General :: Rt2870/wusb600n V.2 Not Detected By Ubuntu 9.10?
Feb 22, 2010
I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.
View 1 Replies
ADVERTISEMENT
Oct 4, 2009
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Nov 20, 2010
I have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
View 2 Replies
View Related
Jan 12, 2011
I have been installing via wiki instructions and I am stuck installing a USB wireless. Where should I be going with this?
PHP Code:
debianportable:/home/dave# modprobe rt73usb
debianportable:/home/dave# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code]....
View 14 Replies
View Related
Feb 7, 2011
I have been using UBUNTU 9.10 on a toshiba satellite notebook for about 8 months. My first challenge was getting online and staying that way with mobility. I purchased a Cisco Systems Linksys WUSB600N version 2 from the store and brought it home to install on my machine. My first install was successful, to some degree. I followed the instructions that I found here on our forums and was soon on my way.
After a while, though, I started being disappointed with my device's performance. It would frequently drop my connection, and was always reliably slow- even under a good signal. I assume that it can work better, so I proceeded to go back online, and search for a new driver. Herein lies my problem. Instead of searching for ways of optimizing the device performance I opted to install a new driver (which turns out to be the same driver).
I have read threads on installing the driver: [URL] which were very helpful the first time, but in my current position leave me hanging. I have read many pages on many sites trying to avoid posting un-necessarily, but to no avail. I think my problems stem from n00b status, and so I will divulge my symptoms:
1) I did not uninstall the first driver -- don't know if it's a problem, but i'm listing it --
2) I can't fully decipher the README file particularly this part:" 3>In os/linux/config.mk define the GCC and LD of the target machine define the compiler flags CFLAGS modify to meet your need"
# --I have followed steps 1> and 2> successfully, I think.
3) the error I receive when running make in the driver's directory is as follows:
make [1]: Entering directory '/lib/modules/2.6.31-14-generic/build'
make [1]: *** No rule to make target 'modules'. Stop.
make [1]: Leaving directory '/lib/modules/2.6.31-14-generic/build'
make: *** [LINUX] Error 2
I feel like I'm missing something essential in either the 'Makefile' or the 'config.mk' files, but now turn to the help of the community.
View 2 Replies
View Related
Apr 22, 2011
I've compiled and installed my rt2870sta.ko and the firmware to the correct locations but my ubuntu 10.10 is loading the one under
/lib/modules/2.6.38-25-generic/kernel/drivers/staging/rt2870/rt2870sta.ko.
How do I get it to use the correct driver? I've attached a screenshot of the module info.
View 9 Replies
View Related
Jun 28, 2011
I have a Sparklan WUBR-502GN USB dongle with the RT2870 chip. It has worked, (with a little effort) of previous installs of 9.04, 9.10, 10.04 and 10.10. However it refuses to work in 11.04. I followed the same procedures, (blacklisting, confirming device ID, modifying config.mk and rt_linux.h, sudo make & make install and removing staging/rt2870), outlined in past forum articles and that worked in the previous RCs, but the connection to my home network will not complete. Has something changed in 11.04 that is substantially different from past releases?
P.S. the only thing I haven�t done, since 11.04 was only installed moments before, is do the build essential and headers.
View 9 Replies
View Related
Mar 27, 2011
i have a big problem to get my linkysy WUSB600N Wireless N Adapter to work . I have try it with the packages but don't work .
View 1 Replies
View Related
May 13, 2010
I am very new to Ubuntu and if I could get internet I'm sure I would love it as it appears very speedy! I don't want to resort to reloading Windows just because of this!I've managed to install the RT2870.inf driver for my Belkin wireless adaptor but couldn't install the sys file. Hence my adaptor still won't work - well I think this is why but hoping someone can enlighten me step by step.
View 1 Replies
View Related
Mar 6, 2011
Alright yall, I just got my wireless usb device to work on ubuntu 10.10. I did alot of searching and I finally figured it out. this is what I did.
1.Download the linux drivers from this post, its called Ralink_RT3572USB_drv2400.zip
2.Extract them to a directory.
3.Make sure you have build-essential installed on your computer. you can do this by opening a terminal
and typing
Code:
sudo apt-get install build-essential
4.Now install linux headers so that you can compile the drivers.
Code:
sudo apt-get install linux-headers-$(uname -r)
5.Now in your terminal goto where you extracted the Ralink_RT3572USB_drv2400 files.
once in that directory type
[Code]...
View 9 Replies
View Related
Apr 19, 2011
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
View 9 Replies
View Related
May 11, 2010
I've read many threads about the Linksys WUSB600n (both versions), and tried the suggested solutions to no avail in 32-bit Ubuntu 10.04. Compiling my own drivers, adding items to the blacklist, and even a clumsy driver transplant from 32-bit 9.10 have all failed. So here's the sitch: I have a Linksys WUSB600n v1 that works perfectly in 9.10 with only the minor modification posted by chili555 in this thread
HTML Code: [URL] That solution was: "
Code:
sudo gedit /etc/modprobe.d/blacklist.conf
Add three lines:
Code:
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
"
I've tried the same in a clean install of 10.04, but no connection is made and a prompt comes up every few minutes asking for the password. I've used the included rt2870 driver in 9.10 without problems. My wireless-N network uses WPA2 personal encryption, which has never given me issues. The usb id of my adapter, per lsusb, is ID 1737:0071
[Code]...
View 1 Replies
View Related
Sep 3, 2010
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
View 4 Replies
View Related
Feb 3, 2011
i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.
View 1 Replies
View Related
Jan 3, 2010
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies
View Related
Mar 1, 2010
I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make
sudo make install
reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
View 8 Replies
View Related
May 1, 2010
I was wondering if anyone figured out the WUSB600N ver1 with Ubuntu 10.4 yet. It's the chipset rt2870sta which works perfectly on Ubuntu 9.10 after blacklisting the other RT2x modules but following the same steps as I would 9.10 on the new release of Ubuntu won't allow me to connect via wifi at all. I went back to 9.10 for now but was hoping this would be resolved soon.
View 2 Replies
View Related
Jan 3, 2011
I've managed to install my WUSB600N on 10.10 (which was NOT easy!!) and I can see all my local wireless networks, but I can't connect - it attempts to connect then disconnects after what I guess is timing out.I know that you can place these cards in broadcast mode (I think), where you can see networks but not connect. Considering that to get this card working I had to attempt about four different sets of instructions to get this far, could I have placed the card in a broadcast mode? I've been at this for about three days, and unless I go out an buy another network card (I'm currently connected using it through windows) then I'm going to have to give up on Linux, which I really don't want to
View 9 Replies
View Related
Feb 8, 2011
I hate kernel upgrades, at least on my laptop. Every time I upgrade, I have to recompile the driver for my Linksys WUSB600N adapter or it doesn't work. Usually, this is no problem, as I have the driver saved in a .tar file and all I have to do is 'make' and 'make install' and it works. BUT... This time, I tried that, and I get this:
Code:
doug@dh-laptop:~/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2$ make
make -C tools
make[1]: Entering directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools/bin2h
[Code]....
View 3 Replies
View Related
Jul 16, 2011
My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:
Code:
blacklist rt2860sta
blacklist rt2870sta
blacklist rt2x00usb
blacklist rt2500usb
blacklist rt73usb
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
[Code].....
The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.
View 1 Replies
View Related
Jun 26, 2010
I've got a sitecom usb wireless adapter that uses the RT2870 chipset.I have got the rt2870sta module and have a ra0 interfaceI can set up a connection in the network tool and it recognises the usb device fine.
[root@genie devices]# iwconfig
ra0 RT2870 Wireless ESSID:"******" Nickname:"RT2870STA"
Mode:Auto Frequency=2.462 GHz Access Point: Not-Associated
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have no control over it and the wireless bit in Network Manager is greyed out. I got the firmware from the Ralink site
/lib/firmware/rt2870.bin
I have set the country code in the .dat file to 1 for channels 1-13 and selected channel 11 My netgear wg-614 wireless light has no activity.
View 2 Replies
View Related
Nov 16, 2010
I have installed the Fedora 14, and a Dlink usb wireless adapter (DWA-125) with rt2870 chipset, but this one isn't working with my OS.
I typed the lsusb command
Code:
Bus 001 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
I downloaded the drivers from YUM, the rt2870 and also kmod-rt2870. I thing that this step is ok.
I typed the dmesg | grep 2870 command
Code:
[21421.956342] usbcore: registered new interface driver rt2870
When I open the /proc/modules file, it shows the line bellow
rt2870sta 542230 0 - Live 0xffffffffa02fc000
[Code].....
View 1 Replies
View Related
May 1, 2011
i don't have connection in my compuer write now so i whant to install RT2870 driver but i don't know how i found this tutorials [URL] but i can't install may be i have error in choise package this is my kernel version Linux Ouz3r4 2.6.35.10-74.fc14.i686 #1 SMP Thu Dec 23 16:17:40 UTC 2010 i686 i686 i386 GNU/Linux i found this driver too [URL] but how to install
View 1 Replies
View Related
Nov 22, 2009
I have a Ralink rt2870 chip. Since it did not work with 11.2 out of the box (should it not be in the kernel?), I had to install this driver from the software search area on opensuse.org:
After installing it, it works, but only at reduced speed, (I think), because when keeping the mouse over the list item (of that connection) in Network Manager, a window pops up saying I only have 54Mbit/s.
It says:
Type: WiFI
Interface: ra
Hardware adress: 00:15: .....
Driver: usb
Status: connected
Bit rate: 54 Mbit/s
View 1 Replies
View Related
Dec 23, 2010
Having read and attempted several theories on how to resolve this issue to no avail.
Code:
root@bt:~# lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 7 Replies
View Related
May 13, 2010
I tried getting a Belkin USB Wireless adapter:N150 to work in a fresh installation of 10.4 with no success. After reading several forum posts I tried both solutions with ndiswrapper and the XP driver and with the Ralink native driver with no luck.
Code:
lsusb
Bus 005 Device 008: ID 050d:935a Belkin Components
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
View 9 Replies
View Related
Mar 3, 2010
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
View 9 Replies
View Related
Sep 17, 2010
There was quite a bit of threads about this card, and getting it to work mostly boils down to downloading Ralink's propitiatory driver. The card uses RT2870 chipset, and Ubuntu comes with two drivers that are supposed to support it, neither of which seems to work with WUSB600N. One of the drivers included with Ubuntu detects networks operating on 2.4GHz but fails to connect to them, but does not detect 5GHz networks at all.
I was wondering if anybody knows what is so special with this card that it doesn't work with drivers that are shipped with Ubuntu? The card works nicely with Ralink's driver, but it's a bit annoying to have to recompile it on every kernel update (would be much nicer if it worked with stock drivers).
View 3 Replies
View Related
Jan 17, 2011
Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.
View 1 Replies
View Related