Code:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
Partition table entries are not in disk order I'm trying to automount /dev/sda8, I believe. I'll check that when I've rebooted to by Ubuntu partition, 'cause that's where I know how to do it. I tried to use pysdm, since that's what I used to do the same thing in Ubuntu, but it wasn't found by the Fedora package manager.
View 2 Replies
View Related
Apr 8, 2010
i hv 3 os installed ...windows7,ubuntu9.10 and redhat5.3can ne1 tell me how to mount ext4 partition from redhat....because after installing redhat ubuntu is not booting....or can ne1 tell me how can i boot ubuntu by editing grub.config
View 7 Replies
View Related
Jul 24, 2010
I have been trying to install windows for 15 days and I was finally able to do it by removing in "disk utility" the sign saying that the fedora partition is bootable... but I did it when the partition was active... It showed me a message error but i thought that it told me it wasn't abvle to do it... and now that windows is installed I cannot any more access the partition either in rescue mode and on a live cd ... what could I do to access the partition either to save all the files or to (it woiuld be the best) reinstall the grub ?
View 14 Replies
View Related
Oct 17, 2010
I'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
View 2 Replies
View Related
Oct 31, 2010
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
View 1 Replies
View Related
Dec 11, 2010
I just picked up a 1.5TB external drive. I want to wipe the NTFS partition (I assume that's what it is) that is there and replace it with an encrypted ext4 partition.
Is there a HOW-TO somewhere for this?
View 3 Replies
View Related
Sep 16, 2010
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
View 9 Replies
View Related
Feb 11, 2011
I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.
Tried to put WinXP on it just because I was that frustrated, no luck.
Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.
No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.
Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.
View 1 Replies
View Related
Sep 13, 2009
I just downloaded the "Fedora-11-i686-Live-KDE.iso" and "Fedora-11-i686-Live.iso". I want to check if the downloaded files correct or not. I can use a tool to get the md5 sum of the downloaded files. But I want to compare them with the original ones.
View 6 Replies
View Related
Nov 13, 2010
I've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only.
* after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
View 1 Replies
View Related
May 14, 2010
I can't seem to get past step 6 of he installation of Ubuntu 10.04. I get the error: The ext4 file system creation failed... on single partition (no raid). I chose ' / ' as the mount point, and have tried with and without a swap drive. I'm installing on a Sony VAIO VGN-NS160D, and the HDD was previously formatted to NTFS. There's no other OS so I don't see any way of getting a command line to try a sudo fdisk..
View 1 Replies
View Related
Jun 12, 2010
I just installed F13 x86_64 on a system that used to be running Windows 7.
The boot drive is a SATA drive attached to the motherboard which is working fine.
However, my data drive is an NTFS partition filling a 3.6TB SATA raid.
It's GPT--Gparted sees 3 unknown partitions, and gdisk shows:
Code:
How do I mount this in Fedora 13? I had intended to shrink the NTFS partition so that I can create an ext4 partition to move the data to. Will this be possible?
I've got a LOT of valuable data on this drive, and nothing else big enough to store it.
View 3 Replies
View Related
Oct 10, 2010
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
View 2 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
Jul 18, 2011
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
View 2 Replies
View Related
Jan 29, 2011
I want to convert a vfat partition into an ext4 partition. This is on my wife's machine and she deleted the Windoze partition as she now prefers Linux. Here is the (edited) output from fdisk -l:-
/dev/sda2 514048 4708351 2097152 83 Linux
/dev/sda3 4708352 6805503 1048576 82 Linux swap
/dev/sda4 52693200 234436544 90871672+ f W95 Ext'd (LBA)
/dev/sda5 59006800 234227699 87610446 83 Linux
I want to change /dev/sda4 to 83 to free up space for Linux without losing the partitions in this 'extended' partition!
View 6 Replies
View Related
Jun 5, 2010
This is our first time choosing and installing linux. Our other servers are all windows 2008 x64. We were told to install fedora 13. I can only find a download for the desktop version and we're looking for the SERVER x64 download. Could I please get a link?
View 7 Replies
View Related
Apr 7, 2010
As recommended, I'm creating a new thread for my configuring GRUB problems commented first hereWe are setting up a new version of a custom system, we are migrating to Ubuntu Karmic from another distribution (Slackware). Besides small differences between these systems (most of them from the most recent versions of software used by the latest Ubuntu, such as GRUB 2), it has been decided that the new system will run an union root partition using aufs and tempfs, basically, we are following the steps provided heree install the system to a new hard drive from an already running Ubuntu Karmic system, usingdebootstrap/chroot, we move the disk to another sytem, so we have to correct disk references, we are able to run this system and it behaves correctly the first time it boots, it bypasses the GRUB menu since there are no other systems detected. However, after halting the system and booting it, the GRUB menu appears with a new "recovery" option, we've managed to remove this recovery option usingGRUB_DISABLE_LINUX_RECOVERY=trueBut then, the GRUB menu appears again, this time with only one option to boot: our system installation. But when this GRUB menu appears, it has no default timeout and so it stays forever unless ENTER is pressed to boot into the selected entry.
The main problem is that we are unable to configure GRUB inside the new installation because it always returns this message:grub-probe error cannot find a device for /If we boot the system "normally" (mounting root to a normal partition), we are able to configure GRUB properly, but it does not behave the same when using the union file system as /We are only looking for a way to bypass the GRUB menu and boot our system, do you have any advice on how to properly configure the GRUB menu for our system
View 3 Replies
View Related
Jul 2, 2010
Thinking of a re-install to remove LV and use Ext4 only. [Root is too large] Can I back up Home from the LV and move it to an external drive. If so will I be able to reinstall and Custom partition so I can use Ext4 and then copy the Home files back to my new Home partition. I have only a small knowledge of LV systems so just want to be carefull.
View 1 Replies
View Related
Feb 9, 2011
I am currently running x86_64 F14. I am replacing the HDD(s) with one SSD and one HDD. What I want to do is a fresh install but pull all of the packages over from current install. I am planning on backing up /home and all of that so I can just rsync it. One of the issues though is that I currently use LVM. LVM does not support TRIM yet for the SSD. So I was just going to use ext4 and an extended partition for all of my filesystems. Can I just make a kickstart file that will have all of my current installed packages in it and pass that to the install? Seems like I remember that from my RHCE class. Sadly I don't use kickstart enough to remember.
View 1 Replies
View Related
Jun 3, 2009
will it be possible to convert existing filesystem to new ext4 while upgrading from Fedora 10?
View 1 Replies
View Related
Jun 9, 2009
I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
View 3 Replies
View Related
Jun 14, 2009
It has crashed or failed to install on a known good system for the 5th time now. I have never had that problem with fedora before. I am now installing with ext3 instead of ext4. I am hoping for better success with it and will update. I was able to try MinGW with WINE before the first crash and I liked what I saw there. Only hoping to be able to get a good install this time.
View 2 Replies
View Related
