Having read and attempted several theories on how to resolve this issue to no avail.
Code:
root@bt:~# lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
Trying this on a Lenovo with 10.04. but after a few updates and some basic software (restricted extras) the network manager is missing. I tried installing WICD but that doesn't show up either. Going to the startup applications, it is listed and checked, and dragging it to the panel works, but clicking it does nothing.
View 2 Replies View RelatedI use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies View RelatedI somehow lost wicd. the icon is still at the bottom of the screen, but show "no networks present.' When I run iwfonfig as root it shows eth0 and lo, but no wlan0. When i run iwconfig, it says eth0 and lo with "no wireless extensions."
View 10 Replies View RelatedI installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies View RelatedI have just installed Ubuntu 9.10 (64 Bit) and I'm trying my best to get this Linksys WMP300N wireless adapter to work.I have searched and gone through a number of threads here with some level of progress but I still can not get this to work.Adapter info is BCM43XG [14e4:4329] rev 01I have installed driver bcmwl5.inf using ndiswrapper and ndisgtk.I had absolutely no success trying to use network manager applet so uninstalled it and went with Wicd instead which at least sees my SSID network with a strong signal.My network is encrypted using WPA and I entered the passphrase which seems to pass authentication but it keeps trying to get an IP address until finally it just tosses a failed message.I feel as though I'm really close but it just won't connect.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
i just install ubuntu on my home computer and i have wine also install and i also have utorrent on the ubuntu os utorrent is runing but not showing in the top bar what can i do to see utorrent on the top bar its runing but i cant use it
View 2 Replies View RelatedI have a 64bits laptop with dual boot (Vista + Ubuntu 9.10) and nVidia chipset. Earlier, I could connect to internet using both the OSs. But now, when I insert the network cable (RJ-45) in the network port, neither of the OSs recognises the network cable. When I click (left click) the network icon in ubuntu (in the right top corner of the desktop), it does not show any available ethernet connection.
I checked in BIOS also there is no mention of network card. Following are the details of the laptop:
eth0 Link encap:Ethernet HWaddr 00:22:20:06:ac:19
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]...
I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
I have installed the Fedora 14, and a Dlink usb wireless adapter (DWA-125) with rt2870 chipset, but this one isn't working with my OS.
I typed the lsusb command
Code:
Bus 001 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
I downloaded the drivers from YUM, the rt2870 and also kmod-rt2870. I thing that this step is ok.
I typed the dmesg | grep 2870 command
Code:
[21421.956342] usbcore: registered new interface driver rt2870
When I open the /proc/modules file, it shows the line bellow
rt2870sta 542230 0 - Live 0xffffffffa02fc000
[Code].....
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies View RelatedI have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:
After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.
It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s
I've compiled and installed my rt2870sta.ko and the firmware to the correct locations but my ubuntu 10.10 is loading the one under
/lib/modules/2.6.38-25-generic/kernel/drivers/staging/rt2870/rt2870sta.ko.
How do I get it to use the correct driver? I've attached a screenshot of the module info.
I have a Sparklan WUBR-502GN USB dongle with the RT2870 chip. It has worked, (with a little effort) of previous installs of 9.04, 9.10, 10.04 and 10.10. However it refuses to work in 11.04. I followed the same procedures, (blacklisting, confirming device ID, modifying config.mk and rt_linux.h, sudo make & make install and removing staging/rt2870), outlined in past forum articles and that worked in the previous RCs, but the connection to my home network will not complete. Has something changed in 11.04 that is substantially different from past releases?
P.S. the only thing I haven�t done, since 11.04 was only installed moments before, is do the build essential and headers.
I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.
View 1 Replies View RelatedI don't know if this is the right place to post this.
When I transfer my .ogg music files to my cowon s9, it doesn't recognise the tags so all I see is "unknown" for album, song and artist. I have tried retagging using easytag but it still shows up as unknown but when I converted an album to mp3, the tags automatically showed up.
I know it would be easier just to convert all my songs to mp3 but the reason I chose the cowon was its ability to play .ogg files, my preferred choice of music file.
The odd thing is I had a D2 until I lost it and that showed the tags ok.
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies View RelatedI just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.
Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.
since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies View RelatedI have been searching through the forums and looked at this SDB:ASUS WL-160N USB Wireless Adapter - openSUSE and I am still having problems getting my ralink rt2870 wireless adapter working.
I compiled the driver from source and when I tried to use insmod it said rt2870sta.ko already exists. So I thought it should be working. I did an lsmod to see if it had started up and rt2870sta showed up as having been loaded, however so did rt2800usb rt2x00usb and rt2x00lib. I have tried starting up the computer with these blacklisted but that didn't help anything. As of now the rt2800usb seems to be controlling my wireless card. Using iwconfig the chip shows up as wlan0 instead of ra0 but iwlist scan appears to be working although my network isn't showing up. I have copied RT28670STA.dat to /etc/Wireless/RT2870STA/RT2870STA.dat and configured it as well. Running lsusb the chip shows up as simply Linksys (it is a linksys adapter with ralink chipset).
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies View RelatedAlright yall, I just got my wireless usb device to work on ubuntu 10.10. I did alot of searching and I finally figured it out. this is what I did.
1.Download the linux drivers from this post, its called Ralink_RT3572USB_drv2400.zip
2.Extract them to a directory.
3.Make sure you have build-essential installed on your computer. you can do this by opening a terminal
and typing
Code:
sudo apt-get install build-essential
4.Now install linux headers so that you can compile the drivers.
Code:
sudo apt-get install linux-headers-$(uname -r)
5.Now in your terminal goto where you extracted the Ralink_RT3572USB_drv2400 files.
once in that directory type
[Code]...
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
I have been installing via wiki instructions and I am stuck installing a USB wireless. Where should I be going with this?
PHP Code:
debianportable:/home/dave# modprobe rt73usb
debianportable:/home/dave# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies View RelatedI am using a Sparklan WUBR-505N abgn USB dual band stick for the wireless connection on one of my Fedora 12 laptops. I have an Apple Airport Extreme BaseStation that can advertise
a 5GHz connection ie it broadcasts two sids... The network manger only see the 'regular' sid and the usb stick only connects in the 2.4GHZ frequencies. Does the rt2870 driver support the 5GHz frequencies? If so how can I force a 5GHz connection?
I seem to be missing some step(s) for getting an interface to appear in the output of ifconfig and
iwconfig for a RT2870 wireless USB 802.11n adapter (made by Panda Wifi). Let me step you
through what's I've done thus far.
After plugging the device in, it's low-level identification is as follows (see bold):
root@xps720# lsusb
Bus 002 Device 002: ID 046d:0b06 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
This is a mutation of; Help, my wireless .... I read the stickies and hope to provide enough info. Because we had problems getting a Linksys device working (it worked, but after that it failed) on openSUSE 11.3, my friend (the system owner) bought a Eminent EM4554 Wifi 150N forgetting to ask me to look in the HCL. On looking through the Eminent web-site I discovered they have a Linux tarball for it, but I prefer to look for an openSUSE ready solution first. The tarball showed that it is about a Ralink RT2870 chipset.
lsusb:
Code:
Bus 002 Device 002: ID 148f:3070 Ralink Technology, Corp. I added the download.opensuse.org/repositories/driver:/wireless/openSUSE_11.3/ and the update of that repos. On starting YaST > Software > Software Management it offered several packages for installation that all seemed related to this subject and came from those repos, so I installed them. I did not install the ralink-firmware package because that warned that it would remove the kernel-firmware package.
[Code]...