I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View Relatedhow to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedMy laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
View 8 Replies View RelatedI have been trying to connect to the internet with a wired LAN connection for a while now with no luck. Running version 8.04 LTS on a 32-bit desktop. Interestingly, my 64-bit desktop running version 8.04 64-bit automatically connected to the internet with no problems or input from me. Both are connected to the same router.
I figured i'd try and copy the network manager settings from the 64-bit machine to the 32-bit machine, which involved setting an automatic configuration (DHCP}. All went well except no DNS server address showed up on the 32-bit system, despite there being one on the 64-bit system. Trying to run Firefox like this results in the 'page load error' page coming up immediately.
I then manually added the DNS server address from the 64-bit system to the 32-bit system, and all that did was prolong the time it takes for the 'page load error' page to appear.
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
Output of dhclient
everything works good in windows environment. still in ubuntu 9.1 which i am using , cannot access internet using connection manager
View 4 Replies View RelatedWhen I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies View RelatedThe situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
I am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies View RelatedI have BIG troubles trying to set up wired internet connection in Ubuntu! To be able to connect to the internet I have to enter my MAC address, 2 IPs, netmask and 2 DNS address. When I try to edit the default internet connection eth0 with my correct information, the minute I enter my MAC address and save the changes the network manager creates new internet connection with wrong data and use it instead! I can't select the correct internet connection from the top bar where the internet icon is, because it is just not there. The only connection that I can choice is the new default one with the wrong data! If I try to create new separate internet connection with my correct data the same thing happens! The moment I enter my MAC address and save it, the internet connection disapears from the list of internet connections in the internet area in the top bar and I can't select it. I tried googling it, but with no luck I think that if I set up my connection trough the terminal everything will be ok
View 2 Replies View RelatedI have had the exact same set up 10.04 on the same machine connecting to the net with no problems. I had upgraded from an earlier version.
This time with a fresh install from disk the network manager does not see any connections. How can I get the manager to recognise the network and connect to the net?
I realise that it would help if I posted up the output of some commands in a terminal but I am writing this on my phone and can not cut and paste large chunks of text. I can only hope for some advice until I can get to a computer with a working connection.
Ubuntu 10.04 AMD dual core 64 bit with wired 10 meg broadband.
How can I get the network manager to see the connection
How can I find the MAC address?
I've installed Ubuntu 10.04 on my classmate's Lapie after he got frustrated with Windows 7
Everything is fine except LAN connection wired one...
Can anyone tell me how to confiure that..& from where ?Like his IP addressis 192.168.68.10 with subnetmask 255.255.255.0
Plz guide me for this...Bcz many of my fellow hostelmates are for Ubuntu if I configure it out.
I have an old Compaq Presario v2000 that recently had Ubuntu 10.04 installed on it. The wired internet worked when it was installed, but the wireless didn't. I tried to download the drivers for it and it failed everytime. I did an update thinking that the update might fix the wireless, but it didn't, it actually made my wired connection stop working. So now I have a newly installed OS on the laptop, and I can't do anything on it because there is no way to get any internet.
View 1 Replies View RelatedI've just installed the 64 bit 10.04 onto my new netbook, with ample specs to run the full desktop version rather than the stripped down netbook version. My only problem (at the moment) is that my wired internet connection is not recognized within the operating system, yet while I was downloading/installing Ubuntu it had no problem finding and using the connection then. When I boot into Windows 7 or plug the ethernet cable into my Mac, the connection is established immediately, and no need for manual entering of anything because everything is auto-detected. The really strange thing is I've run Ubuntu off a USB stick and when booting off that the wired connection was immediately recognized after startup.
View 5 Replies View RelatedI have an ibm think pad and for some reason the internet(firefox) stop working and i don't know why , the netwprl settings have disappeared or anything on fixing it , yes i have tried restarting the modem but that hasn't work ethier Also i don't really know where the re-start disk so is there anyway i can fix it with out the disk?
View 4 Replies View Relatedconnect to my wired connection using the terminal?i screwed myself over and dont have a desktop menu bar,and i need to connectto the internet so i can get it back.
View 4 Replies View RelatedUsing 10.10 and have a wired connection that according to the system is connected, but when I open a browser I can't connect to any sites. What am I missing here? I can't for the life of me figure this out.
View 6 Replies View RelatedI have installed Ubuntu for the first time (version 11.04), finally making the step to open source software. Everything seems to be working fine, however I can't connect to my router via a wired connection.I can use the wireless network,hich was detected and I could connect by giving the code. But when I try to connect to this network by wired network, it tries to connect and it says "connection offline" after a while. It never establishes a connection. I used the standard automatic DHCP settings of eth0. I never got this problem with another OS and it's not the cable that's not working
View 9 Replies View RelatedI installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies View RelatedI've been running ubuntu for about 6 months, so i'm still abit of a newbie at linux but heres what im having issues with:I'm having troubles connecting to the internet on ubuntu, i have no problems connecting on xubuntu on the same machine. I can connect to my network but i cant access the internet on firefox or snaptic or any of that, but the weird thing is i can successfully ping address' in the terminal. I can also connect to my router config page in firefox using 192.168.0.1.
My internet worked perfectly about a month ago on this ubuntu install, so i cant figure out what i did to make it stop working. I think it may have something to do with the/etc/resolv.conf file because it only exists as /etc/resolv.conf.tmp and when i run "sudo dhclient wlan0" (or eth0) it says:
ubuntu@ubuntu:~$ sudo dhclient wlan0
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
[code]....
currently running ubuntu 9.10, the internet connection im hooking up to is a router from a friends personal dish internet (were all deployed to Afghanistan). Here is all the static information that i need to input.now i have all this information input in windows 7 and it works fine since its all broken out exactly how it was given to me in the ipv4 settings page. wicd in ubuntu however wont use these settings.
View 2 Replies View Relatedi recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..
View 2 Replies View RelatedIm trying to connect to the internet through a wired link to a bthomehub. every time i try and connect i get this:
The homehub says its conneted yet ubuntu says its not. im using version 11.04
I'm running Ubuntu 11.4 on my laptop, and I can't connect to the internet with it (neither wired nor wireless). It used to be all fine under 10.10.
View 1 Replies View RelatedFor the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.