since the release of the 2.6.32.14-127 kernel a couple of days ago I can't use my wireless adapter (rt2870 based) since there isn't a kmod-rt2870 package released for this kernel.Normaly I found that the kmod package was available the same day as the kernel. Does anyone know why there is such a delay this time? Or if there is a workaround
View 3 Replies
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
View 2 Replies View RelatedJust updated the kernel to 2.6.32.22 as requested by Update Manager, and was rebooted into low graphics mode, the nvidia kernel module failed to load.I tried installing the linux-headers-2.6.32.22 but this made no difference. This could get ugly if such an early update mucks up
View 9 Replies View RelatedI'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
Squeeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 Replies View RelatedI've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies View Relatedmy wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies View RelatedCode: Installing : kernel-PAE-2.6.31.6-145.fc12.i686 49/109
W: Possible missing firmware aic94xx-seq.fw for module aic94xx.ko
W: Possible missing firmware ql8100_fw.bin for module qla2xxx.ko
Is this going to nuke my kernel update and if at all possible how do load these files to do this update over?
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies View RelatedI am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies View RelatedAfter having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
Everything worked fine on kernel 2.6.33-6.But since the update to kernel 2.6.33-8, not always but nearly everytime I resume from suspend, my wireless network is disabled.When I right click the tray Icon the "Enable Networking" box is unticked and greyed out.Only a reboot brings networking back
View 14 Replies View RelatedIn the latest Fedora 11 updates, kernel 2.6.30.5-43.fc11.x86_64 breaks broadcom-wl functionality on my BCM4312 wifi adapter
Code:
$ lspci -v | awk '/Ether|Net/,/^$/'
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Dell Device 01f1
Flags: bus master, fast devsel, latency 64, IRQ 17
[code]....
and all is well, the modprobe commands can go in /etc/rc.local. BCM43xx *.inf driver for ndiswrapper (32 and 64 bit)here:
(kmod-wl-2.6.30.5-43.fc11.x86_64-5.10.91.9-4.fc11.2.x86_64 is installed)
I recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.
I got a engineering sample wifi card - Intel wimax 5350. This card work well with kernel 2.6.28-15-generic and earlier kernels.
However after kernel 2.6.28-16 , this card no longer support by newer kernel.
the error is "Unsupported EEPROM VER=0x21b < 0x21e CALIB=0x4 < 0x4"
I knew the reason is that card is a Engineering sample .. it should not get support in newer version kernels.
What i try to think is that "is it possible to replace old wifi module into the new wifi module in new kernel " and the system can also get works !?
Below is message of dmesg.
------------------ Kernel version : vmlinuz-2.6.28-15-generic
[ 11.683885] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 11.683888] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[Code]....
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View Relatedwhat is name of modules in kernel for wireless and lan driver ?
View 1 Replies View RelatedI opened a socket with sock_create()... bind() listen() accept().
Then, the far end closes the connection.
I want to close the near end, so I can re-open for the next connection.
But there is no close(), and sock_release() crashes the kernel.
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
The problem I'm facing is that I can't use my headphone. Sound works, but not the headphone. See my ealier thread. It was suggested to edit the module options, but I don't quite know which buttons to push.
View 6 Replies View RelatedSound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.
It seems that Fedora 12 has sever problems with Intel Sound cards.
I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.
Here follows the logs containing the crash info.
WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1
BUG?
[Code]....
getting KVM Kernel modules installed under Fedora 14? I'm trying to do a post-installation setup of KVM. I'm getting the "No package kmod-kvm available." error, when doing "yum install kmod-kvm".
View 1 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View RelatedI wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I had the 180.xxx nvidia drivers on my FC10 setup.I installed the 185.xxx and am running into issues. It gives me the fatal server error: no screens found message. Before that it says that the nvidia kernel module is 180.xxx and the driver component has 185.xxx. I can't seem to figure out how to uninstall the previous module to make this work. I removed the yum kmod nvidia. I'm running this using sh nvidia.185xxx.xxxx.run . The weird thing is that it sometimes would work but then I would restart and it would break again.
Thanks in advance,
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
I want to do some modules development in fedora 11, by the command uname -r, I get the current kernel running in my system.
Code:
$ uname -r
2.6.30.10-105.2.23.fc11.i686.PAE
But when I run the following command
Code:
# yum install kernel-devel
the package what I installed is kernel-devel-2.6.30.10-105.2.23.fc11.i586 and kernel
development directory is /usr/src/kernels/2.6.30.10-105.2.23.fc11.i586
So,the modules I developed can't insert to current running kernel because current is i686 and the compile environment is i586. Is that a bug of fedora 11?
I am new to fedora core and needs desperate help.Now what i can notice is the kernel files doesnot match. will this makes a difference..what do you think ? How can i make the VirtualBox kernel module status [OK] ?
View 5 Replies View Related
