Software :: The Equivalent Of Norton Ghost Partition>To Image?
May 29, 2011
i have two hard drives,sda sdb. sda1 contains my xp,i want to work with windows on sdb1
bcoz of performance reason. ive used partimage to create an image and restore it to
sdb2 while doing so im getting an error that the sdb1 partition is too small ..,this makes me understand that partimage copies all the partition bit by bit with probably the boot sector as well. but thats not the behaivor i want. i belive what i did so far is like doing ghost with partition->to partition. it means the destination partition shuld be greater or the same.. is there any ghost partition->to image like in linux? partimage only works on partitions?(i.e cant do disk image) i think my answer is somewhere around copy the files with cp, and tar gz them.
View 5 Replies
ADVERTISEMENT
May 19, 2010
I have a Norton Ghost .gho file, and basicly I want to extract the raw image out of this, for example to use with with tools like dd. (So using any symantec/windows tools is not an option). Is there any open source tool which can deal with these .gho files ?
(Note: the.gho file I'm using is a sector based one, and not a file-based one, which implies that things such as Ghost explorer won't work either (see this page)
View 1 Replies
View Related
Feb 15, 2010
I use Ghost 12.0 or Acronis True Image 10.0 for system backup of WinXP -> so any equivalent application for Ubuntu?
View 8 Replies
View Related
Mar 29, 2011
there i have a computer running ubuntu 9.10 set up as a server in my classroom. I have ftp http and an internal mail server set up on it as well as other settings. I really want to make a copy of the system so i have a back up of the os. i have figured out that i can attach a hdd to the computer and copy the os via the command line with an ubuntu live cd but this only works as long as the computer that is receiving the backup is exactly the same or the same computer. I would like to transfer the image to a portable hdd then install the os onto virtual box ( a virtual machine). Is there a way to do this without buying expensive software.dose ubuntu 9.10 have a product similar to Norton ghost.
View 5 Replies
View Related
May 26, 2009
I'm having a problem which seems restricted to Fedora. I'm trying to install Fedora 10 on a dual boot system. I have Windows 7 RC installed. When I boot the live CD to run Fedora, my screen ends up displaying Fedora on the left half, and bits of the Windows shut down screen on the right. I cannot access the Fedora menus, they are pushed off to the left out of view.
I previously experienced the same problem with an earlier version of Fedora, with the HD loaded with Ubuntu and Win 7 beta. Fedora would boot but display either the last Ubuntu or last Windows screen to the right, whichever had been running last. No other version of Linux exhibits this behavior that I have found, but my experience is limited. Is there a particular procedure that I need to run to get Fedora to use the entire video display? Does Fedora need to be installed first?
Hardware is: ASUS P5E VM HDMI, using the integrated graphics, display is a 32" LCD TV HDMI input, hard drive is a Samsung 500Gb.
View 1 Replies
View Related
Oct 6, 2010
Is there a software utility out there for Ubuntu that can make a backup of the hard drive my Ubuntu 10.4 is installed on?
I have used Symantec Norton Ghost for Windows before. Is there a similar program for Ubuntu? I would also like to use the backup of the hard drive to reinstall on the same drive after a format.
Also, what would happen to the GRUB loader if I were to copy it back onto the hard drive?
View 6 Replies
View Related
Nov 7, 2010
Does anybody know of a program that can make make images of the entire hard drive while it's in use? Like Ghost and Acronis can do? I have a production ubuntu system that I need backups of, however, I can't power it off.
View 8 Replies
View Related
Sep 16, 2010
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
View 9 Replies
View Related
Mar 1, 2011
I am looking for a Linux equivalent of Paragon Partition Manager. I have several computers that I maintain for work, and the ability to take the image of these computers regularly would be greatly beneficial. I was previously using Paragon Partition Manager, however I would like to know if there is a equivalent of this software that I could use. I know that GParted works excellently in the actual partition management, however it does not actually allow to to capture images.
View 2 Replies
View Related
Jan 10, 2010
Is there an all inclusion Ubuntu deb like to N/U?
View 9 Replies
View Related
Jun 7, 2010
Though not very sure with my inference, but I never had this issue while making an attempt to "Check for Ubuntu 10.04 updates" before! Refer to the attachment for detailed view. Only change I made this morning was to change the DNS addresses from that of Google's to Norton's Secure DNS vide 198.153.192.1 & 198.153.194.1!
View 2 Replies
View Related
Mar 13, 2010
I have a dedicated server that Ubuntu 9.04 operating system has been installed on it. Before this dedicated server, I had another server that according to some reasons, it was put aside and I requested my datacenter support team to attach previous server's HDD to my new server in order to transfer its information to the new server's HDD. On the disks of previous HDD, Ubuntu 8.04 LTS OS had been installed and most of its capacity was full, but while I mounted that HDD on the new server, the contents of the primary partition were visible but the contents of the extended partition weren't visible. After some inspectings, I observerd that the extended partition type is converted to LVM. Before this, I didn't deal with this kind of partition. I tried to mount this partition but I failed. I read many articles about this problem and implemented instructions on the HDD but the LVM partition was never mounted that returns many different errors and even I pursued the reasons of this errors but non of these remedies didn't solve this problem. Since the datacenter had determined a specifies time for transfering information. then I had to return the SCSI HDD on the specified time, so I was forced to make an image of the hard disk by "TestDisk" software. I've made that image from the LVM partition which its capacity amounts to 150 GB but still I'm not able to mount the image according to instructions on the different related websitres. Since I'm really dummy in Linux Fle System field, I request you to help me to mount this image or extract its contents.
View 1 Replies
View Related
Oct 30, 2010
Ok, have a system with 10.10 with the things I need, I installed this OS on a laptop which has a 40gb drive. 32-bit version. Before installing ubuntu i had Windows7 and had split the drive in 2 partitions (20/20) and currently have an image of the Windows7 OS in the 2nd partition.
Anyway, when installing ubuntu i used the 1st partition that has Windows7 OS and made 3 partitions out of it:
-12gb partition for /root
- 3gb partition for /swap
- 5gb partition for /home
In the Windows world i use Ghost utility(DOS version) to image my single Windows7 partition completely. This works fine.
Since in ubuntu we usually create multiple partitions,
1-what utility can be used to create an image of the partition ?
2-do you JUST create the image of /root ?
I really want to create an image now that i can then restore if something happens to the OS and be back in business quickly without reinstalling ubuntu from scratch.
View 3 Replies
View Related
Mar 25, 2011
I want to create a image of a partition using dd. The partition is 80GB but only 15 GB are used. I booted from a live CD and run this command to backup 20 GB
Code:
dd if=/dev/sda1 of=/mnt/backup/OLD_HDD/sda1.img bs=1M count=20480
The command finishes without problems but when I mount the image I'm cannot read the content :
Code:
# mount -o loop /mnt/backup/OLD_HDD/sda1.img /mnt/sda1/
# ll /mnt/sda1/
ls: cannot access /mnt/sda1/proc: Input/output error
ls: cannot access /mnt/sda1/usr: Input/output error
[code]....
View 4 Replies
View Related
Apr 13, 2011
have a binary image that I can copy to a partition and have done so successfully in the past. The image is smaller than the partition size, and everything is all good. However, I noticed that in copying the 5 gb image to the 9 gb partition there are 4 gb that are unnoticed by the system. It still registers the partition at the correct size in Gparted and Disk Utility.
View 3 Replies
View Related
Feb 8, 2010
I wanted to know if it is possible to mount an ISO image to a partition and boot from that instead of a CD or DVD. I know it is easy to do it from a CD but I would like to know if I can also do it this way.
View 3 Replies
View Related
Feb 5, 2010
I try to mount an image from a NTFS partition. Below is not working.
sudo mount /windows/D/img/XPLANE9.mdf /media/XPLANE9/ -t iso9660 -o ro,loop=/dev/loop0
View 2 Replies
View Related
Mar 7, 2010
I have an image of the entire disk created using dd. The disk structure follows:
The image was created using:
How would I, if it is possible, mount /dev/sda1 from the image so that I'm able to read the contents?
It's not an option to clone the HDD again, I know how to do it if I had only cloned the single partition by itself. I hope it's still possible with the current image.
View 3 Replies
View Related
Mar 10, 2011
Here is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
View 5 Replies
View Related
Mar 1, 2010
What is good program and that is easy to use to make a image of a linux partition
View 3 Replies
View Related
Sep 14, 2009
I have a lv image = /dev/vg0/server01. I create a partition using fdisk /dev/vg0/server01. Now, i have a partition under lv image = /dev/vg0/server01p1. how do i format /dev/vg0/server01p1 to ext3, it seems that the system doesn't recognize the partition under /dev. the purpose of this is to fully restore filesystem on domU (xen).
View 4 Replies
View Related
Sep 1, 2009
I have 2 partitions on my hard disk1. sda1 is ext3 partitoins with MINT linux2. sda2 ntfs partitions with my files and movies I want to copy, make backup of my sda1 partitions and store it to file (image) in some folder in sda2.In windows I have made that many times with Acronis and ghost, but I dont know how to make it in MINT.Is there some manual that explain that.
View 13 Replies
View Related
Nov 16, 2010
I downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies
View Related
May 31, 2011
i need to mount at least for read access NTFS-based partition image on linux from a file. File is binary copy of a partition. Is there any libraries or resources for this?
View 1 Replies
View Related
Aug 21, 2011
Yesterday I got my new workstation featuring:
120 GB - OCZ Vertex3 MAX IOPS
300 GB - Western Digital Velociraptor (10k RPM, about 4ms avg. seek)
2x2TB Samsung Ecogreen F4
The system will be running Ubuntu with the main purpose of doing lots of Java development. Occasionally I have to develop Java in a Windows VM; for this I need fast VMs. I read a lot about SSD wear and maybe it is a bad idea to put the Eclipse workspace on the SSD, because of all the little writes the builds do. Perhaps the workspace (and thus /home) might find a better place on the Velociraptor which is real fast. How should I partition the whole thing to get the most out of it. LVM might be an option, too. Maybe putting a third partition on the SSD for one VirtualBox image. Currently I am thinking:
SSD: 2GB /boot, remaining space for / Velociraptor: LVM spanning the whole drive. 150GB /home Remaining Space for /virtualMachines or something like that Samsung drives (LVM over both or one Volume Group for each? - Latter would be better in terms of data security, because if one drive in a big volume group fails everything is lost)
View 1 Replies
View Related
Jun 14, 2010
I am trying to recover some important data from a 273 gig NTFS partition that was used in windows 7. The laptop was dropped and would not boot the next day. As an external drive I could see 2 smaller partitions (30 gig and 500 meg), but the main partition was RAW and requesting to be formatted... so I came to learn about Knoppix 6.2.1 as my live boot cd and ran ddrescue to recover an almost complete image of the bad partitionddrescue -n /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logI then ran it one more time:ddrescue -r 1 /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logthe image was made with 741 errors (amounting to 160 megabytes)So Now I have my partition as image.img which I want to mount.
First I tried
sudo mount -t ntfs -o loop /media/sda1/image.img /mnt/recovered
sudo mount -t ntfs -o loop,force /media/sda1/image.img /mnt/recovered
[code]....
View 1 Replies
View Related
Jan 6, 2011
I recently installed Linux to run a few Linux based tools on a disk images I have, and I can't seem to copy the disk image over to my ext3 partition.
The particular distibution I'm using is BackTrack 4 r2, which is Ubuntu based. I can't seem to find specifically which version of Ubuntu is being used. The disk image is 108GB. It is currently located on a NTFS partition on a SATA hard drive connected directly to the computer. The ext3 partition is located on a second SATA hard drive connected to the same computer. It has 200GB total. I do not remember exactly how much free space it had but "df -h" showed a lot more than 108GB. The computer has 4GB of RAM and I gave it 8GB of swap space.
At this point it has been running for more than 12 hours. This is far longer than I would expect it to take had I been copying the file under Windows. How ever I do not have much experience with Linux, so if it's supose to take this long please let me know. I am planning on letting it run until I wake up tomorrow.
"cp -v" hasn't been very verbose at all. The only sign I have that indicates the computer is still trying to do something is the HDD light on my chasis that has stayed lit this whole time.
View 4 Replies
View Related
Jan 2, 2010
I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies
View Related
Feb 6, 2010
I can't seem to get rid of this ghost window on my desktop. Whatever it is, it makes it unable to move the Desktop Folder around also. Easy fix I'm hoping?
View 3 Replies
View Related
Apr 28, 2009
I would like to have your opinion on the problem : I created a ghost of my server RHEL4 with RAID 1 and 5, then I wanted to reinstall it on a virtual server under vmware.
So I restore the image on a virtual disk and qand I restart I still have this problem :
I started in linux rescue mode F5 I reinstall Grub on sda
I modified the modules.conf file to change the BusLogic SCSI, but this module is not in the kernel I used kudzu to reconfigure it doesn't works...
View 1 Replies
View Related
