Ubuntu Networking :: 10.10 - Wireless Using Staging USB RT2870?
Apr 22, 2011
I've compiled and installed my rt2870sta.ko and the firmware to the correct locations but my ubuntu 10.10 is loading the one under
/lib/modules/2.6.38-25-generic/kernel/drivers/staging/rt2870/rt2870sta.ko.
How do I get it to use the correct driver? I've attached a screenshot of the module info.
View 9 Replies
ADVERTISEMENT
Jan 3, 2011
about 10 days ago i have update my f14 with the last kernel , but now i have some dependency problem and my wireless doesn't work with the new kernel ...
Code:
[root@atom ~]# uname -a
Linux atom 2.6.35.9-64.fc14.i686 #1 SMP Fri Dec 3 12:35:42 UTC 2010 i686 i686 i386 GNU/Linux
[root@atom ~]#
[root@atom ~]#
[code].....
View 3 Replies
View Related
May 13, 2010
I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
View 9 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Mar 4, 2011
I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies
View Related
Nov 16, 2010
I have installed the Fedora 14, and a Dlink usb wireless adapter (DWA-125) with rt2870 chipset, but this one isn't working with my OS.
I typed the lsusb command
Code:
Bus 001 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
I downloaded the drivers from YUM, the rt2870 and also kmod-rt2870. I thing that this step is ok.
I typed the dmesg | grep 2870 command
Code:
[21421.956342] usbcore: registered new interface driver rt2870
When I open the /proc/modules file, it shows the line bellow
rt2870sta 542230 0 - Live 0xffffffffa02fc000
[Code].....
View 1 Replies
View Related
Jan 7, 2010
I have been searching through the forums and looked at this SDB:ASUS WL-160N USB Wireless Adapter - openSUSE and I am still having problems getting my ralink rt2870 wireless adapter working.
I compiled the driver from source and when I tried to use insmod it said rt2870sta.ko already exists. So I thought it should be working. I did an lsmod to see if it had started up and rt2870sta showed up as having been loaded, however so did rt2800usb rt2x00usb and rt2x00lib. I have tried starting up the computer with these blacklisted but that didn't help anything. As of now the rt2800usb seems to be controlling my wireless card. Using iwconfig the chip shows up as wlan0 instead of ra0 but iwlist scan appears to be working although my network isn't showing up. I have copied RT28670STA.dat to /etc/Wireless/RT2870STA/RT2870STA.dat and configured it as well. Running lsusb the chip shows up as simply Linksys (it is a linksys adapter with ralink chipset).
View 9 Replies
View Related
Sep 2, 2010
I seem to be missing some step(s) for getting an interface to appear in the output of ifconfig and
iwconfig for a RT2870 wireless USB 802.11n adapter (made by Panda Wifi). Let me step you
through what's I've done thus far.
After plugging the device in, it's low-level identification is as follows (see bold):
root@xps720# lsusb
Bus 002 Device 002: ID 046d:0b06 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
View 2 Replies
View Related
Dec 16, 2010
This is a mutation of; Help, my wireless .... I read the stickies and hope to provide enough info. Because we had problems getting a Linksys device working (it worked, but after that it failed) on openSUSE 11.3, my friend (the system owner) bought a Eminent EM4554 Wifi 150N forgetting to ask me to look in the HCL. On looking through the Eminent web-site I discovered they have a Linux tarball for it, but I prefer to look for an openSUSE ready solution first. The tarball showed that it is about a Ralink RT2870 chipset.
lsusb:
Code:
Bus 002 Device 002: ID 148f:3070 Ralink Technology, Corp. I added the download.opensuse.org/repositories/driver:/wireless/openSUSE_11.3/ and the update of that repos. On starting YaST > Software > Software Management it offered several packages for installation that all seemed related to this subject and came from those repos, so I installed them. I did not install the ralink-firmware package because that warned that it would remove the kernel-firmware package.
[Code]...
View 9 Replies
View Related
Nov 7, 2010
Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopÅ› internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
View 9 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Jun 28, 2011
I have a Sparklan WUBR-502GN USB dongle with the RT2870 chip. It has worked, (with a little effort) of previous installs of 9.04, 9.10, 10.04 and 10.10. However it refuses to work in 11.04. I followed the same procedures, (blacklisting, confirming device ID, modifying config.mk and rt_linux.h, sudo make & make install and removing staging/rt2870), outlined in past forum articles and that worked in the previous RCs, but the connection to my home network will not complete. Has something changed in 11.04 that is substantially different from past releases?
P.S. the only thing I haven�t done, since 11.04 was only installed moments before, is do the build essential and headers.
View 9 Replies
View Related
May 13, 2010
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies
View Related
Mar 6, 2011
Alright yall, I just got my wireless usb device to work on ubuntu 10.10. I did alot of searching and I finally figured it out. this is what I did.
1.Download the linux drivers from this post, its called Ralink_RT3572USB_drv2400.zip
2.Extract them to a directory.
3.Make sure you have build-essential installed on your computer. you can do this by opening a terminal
and typing
Code:
sudo apt-get install build-essential
4.Now install linux headers so that you can compile the drivers.
Code:
sudo apt-get install linux-headers-$(uname -r)
5.Now in your terminal goto where you extracted the Ralink_RT3572USB_drv2400 files.
once in that directory type
[Code]...
View 9 Replies
View Related
Apr 19, 2011
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
View 9 Replies
View Related
Jun 26, 2010
I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
View 2 Replies
View Related
May 1, 2011
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies
View Related
Oct 4, 2009
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies
View Related
Jun 16, 2010
since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies
View Related
Apr 8, 2011
I have 3 translation tables,i.e,camp_generic_trans
camp_generic_trans_def
camp_generic_trans_epc
these tables exist in cntr1/cntr1@camABC1
I have to copy these tables from here to staging environment.
I need to first check if any of the tables exist in staging.If yes,then delete and create new. There are 4 staging env from 5 to 8.
I have to pass the staging environment as parameter to ask the user which environment does he want the tables to be copied.
View 1 Replies
View Related
Feb 22, 2010
I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.
View 1 Replies
View Related
Nov 22, 2009
I have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:
After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.
It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s
View 1 Replies
View Related
Dec 23, 2010
Having read and attempted several theories on how to resolve this issue to no avail.
Code:
root@bt:~# lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 7 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
May 22, 2010
I just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.
Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.
View 5 Replies
View Related
Jan 12, 2011
I have been installing via wiki instructions and I am stuck installing a USB wireless. Where should I be going with this?
PHP Code:
debianportable:/home/dave# modprobe rt73usb
debianportable:/home/dave# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
View 14 Replies
View Related
Jan 26, 2010
I am using a Sparklan WUBR-505N abgn USB dual band stick for the wireless connection on one of my Fedora 12 laptops. I have an Apple Airport Extreme BaseStation that can advertise
a 5GHz connection ie it broadcasts two sids... The network manger only see the 'regular' sid and the usb stick only connects in the 2.4GHZ frequencies. Does the rt2870 driver support the 5GHz frequencies? If so how can I force a 5GHz connection?
View 5 Replies
View Related
Jul 8, 2010
After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
View 3 Replies
View Related
Mar 30, 2010
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies
View Related
Jul 21, 2010
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies
View Related