Fedora :: Could Not Connect To Wicd's D-Bus Interface - Check The Wicd Log For Error Messages

Jul 1, 2010

I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:

Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.

View 11 Replies


ADVERTISEMENT

Fedora :: SELinux Blocking Wicd - Couldn't Connect To Dbus Interface And The Wicd Deamon Has Shut Down

Dec 17, 2010

I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?

View 1 Replies View Related

Ubuntu Networking :: Can't Connect To Wicd's D-bus Interface / Make It Possible?

Mar 12, 2010

I've installed ubuntu 9.10 using a minimal install and started from there installing the rest of the things I needed.
I'm running KDE4.4 and Wicd 1.6.1.

Problem is, wicd worked fine, but I don't know what happened before I got this annoying problem.

After logging into KDE, wicd asks me for my password in order to connect to the network-device. After filling that in, I get the message code...

As you can see in the logging, internet is working fine. I manually have to start wicd-client and I get an extra wicd-icon in the taskbar showing me the signal strength as it should do.

I've been searching a lot, but can't find anything about this, except a lot of people having the same errormessage, but they have some errors in the wicd.log too.

View 2 Replies View Related

Networking :: Can't Use Wicd-gtk Because Wicd Won't Work With Ad-hoc Networks

Apr 4, 2011

I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.

The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area

[Code]...

View 1 Replies View Related

Debian :: Wicd Cannot Connect To Wireless?

May 2, 2011

I recently installed wicd on a notebook with Squeeze. I can connect to the wireless network at my place. However I cannot connect at my friend's place. It timed out with the message: "Connection failed. Cannot obtain ip address."

It is a Thomson router/modem and the key is a 10 digit 64bit Hex. I did not see 64bit Hex option in wicd. So, I tried all 3 WEP options and none of them worked. We can connect to the same network with another computer with Squeeze and NM and also with Windows. This is the first time I am using wicd.

View 2 Replies View Related

General :: NM And WICD Cannot Connect To WEP / WPA 2 Wireless

Sep 27, 2009

Newish to linux, been using Ubuntu for about a year, moved onto Sabayon 4.2 now. I also have another laptop with Kubuntu that is using Network Manager, it has no problem connecting to my wireless, one wireless uses WEP and one uses WPA 2. When my main laptop used Ubuntu it was using Network Manager, that connected with no problem. However Sabayon seems to have a problem. Initially I thought it was the DVD that I used to install it in, but after re-burning it and installing from fresh the problem still remains. What happens is that NM when connecting to a wireless prompts for a passkey, I enter it in and it fails right away.

This happens for WEP and WPA. If the network is unsecure then it connects with no problem. So I emerged WICD 1.6 to see if that would work, it hangs on 'Obtaining IP Address'. If I put static IP then it connects, but this cant be an option as at my University campus I cant set a static IP. I have tried to find the log file for NM, but cannot locate it. I understand that it should be located in /var/log/daemon.log, but daemon.log does not exist on my system. I checked every NM directory and could not find any log files. I have tried changing the settings in WICD to no effect.

View 3 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless Using Wicd?

Jun 25, 2011

I am running Natty on a Lenovo T410. I can connect to wireless with no problem using the panel applet but not using wicd. syslog shows it trying to get a DHCP address and finally timing out with no lease offers. I think a big clue is that if I monitor wlan0 using wireshark I get no traffic at all when it tries to connect, whereas with the applet I see the dhcp traffic. It seems as though wicd is connecting to the wrong wlan0. Running "dhclient wlan0" directly gives the same behavior as wicd. I need to use wicd because I typically run enlightenment so can't use the ubuntu applet.

View 5 Replies View Related

Networking :: Wicd Will Not Connect To Particular Wireless Internet

Dec 25, 2010

I'm at a family member's house for the holiday and was trying to use their wifi. Its a WEP connection (I tried to tell them to change but they won't listen). In the wicd connection manager, I see their network, set the encryption to WEP (passphrase), enter the password, and hit connect. It says bringing up the card, checking authentication, then gets to Acquiring IP address, sits there for a minute, then times out saying unable to connect.

I know I used the right password because it passed the Authenticating part (tested with a wrong password that hangs at this point). I know that my wifi card works because I used a store's unsecured wifi connection through wicd. I know the wifi network works because my brother's windows netbook can get on just fine. I'm running through the same router right now with a wire instead. Why I can't connect wirelessly?

View 4 Replies View Related

OpenSUSE Wireless :: Wicd Connect To Essid But No Internet?

Jun 19, 2010

I had a wireless connection to open suse from last year. I then had a problem with my Netgear 824 router.
I have reconnected to windows vista. Now I have to get opensuse working on wireless. I do not have much experience in opensuse I have read the forums and the sticky and also from wicd forums. I have checked the yast settings and it is for AR242x ath0 and Wired L2 100 eth0.

Details:-
Opensuse version 11 ,2.6.25-1.1 default
Laptop ASus F5RL
Atheros AR242x
I have done the following:-

[Code]...

View 1 Replies View Related

Ubuntu Networking :: Wicd Won't Connect After Suspend / Resume?

Apr 10, 2010

i just installed ubuntu 9.10 netbook remix on my acer aspireone ao532h netbook, and so far, it's been working beautifully. much better than the windows 7 starter edition that came with the machine. the only problem i've experienced so far had to do with the wireless connection. initially, the connection would drop during certain types of activities (e.g. downloading updates or programs, or even streaming videos videos) and the network manager would freeze so completely that i'd have to hard reboot. that seems to have been fixed by installing wicd (following a suggestion here: http://ubuntuforums.org/showthread.php?t=1135723&page=2), meaning that it hasn't disconnected in the several hours since i've been using it. however, wicd has a different problem: it disconnects after a suspend / resume cycle. this requires a reboot to fix also, as not only does it disconnect, but it looses awareness of the network altogether. obviously, this could be a real headache on a netbook that gets closed and opened frequently.

View 2 Replies View Related

Ubuntu Networking :: WICD Will Not Connect Without Network-manager?

Jul 23, 2010

I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.

This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?

I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)

Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c

[Code]...

View 9 Replies View Related

Slackware :: Upgraded WICD - Cannot Connect To Wireless Point

May 24, 2011

I just upgraded to 13.37, and for some reason wicd now cannot connect to my wireless point. It keeps saying the password is wrong, when I know for an absolute fact that it is correct (even changed the password to '1' just to make sure, and no dice. Which is weird because even though its the exact same version of wicd, and not only that, it no longer seems to be able to see networks with my built in card, so having to use a USB card. Anyway, googling turned up very little. Seems to be a common problem across distros, and some people reported that downgrading to 1.6.x fixes it.

So, I ran
Code:
removepkg wicd
And it uninstalled wicd. Downloaded wicd-1.6.2.1-x86_64-1.txz from a 13.0 mirror and did

Code:
installpkg wicd-1.6.2.1-x86_64-1.txz
While in the correct directory. It installed, and I ran wicd. But checking the version number when it loaded, it says its 1.7.0 again.

Not really sure why this happens. I'm assuming there's some remnant of wicd that removepkg doesn't dump, and its preventing me from installing this older version of wicd. What do I need to do for this? If anyone has a surefire way to make 1.7 work again, that would be fine.

View 7 Replies View Related

Ubuntu :: Removed Network Manager (Wicd) - Now Can't Connect To Internet

Jul 3, 2010

Removed Network Manager (Wicd) - Now Can't Connect To Internet

View 1 Replies View Related

Slackware :: Wicd In Current Won't Connect To Wireless Network - Fixed It With Rebuilding?

Mar 5, 2010

After I upgraded to current(Tue Mar 2 19:07:31 UTC 2010), I could not connect to any wireless network. It will always failed in obtaining IP address. When I rebuild the package and upgrade with the new one, the problem gone. Also I notice that the package I rebuild is different with the one on the stock tree:

Code:

..ckware-mirrors/slackware64-current% md5sum /tmp/wicd-1.7.0-x86_64-1.txz
446ff631eee4c862263ad0488e3a38be /tmp/wicd-1.7.0-x86_64-1.txz
grissiom 2010-03-05 17:21 @darkstar

[code]....

View 6 Replies View Related

Slackware :: Suddenly Lost Several Binaries And Wicd 'couldn't Connect To DBus Client'

Jun 19, 2011

I was playing around with bash scripting and the last thing I remember doing was checking for suid root files. However now I cannot launch sbopkg, tpfand etc and the binaries are nowhere to be seen. I was experimenting with the sticky bit for tpfand so I could load it as a normal user.

Code:
chmod u+s /usr/sbin/tpfand
chmod u-s /usr/sbin/tpfand
However now tpfand is no long in /usr/sbin. But a whereis produces the following results.

Code:
tpfand: /etc/tpfand.conf /etc/tpfand.conf~ /usr/share/tpfand

The same applies for sbopkg, which I have not touched. I think this problem is also related to the wicd error stating it cannot connect to DBus client From these symptoms has anybody experienced anything like this before from tinkering?

View 1 Replies View Related

Ubuntu Networking :: Getting Bad Password Error From Wicd Network Manager On Encryption

Jan 1, 2011

Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.

View 1 Replies View Related

Fedora :: Install Wicd On F11 Or A Link To An Rpm?

Jun 10, 2009

how to install wicd on F11 or a link to an rpm? All the guides available dont seem to work on F11.

View 11 Replies View Related

Fedora :: Cannot Completely Stop Wicd Starting?

Dec 4, 2009

After experimenting with wicd I've gone back to network manager. All is well on the networking front however I am having trouble stopping wicd completely.I've stopped it starting up the daemonchkconfig --list | grep wicdreturns emptybut when my kde windows starts up the wicd try icon start up.

View 9 Replies View Related

Fedora :: Self-load Wicd In The Root Terminal ?

Oct 12, 2010

When I upgraded to the latest Wicd, it wouldn't load automatically in the startup as it did before.

So I removed the startup entry and am currently having to enter the following commands to get Wicd loaded and get online.

In short, what is the correct procedure to get Wicd loading in the startup?

View 6 Replies View Related

Fedora Networking :: Replacing NetworkManager With Wicd?

Jul 14, 2011

i'm trying to replace default F15 NetworkManager with wicd. i installed wicd and used "chkconfig NetworkManager off" to disable NM but the problem i'm getting is

1. after each reboot i have to start wicd manually from su. any solution to get it loaded automatically?

2. also as i stopped nm, i have no network shortcut in taskbar, anyway wicd icon can be integrated in taskbar?

View 1 Replies View Related

Ubuntu Networking :: Network-manager And Wicd Can See But Not Connect To Network

Jul 10, 2010

I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".

I've found many, many threads with people who had the same problem, but none of their fixed worked for me.

I also tried to get wifi going manually, using this guide, but that didn't work.

View 3 Replies View Related

Ubuntu Networking :: Network Manager - Wireless Connection - Dell Laptop Error Wicd States "Wrong Password" Which Is Not True

Jun 11, 2010

These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.

Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?

[Code]...

I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.

View 1 Replies View Related

Debian :: Wicd Not Getting Ip Address?

Sep 13, 2010

I don't know much about networking... I have Debian Lenny and use wicd to connect to my wireless. Yesterday, I changed my ISP and now I cannot connect to the wireless signal, only to the wired. It had happened before that it took some tries to connect to a new network, but, after a few tries, it would connect. And then it would always connect at once. But now, it always gets stucked on the obtainment of the ip address. The same routher gives me a perfect wired connection... My wife has Ubuntu and she got it working right away, so it's not a password or router problem...

View 11 Replies View Related

Ubuntu :: Wicd Can't Get Online?

Jun 5, 2010

my problem: i am using unbuntu 9.10 on a dell 1420 inspiron laptop. i wanted to uprage to the new version of linux "lynx" . while i was doing that a problem occurred while downloading the new packages. It said that what i have already downloaded would be saved but i had to restart the download--so far no real problem. When i restarted my computer, wicd wanted to access my internet card interface, or something like that, and asked for my password, i gave it, and then wicd said it couldnt connect to my internet card and i needed to check the wicd error log. everytime i restart my computer i go through the same process and always end up with NO INTERNET CONNECTION WHATSOEVER, not just wireless, wired connections dont work.

i hope that was clear. the reason i was upgrading to lynx was because wicd had problems in the first place, but now i cant get on the net in any way with my laptop--so how do i fix the problem? should i burn an iso of the new linux and then stick that on my machine to uprgade? or is there another way. The main goal of mine is to have a laptop with linux that can wirelessly access the internet.

If i didnt provide enough info, i'm sorry(i'm young, but computers are pretty baffling sometimes) or if you want me to do something i can post the results, but i dont know any codes and can't find the error log for wicd.

View 4 Replies View Related

Slackware :: Wicd Client Gtk: How To Get Rid Of It

Nov 12, 2010

on my laptops I used to use Wicd with the Gtk GUI. However, now there is a KDE client, which I want to use instead, from now on:

Wicd Client KDE

I installed it, and it works quite well, so far. However, whenever I logon to a KDE session, the older Gtk client is started, too. I then have both Wicd clients sitting next to each other on my panel bar, and I have to manually kill the Gtk client. How do I get rid of the Gtk client in KDE, permanently? BTW, my laptops are running Slackware 13.1 stable with all patches up to now and some additional software from various repositories.

View 10 Replies View Related

Debian :: Can't Get Wireless To Work With Wicd

Nov 20, 2015

I tried to install wicd so I can connect to my wireless internet, but it gives me the following output:

/usr/share/wicd/gtk/gui.py:458: Warning: Source ID 54 was not found when attempting to remove it
gobject.source_remove(self.update_cb)
ERROR:dbus.connection:Exception in handler for D-Bus signal:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 230, in maybe_handle_message
self._handler(*args, **kwargs)
File "/usr/share/wicd/gtk/gui.py", line 253, in handle_connection_results
error(self.window, language[results], block=False)
KeyError: dbus.String(u'bad_pass')

I have checked that the pasword is correct. I had network-manager installed but it has been uninstalled. I am trying to connect to a WPA2PSK router. I might be a firmware problem, since I get a 'message' on the start screen that there are some problems with my firmware, but I can't figure out how to check if it is broken, or how to configure it so it is correct.

I have the qualcomm atheros ar9485 wireless card. As far as I can tell, the driver for that is either ath3k or ath9k, both are installed. The message I get when I start the computer is: usb 1-1.1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2).

View 14 Replies View Related

Debian :: How To Backup Wicd Profiles

Mar 28, 2010

I would like to backup my wicd profiles. I thought it would be sufficent to copy /opt/wicd/data and /opt/wicd/encryption - however, those path do not exist in lenny (which I am running). So which path / folders / files do I need to backup in order to back up the wicd profiles and configuration?

View 1 Replies View Related

Debian :: Wireless Not Appearing In Wicd?

Jun 13, 2010

I recently purchased a laptop from zareason. Seems great, only I've been struggling with getting the wireless to work. I feel like I'm awfully close.

Note: I'm running Lenny.

I downloaded what I thought was the driver for the card. The card info is:

Intel
Model 533AN_MMW
Intel WiFi Link 5300
MAC 00216A72EE22
TA: E50434804

I've successfully install wicd, but it doesn't detect any wireless network. Other computers seem to register the wireless network in my apartment.

View 11 Replies View Related

OpenSUSE :: Replace Knetworkmanager With Wicd?

Sep 10, 2010

Wanted to replace knetworkmanager with wicd due to some intermittent connection problems that we had.

Did a search from opensuse search page and comes up with this

Index of /repositories/X11:/xfce:/nilda/openSUSE_11.3

Understand that this should be safe to use.

why is wicd not in opensuse's own default repository?

Dig a little deeper and found this link

Index of /repositories/system:/wicd/openSUSE_Factory/x86_64

Believe this is opensuse's own repository. But why is is not part of the default repository that is available to all users after install?

Question 3 How can I better understand the opensuse's repository. Are there good site/articles that give clear explanation on opensuse's repository

View 5 Replies View Related

Ubuntu :: How To Start Wicd From Terminal

Jan 13, 2010

I shot the operative system of my son's computer into pieces and the system only boots into terminal mode (Kubuntu 9.04. Anybody knows how to:

1) Start wicd from terminal?
2) Make wicd scan for an available network from terminal?
3) Make wicd connect to a selected network from terminal?

I want to run the command "sudo apt-get update" but the system can't download any files because it is not connected to the internet!

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved