Ubuntu Installation :: Install System Backup Made By Remastersys In EXT4
Feb 2, 2010
I have a question about ext4,remastersys backup : I have upgraded from 9.04 to 9.10 via the upgrade button in synaptics, so it means that the files system was not touched, which means that my system is still ext3 as it was when I installed the 9.04. I can make a backup of my system as it is configured right now (that's how i like it) using remastersys.
Can I install my system backup into my machine after formating it into ext4 or when I create a backup using remastersys it must stay in the files system as it was when it was backed up? The issue is that right now the 9.10 responds from some reason a little bit slower than my 9.04 responded (to everything e.g. open/close windows etc...) and I read in the forum that ext4 makes 9.10 run faster.
View 1 Replies
ADVERTISEMENT
May 2, 2011
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
View 7 Replies
View Related
Sep 16, 2010
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
View 9 Replies
View Related
Jan 13, 2011
Newly installed Lucid and several programs to get it just the way I like it. I went to make a backup of the entire system with remastersys for the second time (first time was ok) but everytime it says iso file too big, which it is at 16gb plus. I have been through and double checked that my personnel files, pics, music, movies are all removed and my virtual machine. When checking with "Disk usage analyzer" it says I have 158.8GB free but when I check the home file system itself it says I have 150.1GB free. Note the missing 8.1GB. I believe this is the root of my inability to make a backup.
View 2 Replies
View Related
Nov 1, 2010
I have tried 4 times now to install but it keeps freezing. I wiped my hdd with a tool from UBCD and im starting fresh with a full install of Ubuntu 10.10.I'm installing from a LiveCD. Should I format the hdd in some way before install?
View 5 Replies
View Related
Jan 25, 2010
I installed Kubuntu 9-10 on my laptop. I used Remastersys to make a Backup Live DVD of my installation. I cannot install this Live DVD on other machine. It boots fine on other computer. I want to know how to install this Live DVD. What is the installer for kubuntu on the HD installation called?
View 1 Replies
View Related
Jan 8, 2011
Ubuntu and its commands. how to install this app so that I can create a LiveCD.
View 3 Replies
View Related
Apr 20, 2011
I want to install software remastersys. But I am faced with this error Unable to locate package remastersys
. I'll act as follows:
View 9 Replies
View Related
Jul 16, 2010
Greetings to all from a 60-year-old computer hobbyist and Linux rookie making his first post here. Yesterday I completed a successful installation of Debian 5, lenny, and right now I want to learn what alterations or modifications have been made to my system. I have no complaint about anything at all, I just want to become prepared for any problems I might encounter later on.
1) At one point near the end of my Debian installation, I was asked whether the installer could add something into memory and I (hesitantly) let it do so without knowing what was actually being done. I have a multi-boot system with four versions of Windows installed prior to Debian ... and now my Windows 98 is able to see and access my third drive, a SATA.
Question: How did installing Debian make it possible for my Windows 98 OS to now see and access my SATA hard drive? It is my assumption Debian's installer has somewhere placed one or more drivers my BIOS/DOS now passes along at system startup. How can I make a backup of whatever Debian's installer has done there?
2) After installing Debian and my Windows 98 had begun seeing my SATA drive, I had to eventually re-install Windows 98 because the drive letter for its partition had been changed by the insertion of the SATA drive. At that same time, and while just leaving Windows 98 alone for a while, I had used NeoSmart's EasyBCD to add Debian to Windows 7's BCD ... but then my re-installation of Windows 98 over-wrote that and Windows 7's "startup repair" could never again make its own BCD work. After that, however, and after getting XP's "boot.ini" (including 98 and 2k) working again, a re-installation of Debian resulted in GRUB making a startup menu that now includes *all* systems.
Question: Why or how can/did GRUB find Windows 7 and add it in when Windows 7's "startup repair" could not make a working BCD (or could not make a BCD work) on its own? I have more questions ahead, but like I said: For now I just want to know what I have going on here so I can prepare for any problems I might encounter later. I have a lot of time invested in finally getting this multi-boot system running perfectly with Debian as its default OS and I do not want to have to go back to the beginning and do it all over again because something broke and I had no idea how to fix it!
View 10 Replies
View Related
Feb 14, 2010
i have this iso and i lost my cd but when i mount this the folder is empty but when i look inside the iso there is the install files
View 9 Replies
View Related
Feb 26, 2010
this is my structure:
[root@ iso]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
[Code]....
And I want to restore some files from /dev/VolGroup00/LogVol00.
View 14 Replies
View Related
Sep 16, 2010
I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable
View 7 Replies
View Related
Apr 8, 2010
How do you configure the system to automaticly change wallpaper and the standard Icon Theme to a custom made.
-If Im not mistaken, it must be something to do with the option to make a script at the end of the installation, -Ive seen the option in the creation,
View 4 Replies
View Related
Feb 9, 2011
I am currently running x86_64 F14. I am replacing the HDD(s) with one SSD and one HDD. What I want to do is a fresh install but pull all of the packages over from current install. I am planning on backing up /home and all of that so I can just rsync it. One of the issues though is that I currently use LVM. LVM does not support TRIM yet for the SSD. So I was just going to use ext4 and an extended partition for all of my filesystems. Can I just make a kickstart file that will have all of my current installed packages in it and pass that to the install? Seems like I remember that from my RHCE class. Sadly I don't use kickstart enough to remember.
View 1 Replies
View Related
Mar 22, 2010
I have been able to get most of the way through the process of changing from using ext4 back to using ext3, but something is not quite right so my system does not boot properly.
I have a system that was running Karmic Koala 9.10 as a server (no graphical environment). I had two drives using RAID1 with LVM on top, where the logical volumes of oldvg (old volume group) were using mostly ext4. /boot was not part of the RAID: it's on a separate physical drive and uses ext2.
I recently added two more drives and used RAID1 and LVM, and made all lv partitions (/, /usr, /var, /tmp, /opt, /home, /srv) ext3. I used rsync to duplicate the contents onto the logical volumes of newvg (new volume group). I was careful with rsync's option switches, and this part seems to be fine.
I also edited (the new) /etc/fstab and changed the UUIDs of the seven mount points to point to the logical volumes that are part of newvg instead of oldvg, and added new entries to (the new) /boot/grub/menu.lst to refer to newvg in addition to those that I left around to refer to oldvg.
This wasn't sufficient: rebooting here failed, but I went in with a rescue disk, and first updated /boot/grub/device.map to include the new physical drives. I then mounted all the new logical volumes, mounted boot also at its proper place, and entered a chroot of the new system as it should be mounted. Once there, (and after making a backup of /boot) I ran "update-initramfs -k all -c" to rebuild the initrd images that were stored on /boot. Finally, I also edited /etc/mtab so that the two entries that referred to oldvg now refer to newvg instead.
Now, the machine begins to boot from newvg, but the console text includes messages like:
And a bit later,
Now, at this shell if I type mount, I see:
I am actually confused as to why there are only entries for /root and /var in /etc/mtab, actually, instead of entries for all of the main mount points. I am thinking it must be part of the boot staging process, because there are entries for newvg-usr, newvg-tmp, etc. in /etc/fstab.
When I type any of pvdisplay, vgdisplay, or lvdisplay, I get
In fact, even if I run lvm, I get a similar error:
However, if I go back to the rescue cd, pvdisplay, vgdisplay, and lvdisplay do show that all of the partitions from both the old and new volume groups are available.
View 1 Replies
View Related
Feb 6, 2011
I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.
View 2 Replies
View Related
Feb 11, 2011
I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.
Tried to put WinXP on it just because I was that frustrated, no luck.
Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.
No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.
Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.
View 1 Replies
View Related
Sep 3, 2011
If you have a contiguous partial piece of an ext4 file system (assuming it's perfectly clean), starting from the beginning of the partition, is there any way to check it, or to mount it to get the files whose parents, inodes and data are all completely contained inside?
Have (or maybe had) a very large 11TB RAID 6 array, filled with a single large ext4 partition. Something strange happened when a single drive failed and the array ended up failing 13 out of the 11 drives. I had trouble getting the array restarted, and got to the point where I exhausted all of the options I considered completely safe. I considered a few things that may have worked, but mdadm doesn't seem to have a definite "do not change anything" option. So I decided the only way to be absolutely safe would be to clone the disks before proceeding - then I realized how much time that would take and sent the drives off to a recovery service so they could image them and check it out.
Before doing so, I copied the first 2GB from each disk. I XORd the images from the working drives to reconstruct the data chunks that were on the failed disk, manually assembled the chunks, and am very confident that I have 22GB of "correct" data in a single file. The parity and Q syndromes all matched (with RAID 6 you can still check with only 1 missing device). I've learned the fine details of ext4 from [URL], and have looked at lots of raw data from the reconstructed partition, and it all looks good. The recovery company says that they're not finding many inodes, but I found a lot of them, exactly where they're supposed to be. I tried to mount and e2fsk, but both processes seem to be extremely unhappy that the device size doesn't match the size implied by the file system geometry.
I considered hacking the superblock to manually reduce the size, but I figure that wouldn't work because there would then be more group descriptor blocks than it would expect after the superblocks. I might try doing that and compensating by incrementing the "reserve block count" to compensate. Alternatively, if there is some way to make the file appear to be the expected size with nothing but zeroes after the end of the actual data, maybe I could mount it and not get any errors until I cause the kernel to read past the true end of the file.
View 3 Replies
View Related
Sep 11, 2011
I want to convert the file system on my boot drive from ext4 to btrfs.
I have converted by 2nd drive, unsure of how to convert the boot drive and partitions.
View 3 Replies
View Related
Dec 1, 2010
How can I properly install Remastersys in Ubuntu 10.10?
View 4 Replies
View Related
Jul 3, 2011
My main hard disk died and I replaced it. After installing windows in a small partition in /dev/sda, I thought I will try linux mint and went for it. (I need windows to play AOE, but ubuntu is my primary OS)I didnt see the options properly or some distraction, I choose the "install alongside windows" option probably expecting it to install it in the unallocated partition next to the windows installation. I had completely forgotten my second internal drive /dev/sdb which has the backup data. Linux mint went and installed itself on that drive.
Is there a way to recover individual files from the second harddrive. Now if I boot or open it through live cd, all I see in the linux mint file systems. I want to aleast recover my CV/resume from the second drive. The second drive is a single ext4 file system The old drive is completely dead, it doesnt even get recognized when I attach it to SATA.
View 1 Replies
View Related
May 14, 2010
I can't seem to get past step 6 of he installation of Ubuntu 10.04. I get the error: The ext4 file system creation failed... on single partition (no raid). I chose ' / ' as the mount point, and have tried with and without a swap drive. I'm installing on a Sony VAIO VGN-NS160D, and the HDD was previously formatted to NTFS. There's no other OS so I don't see any way of getting a command line to try a sudo fdisk..
View 1 Replies
View Related
Jun 9, 2011
How would I install Remastersys on Natty 11.04?
I tried the instructions from the Remastersys website: For Karmic, Lucid and Newer with grub2 - version 2.0.13-1 and up # Remastersys deb [URL]
But, I receive an error message when the software sources reload.
View 9 Replies
View Related
Oct 10, 2010
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
View 2 Replies
View Related
May 29, 2010
I have been using Ubuntu for a while now though not heavily. I want to try out the new 10.04 as I was not all that happy with 9.10. I would like to backup my entire Ubuntu System so if the upgrade goes south like it probably will and has every time in the past that I can restore it easily. Now in Windows I would use either Paragon Backup or Comodo Backup. So, I was wondering if there is a complete backup system like this for Linux. I have looked at several, but most only back up the home directory or specific directories.
View 2 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
Mar 13, 2010
Tuesday night I wanted to make a backup of my Ubuntu ext4 partition via Clonezilla so I configured that an image had to be made and it would be saved on the NTFS external disk. But it said it needed 23 hours to create a 5gb backup, so I resetted my computer as this took too long. But after this, Ubuntu nor Windows recognized my drive.
I called Seagate and they told me after troubleshooting 30 minutes, that there is no option of fixing the drive and I had to send it to RMA. What could be wrong? Clonezilla works via a bootable ISO on Debian. The disk drive is still spinning. I already rebooted the external drive, but it's not working. In Linux the disk is no longer mounted and cannot be mounted:
Code:
brw-rw---- 1 root disk 8, 16 2010-03-12 00:50 /dev/sdb
brw-rw---- 1 root disk 8, 32 2010-03-12 00:50 /dev/sdc
brw-rw---- 1 root disk 8, 48 2010-03-12 00:50 /dev/sdd
brw-rw---- 1 root disk 8, 64 2010-03-12 00:50 /dev/sde
What could have happened? Would the data still be accessible on the internal drive? Did I just loose 1.5TB data that was stored on the external disk?
View 4 Replies
View Related
Jan 15, 2011
I wanna make a LiveUSB backup with installation usb. The problem with remastersys is the 4gb limit. I have a 32gb usb stick so that is why I wanna do it this way instead. SO, is this possible, or is CD with remastersys the only solution?
View 1 Replies
View Related
Mar 8, 2010
I have a block of 85 GB of a failed remastersys back-up and it is preventing me from up-dating my OS.
What do i do to remove this from my HD ?
View 5 Replies
View Related
May 8, 2010
I've installed Remastersys on my Dell Mini and created a custombackup.iso which which runs Ubuntu 10.04 perfectly from both CD and usb flashdrive.
However, since backing up my complete HDD a problem has arisen with my wireless connection and I now want to reinstall the cloned copy of my OS onto my HDD.
The question is: how? Whether I use Ubuntu's disk creator, unetbootin or penlinuxdrive, booting from the flashdrive does not offer me an 'install' option.
View 2 Replies
View Related
