I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies
Mis-allocated 10g instead of 30g to /var/lib/mysql and realized mistake After Fresh Install and upgraded all servers. Using Slackware13.1, Xfce did some googling wondering if its possible to resize the above partition with fdisk. Read some things about gparted and wonder if it will work using Xfce.. i've never use kde or gnome. There is also mention of using live cd; I have no experience with any of the mentioned tools; just fdisk to partition and install. What is the best or simplest way to backup & restore; (I do have an empty sdb 160g but don't want to get into complicated raid or LVM setups right now because I still have to learn howto backup & restore do data to the point where I feel comfortable with it)?
Current setup: sda 160gb Hdd used 73.5 for following partitions: sda1 512m /boot; sda2 Extended Rest of Hdd; sda5 1280m /swap; sda6 8g /home; sda7 2g /; sda8 8g /usr; sda9 8g /usr/local; sda10 10g /var; sda11 10g /var/log; *sda12 10g instead of 30g /var/lib/mysql; sda13 10g /opt; sda14 5g /tmp Haven't configure mysql... so /dev/sda12 is empty except for system disk data the same goes for /dev/sda13 /opt & /dev/sda14 /tmp
A while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
I have two 250 GB drives setup with hardware RAID 1. I had on sda and sdb: 20 GB swap, 20 GB /, 198 GB /srv all was good until I started to run out of space on 20 GB /. So I booted the server with Suse 11.3 live cd and reduced the size of 20 GB swap to 10 GB and 198 GB /srv to 150 GB on sda and sdb.
All good so far, then tried to increase 20 GB / to 60 GB, but the Partition setup says the Max Size can be 20 GB, I have checked and I have 42.88 GB of Unpartitioned space. I have rescanned, rebooted, Server is still running fine by the way, but the 42.88 GB of free space is not made available for the expansion of 20 GB /.
I would like to resize my /home ( /dev/sdb6 ) partition - without losing data - to make room to create a swap partition (at the moment, I don't have any swap. Is it dangerous ?) IIRC, it was possible to change partition sizes from the install disk in repair mode (?) But I cannot find that repair mode on the 11.3 install disk. Has it been removed or is it somewhere deeper in the install or update process ?
[Code]....
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
View 9 Replies View RelatedI have a 7GB unallocated space and I want to expand/increase the size of the preinstalled fedora 13 ext4 size from the unallocated space any ideas?**Using gparted live is not working is just displating the whole sda drive.
View 4 Replies View RelatedHow do I resize an ext4 partition including moving the start address? Actually what I want to do is extend the partition in front of it but that means first making space between partitions 1 and 2.As best I can tell resize2fs will resize the partition but not let me move the start addres. And fdisk will run, on say /dev/sda3 (the one I want to resize), but its default display doesn't show a start and end address which leads me to believe that fdisk isn't going to do what I want either.
View 8 Replies View RelatedI am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedAfter installing the recent kernel update and rebooting my machine I have found a horrible fact, my computer won't boot anymore. It seems my root partition was corrupted, and running fsck on it just sends me through a endless loop of "Ignore Errors {y}:" and "Force overwrite {y}:". I have already tried the use the repair system on the installation DVD but that doesn't do anything, the pop up asking if I want to repair the file system keeps coming up when I click repair.
View 1 Replies View RelatedI have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies View RelatedI have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies View RelatedSometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies View RelatedI am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
[code]....
I had dual boot win 7 and win xp, when i tried to install suse over win xp partition (i choose to format that partition during installation suse). I dont know how but suse keept win xp, and make 4 new partitions. After that i had to format whole hd, couse with partition magic i could not find that 4 partition. Now i install win 7 and win xp again, but i want to install suse instade of xp. Is there option to install suse. So i would have l 3 Os, i have laptop. Are 3os slowing comp.?
View 9 Replies View RelatedSo today I needed to switch from openSolaris to a viable OS on my workstation and decided to install openSUSE after having good experiences with it on my personal laptop. I ran into some problems partitioning one of the two hard disks installed on the system. I was limited on the amount of time I could spend at the office doing the install so I decided to use LVM on the one hard disk that seemed to work okay.
I picked LVM because although I don't know much at all about LVM, I at least know enough that it would allow me to expand the root and home partitions once I get the 2nd hard drive working correctly. So now that I've gotten the 2nd disk working okay, I've created two physical volumes on the 2nd drive, one to expand the root partition and one to expand the home partition. So, my question is, can I expand the root an home partitions while they are mounted or should I boot into a live CD environment before I expand the partitions? If I could expand them without booting into a different environment, that would be so great as I don't want to have to drive out to the office again before Monday. BTW, I am a new openSUSE user and an ex Ubuntu user. I loved the Ubuntu forums but had to switch because I do not agree with the direction that Ubuntu is taking.
i have created a logical partition of FAT type where i have copied all my data.. i want to mount it i am using the following cmd:
mount -t vFAT /dev/sda7/mnt/data
but it is temporary mounting
i would like to do permanent mounting
This is the 1st time I am installing SUSE and I wanted to clear some of my doubts:I have the following computer specs:Core i32 GB RAM320 GB HDDATI Mobility Radeon 43301. Is creating a swap partition necessary while installing Suse 11.2?2. Will I be able to install 64-bit version of Suse on my computer?3. Will I be able to run Windows 7 side by side?4. Will I have any compatibility issues with my Display Adapter since I have had problems previously on Ubuntu with my onboard ATi Graphics..
View 9 Replies View RelatedBeen happy with 10.3 and 11.3 almost ready to go over to Ubuntu due to partitioning bug in 11.4. Getting error 1007 on first partition written to disc. Abort, go to live CD keeps getting size of swap file wrong should be 2.00 GB, usually it is 2.01 GB. Deleted parts, tried to create using live CD 11.4. Same result. I create partitions first in 11.3 live CD then install 11.4 without formating. Will this work? Also issue with waening about Grub and disc size over 125 GB. New laptop Acer Aspire, will BIOS be ok. Dont want to lose win7 as OEM.
View 9 Replies View RelatedI have installed Windows 7 Professional (64 bit version), and OpenSuse 11.2 (64 bit) on to a newly built Core i5 machine. I installed Windows first, with 3 partitions. The 100MB partition Windows reserves, a C: drive for the operating system and a D: drive for data. Both of these are NTFS partitions. I then installed OpenSuse into the unallocated section at the end of the new disk drive. The Linux partitioner showed OpenSuse in an extended partition, containing a swap / /home and /tmp partition. Both operating systems now appear to be working fine, but I'm worried about the Windows Disk Manager showing that the OpenSuse partions are primary ones, and are not inside an extended partition. It only shows a small amount of unallocated space at the end of the drive as being in an extended partition.
Should I delete OpenSuse and start again? Perhaps creating an extended partition with Windows before trying to reinstall OpenSuse?If I leave the disk as it is, is it likely to continue to dual boot without something unstable occuring? It may just be a Windows problem which will not be fatal, but I'm worried all my files may get scrambled at a some point in the future.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
So I recently installed Ubuntu on a blank 250GB HD..
When I was doing the partitions I separated the / and /home and /bin etc
Ultimately I gave 30GB to my /home.
However I kind of need a bit more space now.
There is still a lot of empty space on my HD and I want to know is it possible to increase the size of my /home by about 20 GB?
I was installing ubuntu 11.04 natty narwal daily build alongside windows 7 and ubuntu 10.10, and was resizing partition when computer was taking too long to resize, i then restarted computer, my computer appears to be working, but i get no display on my monitor, even though it is powered on. getting my bios to appear, or restoring my computer to normal.
View 9 Replies View RelatedHere is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb
So I resized my partition by using these steps:
Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2
But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.
This forum might not be the best place for this question, but some people here are pretty knowledgeable and may have more insight than I do about this. Anyways, I'm thinking about expanding an NTFS (Windows 7) partition on my desktop computer into unallocated space. I know that there is a risk when shrinking a NTFS partition due to fragmentation but are there any risks of data loss from expanding a NTFS partition? My common sense tells me there isn't a risk but I want to be 100% sure I won't lose any files.
View 4 Replies View Related
