Ubuntu Networking :: When Install Into A Clean Ext4 Partition, Have Zero Internet Support?
Jul 26, 2011
I have tried countless things and am at a complete loss. I'm pretty new to Ubuntu and Linux in general, just so everyone knows. Here's my problem: I can run the 10.10 install disc as a Live CD and have perfectly functional internet. However, when I install into a clean ext4 partition, I have zero internet support. I have Googled the heck out of this problem, too.I've tried tinkering with IPv6 settings, I've tried scouring my BIOS for anything relating to "Wake-on-LAN" (It's enabled in Windows 7, by the way, which is what I dual-boot into), and several other network-related ideas I've read online. None have had any effectEDIT: Additional details: ethernet worked like a champ in 10.04, and in 10.10 when I did an upgrade instead of a clean install. I had this same ethernet problem in a clean 11.04 install (which also worked in Live CD form), too, which is why I tried 10.04 to begin with.
View 9 Replies
ADVERTISEMENT
Apr 2, 2010
I recently bought a new HDD for my server and I now need to create two differently sized ext4 partitions. I tried GNU parted, but it can't create ext4 partitions so I did some googling but couldn't find any CLI partition managers with ext4 support
Btw, the server is running Ubuntu 9.10 x64 Server.
View 2 Replies
View Related
Apr 20, 2010
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies
View Related
Apr 28, 2011
installed ubuntu 10.10 via wubi but no uninstall in add and remove windows 7 so how do i remove safely so to do a clean install of 11.04 by doing a partition
View 2 Replies
View Related
Jan 7, 2010
I made an upgrade from Kubuntu 9.04 to 9.10 and this upgrade generated a series of permission problems.
Considering that I have an individual /home partition, I am planning to make a clean install of Karmic (9.10) on a laptop with a 230GB hard disk and 2GB RAM.
The actual hard disk is mounted the following way:
In total there are some 230GB of Hard Disk available.
The fat 32 partition was not a good idea, because I can't access it from the file manager, so I will dump this partition on my next installation.
Now my question: What partitions would you recommend to mount and what size would you give to each partition?
View 4 Replies
View Related
May 19, 2010
I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
View 4 Replies
View Related
Mar 1, 2010
I guess it's time to move up to Ubuntu 9.10 from 9.04 ...unless you would advise me to stay with 9.04. Either way, I would like to do a clean install. I managed to create a separate partition for /home almost a year ago ... now the only thing I want to keep inside /home is one big folder which I already had made a backup copy with several DVDs (larger than 4GB). Besides that large folder, I would like to start everything new. This would be my second time installing and it has been quite awhile. Here are my questions:
1. I know I have backup DVDs in hand. But sometimes DVDs are funky. I would restore my files with DVDs as last resort. So, should I just delete all files and folders (including hidden ones) under /home except a large folder that I would like to keep? If so, can I do that while on a normal gnome session or am I better off doing it while on Live CD?
2. I see a suggestion that when installing Ubuntu, I need to make sure to mount /home but NOT FORMAT IT. Is there a visual tutorial or step-by-step guide showing how to do this?
3. Are there other gotchas like I need to "create" user name the exact same spelling as old user name that is already created under /home on my harddrive?
View 3 Replies
View Related
Jan 14, 2010
I was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies
View Related
May 17, 2011
I have a PC that has 10.04 installed and no other operating system. The 1 TB hard disk has two partitions:
* 940 GB NTFS for data storage
* 50GB ext4 (which has 10 GB extended and 10 GB sawp)
The system has become sluggish and slow and browsers and so on often "hang" for a few seconds prior to executing. There is an epiphany dependency problem that I cannot solve.
My questions are:
1. Is it possible to do a clean install on the 50GB partition from a live CD?
2. Is it better to do this than upgrade to 10.10 and thence to 11.04? [When I ungraded like this in the past, I had problems, so I would prefer a clean install].
3. If it is possible to do a clean install on the 50GB partition, should I reformat the partition and if so, can I do that from the live CD?
View 5 Replies
View Related
Mar 24, 2010
After installing the recent kernel update and rebooting my machine I have found a horrible fact, my computer won't boot anymore. It seems my root partition was corrupted, and running fsck on it just sends me through a endless loop of "Ignore Errors {y}:" and "Force overwrite {y}:". I have already tried the use the repair system on the installation DVD but that doesn't do anything, the pop up asking if I want to repair the file system keeps coming up when I click repair.
View 1 Replies
View Related
Nov 11, 2010
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
View 7 Replies
View Related
Jan 1, 2011
I have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies
View Related
Jun 10, 2009
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies
View Related
Jan 4, 2010
Sometimes openSUSE boot ends with these errors:[url]
(I do not know why it prints an error on Ext2 filesystem when the disk is formatted Ext4...)
[url]
Here is my Fstab:
Code:
View 9 Replies
View Related
May 1, 2010
I installed opensuse 11.2 some 6 months ago as an alternative to windows 7, on a 44GB partition. Having become my primary OS, I am looking forward to expand the ext4 partition from 44GB to the maximum possible. I have some 24GB unpartitioned space, and free space on NTSF partitions (one of which could be deleted if necessary). What is the best and safest procedure to perform the partitioning.
View 8 Replies
View Related
May 22, 2011
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies
View Related
May 12, 2011
Kubuntu 10.04, i386, new install. Can't access EXT4 partition on same HDD. Celeron, desktop.
View 14 Replies
View Related
Feb 6, 2011
I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.
View 2 Replies
View Related
Sep 16, 2010
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
View 9 Replies
View Related
Feb 9, 2011
Some times ago i add Tumbleweed repo to my Open Suse 11.3 64bit system & try to update. On every update with kernel by zypper up it make output like this
[code]....
View 9 Replies
View Related
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Jul 18, 2011
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
View 2 Replies
View Related
Jan 6, 2010
I have slackware 13 ext4 partition. Debian lenny ext3 partition. and a /data ext3 partition Debian contains the grub boot loader i've been using to boot slackware. I'm going to wipe debian and I installed grub to /data with knoppix cd. Grub on debian booted into slackware just fine, but the grub I installed (onto data partition) with knoppix live cd does not find the slackware kernel. I am using the exact same menu.lst. apparently debian grub had ext4 support, but knoppix does not. both are grub .97. Is there a way to add ext4 support?
View 1 Replies
View Related
Sep 19, 2010
I have an external 320gb Hard drive. My plan was to have 250gb for My Documents of mainly music, films and word documents. And 50gb set aside for ubuntu, in a separate partition.To do this I need to partition the 50gb partition as ext4? then add a swap file of how big? Do i even need a swap space if I have 4gb of physical RAM?
View 4 Replies
View Related
Aug 27, 2010
I thought I'll be smart, and installed squeeze on ext4 partitions ( boot-ext2, root-ext4, home-ext4 and swap). With my Lenny (ext3), I use partimage to backup the / partition, and rsync to backup my /home files. Now, I found out that partimage does not work with ext4. Are there other GNU packages I can use to backup my / partition?
View 2 Replies
View Related
May 14, 2010
I have created 700 GB ext4 logical partition on my HDD. It is named sda7. Now I don't have read/write permissions, only root has those permissions.
How to change read/write permissions and how to mount it permanently?
View 3 Replies
View Related
Jan 29, 2011
I want to convert a vfat partition into an ext4 partition. This is on my wife's machine and she deleted the Windoze partition as she now prefers Linux. Here is the (edited) output from fdisk -l:-
/dev/sda2 514048 4708351 2097152 83 Linux
/dev/sda3 4708352 6805503 1048576 82 Linux swap
/dev/sda4 52693200 234436544 90871672+ f W95 Ext'd (LBA)
/dev/sda5 59006800 234227699 87610446 83 Linux
I want to change /dev/sda4 to 83 to free up space for Linux without losing the partitions in this 'extended' partition!
View 6 Replies
View Related
May 19, 2011
Here is my output of lspci:
Code:
$ lspci
01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller (rev 10)
I connected via ethernet just fine, but wireless is crucial for this laptop, and the additional drivers GUI program says nothing (or at least it finds nothing).
Am a bit stuck on what to do?
View 9 Replies
View Related
Oct 15, 2010
Yesterday I upgraded to Ubuntu 10.10 by a clean install. My laptop is an acer aspire 5050 with a IEEE 802.11 b/g Wlan wireless card. I am using only Ubuntu in my laptop. Today I noticed that wireless is dead. The indicator is off and I can see that there is not detection of any wireless networks in the "Wireless Networks" menu. In this point I must inform you that I didn't experience any wireless problems with the two previous versions of Ubuntu (9.10 & 10.04). Below you can see the outputs (in italic format) of some commands that I peformed in terminal:
*1st command
sudo ifconfig -a:
eth0 Link encap:Ethernet HWaddr 00:1b:24:6b:03:1d
inet addr:192.168.2.3 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::21b:24ff:fe6b:31d/64 Scope:Link
[code].....
View 9 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
