Ubuntu Networking :: Railink Rt2870 Won't Connect In 11.04

Jun 28, 2011

I have a Sparklan WUBR-502GN USB dongle with the RT2870 chip. It has worked, (with a little effort) of previous installs of 9.04, 9.10, 10.04 and 10.10. However it refuses to work in 11.04. I followed the same procedures, (blacklisting, confirming device ID, modifying config.mk and rt_linux.h, sudo make & make install and removing staging/rt2870), outlined in past forum articles and that worked in the previous RCs, but the connection to my home network will not complete. Has something changed in 11.04 that is substantially different from past releases?

P.S. the only thing I haven�t done, since 11.04 was only installed moments before, is do the build essential and headers.

View 9 Replies


ADVERTISEMENT

OpenSUSE Wireless :: Can't Connect Asus N13 Wifi Dongle (Ralink RT2870 )

Nov 7, 2010

Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopÅ› internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )

Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.

[Code]...

View 9 Replies View Related

Ubuntu Networking :: 10.10 - Wireless Using Staging USB RT2870?

Apr 22, 2011

I've compiled and installed my rt2870sta.ko and the firmware to the correct locations but my ubuntu 10.10 is loading the one under
/lib/modules/2.6.38-25-generic/kernel/drivers/staging/rt2870/rt2870sta.ko.
How do I get it to use the correct driver? I've attached a screenshot of the module info.

View 9 Replies View Related

Ubuntu Networking :: RT2870 Driver Installed But Still No Internet

May 13, 2010

I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.

View 1 Replies View Related

Ubuntu Networking :: Install AE1000 Rt2870 On Xubuntu?

Mar 6, 2011

Alright yall, I just got my wireless usb device to work on ubuntu 10.10. I did alot of searching and I finally figured it out. this is what I did.

1.Download the linux drivers from this post, its called Ralink_RT3572USB_drv2400.zip

2.Extract them to a directory.

3.Make sure you have build-essential installed on your computer. you can do this by opening a terminal
and typing
Code:
sudo apt-get install build-essential
4.Now install linux headers so that you can compile the drivers.
Code:
sudo apt-get install linux-headers-$(uname -r)
5.Now in your terminal goto where you extracted the Ralink_RT3572USB_drv2400 files.
once in that directory type

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Compiling Rt2870 Driver From Source

Apr 19, 2011

I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:

[Code]...

View 9 Replies View Related

Fedora Networking :: Getting RT2870 Setup On Fc11?

Jun 26, 2010

I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.

[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site

/lib/firmware/rt2870.bin

I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.

View 2 Replies View Related

Fedora Networking :: Installing The RT2870 Driver In 14?

May 1, 2011

i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install

View 1 Replies View Related

Ubuntu Networking :: Belkin N150 Wireless USB Adapter Rt2870 Not Working?

May 13, 2010

I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.

Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

View 9 Replies View Related

Fedora Networking :: Rt2870/WUSB600N Not Running On Startup?

Oct 4, 2009

my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards

View 2 Replies View Related

Fedora Networking :: F12 2.6.32.14-127 Kernel Update Has No Rt2870 Module?

Jun 16, 2010

since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround

View 3 Replies View Related

Fedora Networking :: Setting Up F10 For Wireless Connection (Ralink RT2870)?

Apr 20, 2009

I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.

View 11 Replies View Related

Fedora Networking :: Setting Up A Dlink Dwa125 RT2870 USB Wireless Connection?

Mar 4, 2011

I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?

View 5 Replies View Related

General :: Rt2870/wusb600n V.2 Not Detected By Ubuntu 9.10?

Feb 22, 2010

I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.

View 1 Replies View Related

Fedora Hardware :: Rt2870 Wireless Usb Don't Working?

Nov 16, 2010

I have installed the Fedora 14, and a Dlink usb wireless adapter (DWA-125) with rt2870 chipset, but this one isn't working with my OS.

I typed the lsusb command

Code:
Bus 001 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
I downloaded the drivers from YUM, the rt2870 and also kmod-rt2870. I thing that this step is ok.

I typed the dmesg | grep 2870 command

Code:
[21421.956342] usbcore: registered new interface driver rt2870
When I open the /proc/modules file, it shows the line bellow
rt2870sta 542230 0 - Live 0xffffffffa02fc000

[Code].....

View 1 Replies View Related

OpenSUSE Network :: Ralink Rt2870 Too Slow With 11.2

Nov 22, 2009

I have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:

After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.

It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s

View 1 Replies View Related

Hardware :: Rt2870 - Unable To Show In Wicd?

Dec 23, 2010

Having read and attempted several theories on how to resolve this issue to no avail.

Code:

root@bt:~# lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[code]....

View 7 Replies View Related

Fedora X86/64bit :: FC12 Rt2870 Drivers - Built Into DVD ISO?

May 22, 2010

I just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.

Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.

View 5 Replies View Related

OpenSUSE Wireless :: RT2870 Can't Get Compiled Drivers To Work

Jan 7, 2010

I have been searching through the forums and looked at this SDB:ASUS WL-160N USB Wireless Adapter - openSUSE and I am still having problems getting my ralink rt2870 wireless adapter working.

I compiled the driver from source and when I tried to use insmod it said rt2870sta.ko already exists. So I thought it should be working. I did an lsmod to see if it had started up and rt2870sta showed up as having been loaded, however so did rt2800usb rt2x00usb and rt2x00lib. I have tried starting up the computer with these blacklisted but that didn't help anything. As of now the rt2800usb seems to be controlling my wireless card. Using iwconfig the chip shows up as wlan0 instead of ra0 but iwlist scan appears to be working although my network isn't showing up. I have copied RT28670STA.dat to /etc/Wireless/RT2870STA/RT2870STA.dat and configured it as well. Running lsusb the chip shows up as simply Linksys (it is a linksys adapter with ralink chipset).

View 9 Replies View Related

General :: Installing Ralink Rt2870 Rt3070 On Portable?

Jan 12, 2011

I have been installing via wiki instructions and I am stuck installing a USB wireless. Where should I be going with this?

PHP Code:

debianportable:/home/dave# modprobe rt73usb
debianportable:/home/dave# iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.

[Code]....

View 14 Replies View Related

Fedora Hardware :: Does The Rt2870 Driver Support 5Ghz Channels

Jan 26, 2010

I am using a Sparklan WUBR-505N abgn USB dual band stick for the wireless connection on one of my Fedora 12 laptops. I have an Apple Airport Extreme BaseStation that can advertise
a 5GHz connection ie it broadcasts two sids... The network manger only see the 'regular' sid and the usb stick only connects in the 2.4GHZ frequencies. Does the rt2870 driver support the 5GHz frequencies? If so how can I force a 5GHz connection?

View 5 Replies View Related

Fedora Hardware :: Interface For A RT2870 Wireless USB Adapter Not Being Configured?

Sep 2, 2010

I seem to be missing some step(s) for getting an interface to appear in the output of ifconfig and
iwconfig for a RT2870 wireless USB 802.11n adapter (made by Panda Wifi). Let me step you
through what's I've done thus far.

After plugging the device in, it's low-level identification is as follows (see bold):

root@xps720# lsusb
Bus 002 Device 002: ID 046d:0b06 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[Code]....

View 2 Replies View Related

OpenSUSE Wireless :: Eminent EM4554Wifi 150N (RT2870) Not Seen By YaST?

Dec 16, 2010

This is a mutation of; Help, my wireless .... I read the stickies and hope to provide enough info. Because we had problems getting a Linksys device working (it worked, but after that it failed) on openSUSE 11.3, my friend (the system owner) bought a Eminent EM4554 Wifi 150N forgetting to ask me to look in the HCL. On looking through the Eminent web-site I discovered they have a Linux tarball for it, but I prefer to look for an openSUSE ready solution first. The tarball showed that it is about a Ralink RT2870 chipset.

lsusb:
Code:
Bus 002 Device 002: ID 148f:3070 Ralink Technology, Corp. I added the download.opensuse.org/repositories/driver:/wireless/openSUSE_11.3/ and the update of that repos. On starting YaST > Software > Software Management it offered several packages for installation that all seemed related to this subject and came from those repos, so I installed them. I did not install the ralink-firmware package because that warned that it would remove the kernel-firmware package.

[Code]...

View 9 Replies View Related

Hardware :: No Wifi With Ralink Rt2870 After Kernel Panic And Reboot

Jul 8, 2010

After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.

Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.

I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.

Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s

[Code].....

View 3 Replies View Related

Ubuntu Networking :: Wireless Can't Connect - (Toshiba Laptop 10.04 64 Bit) Hanging When Trying To Connect

Jun 12, 2010

My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.

View 1 Replies View Related

Ubuntu Networking :: Unable To Connect To Wireless But Can Connect To Wired

Nov 2, 2010

I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.

View 9 Replies View Related

Ubuntu Networking :: Cannot Connect To Wired And Wireless In 10.10 It Tries To Connect But Fails?

Jan 10, 2011

in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315

View 9 Replies View Related

Ubuntu Networking :: Unable To Connect To The Internet But Can Connect To The Router

Apr 6, 2011

I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.

[Code]....

View 5 Replies View Related

Ubuntu Networking :: Connect To The Internet Through Wifi, But Cannot Connect To Anything On Network?

Aug 8, 2011

I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.

View 9 Replies View Related

Ubuntu Networking :: Internet - Cannot Connect - But Can Connect Through XP On VMware

Aug 15, 2010

I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.

However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.

Here are some outputs:

I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved