OpenSUSE :: ATI Fglrx Video Driver Install Made A Mess / How To Fix
Jun 13, 2010
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
================================================== ATI Technologies Linux Driver Installer/Packager ================================================== which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin) Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
Is there a way to permanently mess up a pre-made dvd? i would like to be able to mess up a dvd through software, that way there would be no proof of tampering. (i want a few new movies on blueray ) i would like it to run in ubuntu, but a windows program is fine. these are factory dvds btw, not dvdrw.
Just used Synaptic to update my video driver for the XFX RADEON R250x. It was working before when I had installed the drivers from the AMD site. But I was told I needed to use the kernel compatible, so I did this update. Now it boots up and hangs with blank screen where it would usually go to login. I've got a boot disc where I can boot into and we can look at the logs ....
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
My console display is hard to use and read ever since I installed the ATI fglrx driver (the problem appears with any version of the driver): ImageBam - Fast, Free Image Hosting and Photo Sharing
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
I am following the how to at ATI drivers - openSUSE and I am getting an error. I installed the opensuse 11.2 x64bit version and I have a Radeon x600 video card. When trying to install the propietary driver (which I guess I need to enable 3d HCL/ATI Video Cards - openSUSE) I get the following error:
administrator@linux-fsvg:~> su Password: linux-fsvg:/home/administrator # zypper in kernel-source linux-kernel-headers kernel-syms module-init-tools
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
I understand that the new 11.2 version has a new kernel optimized for desktop use. Can someone tell me or show me where I can find the new kernel configuration options? I would like to see what options they choose to change.
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code: ~> fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Mobility Radeon HD 4300 Series OpenGL version string: 3.3.10151 Compatibility Profile Context Shows fglrx works OK, as well as overall performance is pretty good.
I've done Code: aticonfig --initial radeon drivers is also blacklisted but running (if it means something) Code: # depmod -a; lsmod | grep radeon radeon 868858 0 ttm 64561 1 radeon drm_kms_helper 32944 1 radeon drm 221516 3 radeon,ttm,drm_kms_helper i2c_algo_bit 6728 1 radeon
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
I turned off my machine and when I turned it back on it would only boot in low res mode.I cannot 'activate' the driver, gives me an error. Tried following options in 10 different threads here,10.04, was working fine for a month or more since upgrading. ATI 5770 card, driver is latest.
I'm running 9.10 x64 version on an Athlon II x4 with 4 gigs of ram and an ATI Radeon HD 4770 card, using the fglrx driver. I'm also using Compiz.
However, I'm having a pretty major problem with video playback. Some time after starting playback, the entire system appears to freeze up. At least the video does, anyway. The audio continues to play, but the mouse is locked in place and the video frame doesn't move. I tried alt-prscr-k, but couldn't kill X. I tried ctrl-alt-f1 and f2 but again, no change. Ctrl-alt-delete had no response either. In the end, I've been having to use alt-prscr-REISUB to restart the machine.
This problem happens at unpredictable times. The other night, I watched about 1 and a half hours of DVD before it happened, and then after restarting I couldn't watch 10 seconds before freezing again. Just now, again, I started watching a video file, and the system locks up a few seconds in to the video, every time (and a different place every time).
I tried both the ati and radeonhd drivers as well, but I couldn't get the results I wanted with my 2-monitor display. I've only been able to get my monitors the way I want them using fglrx. But without being able to watch video, it's pointless anyway.
I'm lost for what to do... I've spend the last 24 hours installing and uninstalling and reinstalling the different ATI drivers over and over, only to come back to this problem. Is there something I'm missing completely?
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory patch /usr/src/linux directory copy kernel config from /boot directory make menguconfig and load config the make all make modules install i have also tried make install as well then i mopy system.map the kernel file and config file into /boot directory edit lilo reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message Code: Error: kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel. they are versioned as "" instead of "2.6.33.4-smp". you might need to adjust your symlinks: - /usr/include - /usr/src/linux ERROR: I don't have make module Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
In an attempt to install specific video drivers for the Intel 845 chipset, I followed the instructions here: http://www.downloadatoz.com/driver/a...ntu-10-04.html
Now, the system will only boot in recovery mode, and then at 640x480 resolution. When booting, it gives the option to return to default or manually configure, but if I try to select either option and click OK, nothing happens. Once in the GUI, it shows no proprietary hardware drivers installed. Is there a way to roll back the changes I made, or return to more default settings without reinstalling the OS?
From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
I was having issues with xscreensaver, desktop background and VLC all cutting out at same or different times and narrowed it down to "possibly" compiz or the FGLXR ATI driver that was recommended for my ATI HD3200 card. So, without knowing better, i went into hardware settings and removed the proprietary driver and did a reboot thinking the system would come back up and default back to a vanilla driver. No dice. Hello white screen of death! So, i am assuming that I can just reinstall via terminal and life will be good again? So, looking for CLI commands via terminal for reinstall.. (if possible)
I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
I recently installed Ubuntu 8.10 on my pc. I am running a Matrox Millenium G400 Dual-head video card. I am trying to install the driver, so I went to the matrox website and downloaded the latest driver for linux. The only problem is, I have no idea how to install it . I am new to linux so the readme file did not help much, as I am unfamiliar with terminal.
I have an older Dell Latitude (with an atitude). I noticed that scrolling down web pages and such has been painfully slow. I didn't have that problem with Windows installed and so it just goes to reason that the video driver is not right. I selected "display driver update" (or something like that) from one of the menus. It saw that I needed an update to the nVidia driver. I authenticated the request and it downloaded and supposedly installed the update. Now I have no video. I get the splash screen and the start-up scripts but then after it loads, it goes black.
I'm not the sharpest knife in the drawer with Linux because I've primarily been an operator with it for years. I never had any admin privileges until I finally decided to install it on my home systems. That being said, what do I need to do to get this to work?
I am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command: ./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output: Created directory fglrx-install.oFbosX Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801 Generating package: Debian/testing cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory Package build failed! Package build utility output: ..... dh_install: Compatibility levels before 5 are deprecated. cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1 make: *** [binary] Error 2 dpkg-buildpackage: error: debian/rules binary gave error exit status 2 Removing temporary directory: fglrx-install.oFbosX