Ubuntu Networking :: Wicd Network Indicator Does Not Show Up
Apr 28, 2011
I use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies
ADVERTISEMENT
May 10, 2010
Trying this on a Lenovo with 10.04. but after a few updates and some basic software (restricted extras) the network manager is missing. I tried installing WICD but that doesn't show up either. Going to the startup applications, it is listed and checked, and dragging it to the panel works, but clicking it does nothing.
View 2 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Jul 23, 2010
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
View 9 Replies
View Related
Sep 9, 2009
I'm using Debian Lenny and installed wicd package.It does not ask me for the credentials and i can't find where to define them?!
View 1 Replies
View Related
Dec 31, 2010
I have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
View 1 Replies
View Related
Jan 4, 2011
I had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
View 1 Replies
View Related
Mar 27, 2010
I installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.
Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.
View 9 Replies
View Related
Jan 1, 2011
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies
View Related
Jul 7, 2011
I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies
View Related
Apr 29, 2011
In my Ubuntu 11.04, the IBus Indicator does not show. How to correct it?
View 2 Replies
View Related
Mar 16, 2010
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies
View Related
Apr 4, 2011
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
View 1 Replies
View Related
Oct 18, 2010
Ever since I upgraded to 10.10 my Indicator Applet will no longer notify me of new mail. I'm not sure if this is an issue caused by the update of Ubuntu or Evolution.
I've tried removing and adding it again, but no luck. Anyone else having this problem or have a fix?
Running !0.10 Desktop
View 4 Replies
View Related
Mar 31, 2010
i am using lucid beta 1 and indicator applet shows my user name. i know it is also the case for karmic. is there any way to change it so that it shows my full name? because it looks much more formal if it shows my full name instead of my "nickname".
View 2 Replies
View Related
Jun 23, 2010
the default battery indicator does not show percentage of how much battery left, is there a way to make it show or another indicator that does that? (using lenovo thinkpad sl500, lucid x64)
View 2 Replies
View Related
Mar 11, 2011
In ubuntu 11.04 unity, i miss the icon to show the desktop with just one click (like in the gnome-panel).
Is there a possibility to get the "show desktop"-indicator?
View 9 Replies
View Related
Dec 23, 2010
Having read and attempted several theories on how to resolve this issue to no avail.
Code:
root@bt:~# lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 7 Replies
View Related
Dec 4, 2010
I somehow lost wicd. the icon is still at the bottom of the screen, but show "no networks present.' When I run iwfonfig as root it shows eth0 and lo, but no wlan0. When i run iwconfig, it says eth0 and lo with "no wireless extensions."
View 10 Replies
View Related
Jan 16, 2011
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
View 4 Replies
View Related
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
View 1 Replies
View Related
Apr 22, 2010
I just got Ubuntu and I feel like there is going to be a really simple solution but right now I cannot find any information on a solution. I run 9.10 desktop i386 or w/e and I have a wireless connection. The network does not show up when I go the network manager to select a network. No networks show up and all it lets me do is create a new network connection which I have no idea how to do. I think it might have to do with my device recognition, but the network is fine it is just Ubuntu.
View 4 Replies
View Related
Sep 11, 2010
I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies
View Related
Sep 1, 2011
I'm on Windows 7 64bit and Ubuntu 11.04 64bit.Windows is on a net book with not so much hard drive space so I want to keep all my music and movies on my hard drive of my Ubuntu desktop. When I try to find my Ubuntu machine I get nothing though..No matter what though, Win7 simply will not see it on the network. Not even when I run "\ipadress"..If anything is there away to delete everything related to Samba and start over?
View 3 Replies
View Related
Jun 8, 2011
Is there a command that display all network info. I'm looking for ip address, subnet mask, gateway, and dns. If there isn't a single command could someone please write me a shellscript that can do this?
View 3 Replies
View Related
Feb 10, 2010
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies
View Related
Jun 8, 2010
im just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.
View 9 Replies
View Related
Jan 9, 2011
I have a simple problem where Windows machines can connect to shares on my Fedora server (via SAMBA), but only when using the IP address. When Windows users to go Network (in Vista and 7) or Network Places (XP), then all computers on the network show up in that window except for the Fedora server. How can I get my server to appear in that space? Although I can connect via IP address, we are using some programs that can only find shares by the computer name (aka if it's found in the Network window). I have checked and rechecked that the workgroup name is indeed correct.
View 3 Replies
View Related
Jan 9, 2011
how to switch to it because i keep getting my connection dropped with the default network manager. he said to make sure i was plugged in via ethernet, purge network manager - then apt-get WICD. the problem is, not even ethernet works once network manager is purged.
so - before i try this i wanna know, can i just download WICD before hand, then purge network manager, then install WICD. OR, can i just install WICD now, then once i purge network manger it will move over to WICD as the default?
how should i go about changing to WICD?
it has to be a driver thing, its happened on multiple installs - on network manager and on WICD
it usually happens (or at least more often) when im streaming a live feed from a website, and it doesnt reset itself unless i turn the computer OFF (not restart) and back on
basically what happens is, with both the network manager and WICD - the wireless just cuts out and stops detecting any network at all, disconnected. i have tried terminating the process and restarting the applications via terminal or run command; i dont know what to do it just keeps happening. sometimes it wont happen for 2 days, sometimes it happens five times in one day.
it really seems to be affected by what im doing on, sometimes i'll have multiple videos going and it starts to chug, and i know when its gonna happen - wifi cuts out. it doesnt DROP, it just stops working, detecting networks.
like i said, even restarting doesnt fix this. i have to quit the application, turn the computer on and off - then boom its right back on when it comes back.
so strangeeee.
so far i've had 3 ubuntu problems in the week i've had it.
1. this
2. "couldnt update .ICEauthority" at login
3. and this made me have to reinstall yesterday - nothing i would install would run anymore, no errors, no processes - i just click the icons and nothing happens.
View 9 Replies
View Related
Jul 1, 2010
I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
View 11 Replies
View Related
