Fedora Hardware :: Rt2870 Wireless Usb Don't Working?
Nov 16, 2010
I have installed the Fedora 14, and a Dlink usb wireless adapter (DWA-125) with rt2870 chipset, but this one isn't working with my OS.
I typed the lsusb command
Code:
Bus 001 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
I downloaded the drivers from YUM, the rt2870 and also kmod-rt2870. I thing that this step is ok.
I typed the dmesg | grep 2870 command
Code:
[21421.956342] usbcore: registered new interface driver rt2870
When I open the /proc/modules file, it shows the line bellow
rt2870sta 542230 0 - Live 0xffffffffa02fc000
[Code].....
View 1 Replies
ADVERTISEMENT
May 13, 2010
I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
View 9 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Sep 2, 2010
I seem to be missing some step(s) for getting an interface to appear in the output of ifconfig and
iwconfig for a RT2870 wireless USB 802.11n adapter (made by Panda Wifi). Let me step you
through what's I've done thus far.
After plugging the device in, it's low-level identification is as follows (see bold):
root@xps720# lsusb
Bus 002 Device 002: ID 046d:0b06 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Mar 4, 2011
I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies
View Related
Apr 22, 2011
I've compiled and installed my rt2870sta.ko and the firmware to the correct locations but my ubuntu 10.10 is loading the one under
/lib/modules/2.6.38-25-generic/kernel/drivers/staging/rt2870/rt2870sta.ko.
How do I get it to use the correct driver? I've attached a screenshot of the module info.
View 9 Replies
View Related
Jan 7, 2010
I have been searching through the forums and looked at this SDB:ASUS WL-160N USB Wireless Adapter - openSUSE and I am still having problems getting my ralink rt2870 wireless adapter working.
I compiled the driver from source and when I tried to use insmod it said rt2870sta.ko already exists. So I thought it should be working. I did an lsmod to see if it had started up and rt2870sta showed up as having been loaded, however so did rt2800usb rt2x00usb and rt2x00lib. I have tried starting up the computer with these blacklisted but that didn't help anything. As of now the rt2800usb seems to be controlling my wireless card. Using iwconfig the chip shows up as wlan0 instead of ra0 but iwlist scan appears to be working although my network isn't showing up. I have copied RT28670STA.dat to /etc/Wireless/RT2870STA/RT2870STA.dat and configured it as well. Running lsusb the chip shows up as simply Linksys (it is a linksys adapter with ralink chipset).
View 9 Replies
View Related
Dec 16, 2010
This is a mutation of; Help, my wireless .... I read the stickies and hope to provide enough info. Because we had problems getting a Linksys device working (it worked, but after that it failed) on openSUSE 11.3, my friend (the system owner) bought a Eminent EM4554 Wifi 150N forgetting to ask me to look in the HCL. On looking through the Eminent web-site I discovered they have a Linux tarball for it, but I prefer to look for an openSUSE ready solution first. The tarball showed that it is about a Ralink RT2870 chipset.
lsusb:
Code:
Bus 002 Device 002: ID 148f:3070 Ralink Technology, Corp. I added the download.opensuse.org/repositories/driver:/wireless/openSUSE_11.3/ and the update of that repos. On starting YaST > Software > Software Management it offered several packages for installation that all seemed related to this subject and came from those repos, so I installed them. I did not install the ralink-firmware package because that warned that it would remove the kernel-firmware package.
[Code]...
View 9 Replies
View Related
Nov 7, 2010
Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
View 9 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Jun 26, 2010
I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
View 2 Replies
View Related
May 1, 2011
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies
View Related
Oct 4, 2009
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies
View Related
May 22, 2010
I just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.
Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.
View 5 Replies
View Related
Jun 16, 2010
since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies
View Related
Jan 26, 2010
I am using a Sparklan WUBR-505N abgn USB dual band stick for the wireless connection on one of my Fedora 12 laptops. I have an Apple Airport Extreme BaseStation that can advertise
a 5GHz connection ie it broadcasts two sids... The network manger only see the 'regular' sid and the usb stick only connects in the 2.4GHZ frequencies. Does the rt2870 driver support the 5GHz frequencies? If so how can I force a 5GHz connection?
View 5 Replies
View Related
Dec 26, 2009
I recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies
View Related
Oct 10, 2009
I un-installed ndiswrapper. Now my wireless is not working. How do I re-engage the native Linux driver? In gnome in network manager my USB wireless device is not being picked up.
View 2 Replies
View Related
Dec 27, 2009
I have just installed fedora 12 on my dell studio 15 laptop and cant seem to get the wireless working, I have done some research and it appears to be the fact i have a broadcom card. there are various ways to fix this problem one been installing ndiswrapper but all the threads on this are way to technical for me as I am a complete linux newb,
View 14 Replies
View Related
Mar 18, 2009
I have tried endlessly and unsuccessfully to make my wireless work.When I try to activate the device I got the message "Determining IP information for wlan0...SIOCSIFFLAGS: No such device"...I had the following output for /sbin/lsmod | grep iwl3945iwl3945 170340 0
which meant my drivers are fine.I downloaded firmware iwlwifi-3945-ucode-15.28.2.8.tgz from intel website which is the latest and put the required file in /lib/firmware/When I checked the sevices to restart the Network Manager and Network Manager Dispatcher I could find only Network Manager service running. I tried installing Network Manager Dispatcher via an RPM but it didnt appear in the list of services.
View 11 Replies
View Related
Feb 16, 2009
Have tried both Mythdora 10.21 32bit and 64bit (Fedora 10)o get my wireless to work.Have looked at output from various suggested commands and logs and nothing jumps out. Would appreciate any suggestions. Have attached log with all commands identified and output. Wired ethernet works with no problem.
The router shows no connection activity on the wireless portion from the Linux box. I do have a laptop that I have connected to the router before and after attempting to connect with the Linux system.The only out of the ordinary message I see is (from dmesg):wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
----------------- uname -a command -------------------------------
[mythtv@EcsA780GM ~]$ uname -a
Linux EcsA780GM 2.6.27.12-170.2.5.fc10.x86_64 #1 SMP Wed Jan 21 01:33:24 EST 2009 x86_64
[code]...
View 7 Replies
View Related
Apr 29, 2009
Does anybody know how to make the wireless card working on Fedora 9? I have followed the instruction from [URL] and have B43 driver installed with reset after. The driver install went fine, but where can I enable the wireless on desktop?
View 3 Replies
View Related
Nov 3, 2009
Is there some simple step by step way to get the wireless card intel 3945abg to work?
View 4 Replies
View Related
Sep 3, 2010
My wireless card is a Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54 Mbps Network Adapter.Wireless Internet worked just fine in Fedora 10 and is working just fine in Fedora 11, however, when I installed Fedora 12, it just wouldn't work. It would state that the Wireless Networks were disconnected and wouldn't allow me to enable Wireless or to enable Networking. had to revert back to Fedora 11 (where the wireless Internet was working once again)I have since made a Live CD of Fedora 13, but I had the same problem. Would it be that these newer versions of Fedora don't have the driver for this card? If so, is there a way to install it or to check?
View 1 Replies
View Related
Sep 7, 2010
I have a Netbook Emachines EM250, i have a wireless card broadcom 802.11g, and a Fast Ethernet PCI-E Atheros AR8132 Fedora can't seem to find any wired or wireless connections.
View 6 Replies
View Related
Sep 17, 2010
I have install fedora and then updated using yum, then try to install the wireless card on my netbook, emachines EM250, the wireless Broadcom Corporation BCM4312 802.11b/g LP-PHY the thing is that when i try using yum install kmod-wl or pae it says that i need kernel 2.6.34.6-47.fc13.i686, and i have currently 2.6.34.6-54.fc13.i686 so how can i install my wireless card i have try with diferent commands and nothing.
View 2 Replies
View Related
Oct 22, 2010
Supported chipsets:
8188
8191
Terry Polzin on the Fedora list today posted a request for help with getting a Realtek 8188S(U) working. I replied saying that I had a similar device and shared my experiences.
I told him that there is a driver in staging which supports the device, but that Fedora only ships quality working drivers by default, so no staging drivers are included. It's easy enough to get them though, just add the RPMFusion Free repository and install their kmod-staging package which (as the name might give away) includes the staging drivers for the current kernel.
Once you have that installed, the r8192s_usb module can be loaded, but the device still needs external (presumably proprietary) firmware to work. Fortunately, although the driver available from Realtek does not include it, it was included on the disk, and is also available in the Billion driver from their website. So, once you have put the firmware in the right place, the device just works.
Here are the steps to get it working (you will need to have RPMFusion enabled, and run these as root).
Code:
yum install kmod-staging unzip
depmod -a
wget http://au.billion.com/downloads/3011N/3011N_Linux_Driver.zip
unzip -j 3011N_Linux_Driver.zip "*rtl8192sfw.bin" -d RTL8192SU
[Code].....
The main downside here (apart from the obvious) is that you will be relying on RPMFusion to build an updated kmod-staging version when you get a Fedora kernel update. Sometimes this might not happen before you get your kernel, so when you reboot, you lose your wireless (because there's no driver). If so, boot to your older kernel for a while, or build the driver yourself, or create an akmod instead of kmod.
View 5 Replies
View Related
May 6, 2011
I can see the wireless networks option in NetworkManager, but I can't detect any networks.I did a fresh installation of F14. Wireless wasn't working, so I set up kmod-wl and broadcom-wl for my kernel version as per the HOWTO on this forum. lsmod | sort shows wl as loaded, no conflicting drivers.iwlist scan:"Failed to read scan data: Invalid argument"lspci shows BCM4313 802.11b/gI've tried everything I can find online, and nothing seems to be working.
View 4 Replies
View Related
Jul 4, 2011
I have just installed to Fedora 15 on my x86_64 bit laptop and my wireless broadcom driver has stopped working.lspci output:
Code:
08:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
[tm2383@localhost ~]$
[code]....
View 2 Replies
View Related
Aug 27, 2009
Today I updated my system, I noticed that KDE would be upgraded to 4.3. Upon restart of my computer my wireless didn't work (and still doesn't) and I cannot use the desktop effects anymore (probably the graphics driver). Is there any way I can fix those problems, or downgrade my system so everything just works? I'm using Fedora 11 KDE (64-bits). And I've kept a list of all updates. Ok, I figured that it was a different version of the kernel, the update set the other kernel to default. I'm back to 2.6.29.6-217.2.8.fc11.x86_64 and everything works.
View 14 Replies
View Related
