Ubuntu :: WUSB600N Dont Work On 10.10?
Mar 27, 2011i have a big problem to get my linkysy WUSB600N Wireless N Adapter to work . I have try it with the packages but don't work .
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: WUSB600n V1 - Won't Work In 10.04 Lucid
May 11, 2010I've read many threads about the Linksys WUSB600n (both versions), and tried the suggested solutions to no avail in 32-bit Ubuntu 10.04. Compiling my own drivers, adding items to the blacklist, and even a clumsy driver transplant from 32-bit 9.10 have all failed. So here's the sitch: I have a Linksys WUSB600n v1 that works perfectly in 9.10 with only the minor modification posted by chili555 in this thread
HTML Code: [URL] That solution was: "
Code:
sudo gedit /etc/modprobe.d/blacklist.conf
Add three lines:
Code:
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
"
I've tried the same in a clean install of 10.04, but no connection is made and a prompt comes up every few minutes asking for the password. I've used the included rt2870 driver in 9.10 without problems. My wireless-N network uses WPA2 personal encryption, which has never given me issues. The usb id of my adapter, per lsusb, is ID 1737:0071
[Code]...
Ubuntu :: Keyboard Dont Work In Terminal-tty?
May 1, 2011True terminal is: ctrl + alt + F1-F6, F7 to exit if you don't know what i mean by using true terminal term. My keyboard work everywhere else.
View 3 Replies View RelatedNetworking :: Configure VPN But It Dont Want To Work?
Jun 18, 2010I try to configure VPN but it dont want to work.
This is scheme:
Code:
10.10.1.90 <--> externalIP1 <--> MY external IP
My /etc/ipsec.conf where I type setkey -f
Code:
cat /etc/ipsec.conf
flush;
spdflush;
[Code]...
Ubuntu Multimedia :: Samsung IPOD YP T10 Dont Work On 9.10?
Feb 13, 2010My samsung ipod yp-T10 works fine on windows but it does not on ubuntu.I have not installed any software to run it on ubuntu except there is Rythmbox and it does nothing when i scan the removable media.Whenever i try to open the music folder of my ipod it gives this error:The folder contents could not be displayed.orry, could not display all the contents of "Music": Failed to get file list: -8: Fixed limit exceeded.
View 9 Replies View RelatedUbuntu Networking :: WINDOWS And WN111v2 Dont Work?
Jun 22, 2010I had a sweet one in windows that came with my WN111v2 that did what i needed. Now that WINDOWS and my WN111v2 dont work i need two things.
1 a good USB adapter that will work with 2. a good wireless utility that is easy to install. I work out of my van and often have time to get online but not if its a pain in the A$$. wardriving, leeching, parasite, whatev you wanna call it. I call it passing my free time at work.
Ubuntu :: File (group) Permission Dont Work As Expected
Feb 4, 2011Well, this is a problem that keeps on coming, and I never found a solution: Maybe it is just me misunderstanding how it should work, but:
1) do you confirm that, as a member of the group "fuse", I should be able to read the file?
2) of course, I could change the permission of the file, or read it as sudo, but sometimes this is not possible. how to achieve it then?
Ubuntu Installation :: User Interface Looks Basic And Multimedia Buttons Dont Work
Aug 12, 2010I updated Lucid yesterday, and when I restarted the user interface was changed to a more simple feeling display. This makes me think I'm stuck in a "basic" mode or something. I attached a screen shot, but to give you an idea ill describe some issues. For one thing the minimize buttons are now on the right. The volume control, which used to appear on the top right of the screen, is gone and my multimedia volume control buttons on my Inspiron 1420 no longer work. Furthermore, the command terminal is now white and the keyboard shortcuts for copy and past don't work.
Immediately after updating I also got an error message at login (which also appears different and gives options on bottom of screen like gnome Failsafe) which said something like "gnome default power management installed incorrectly...". I followed the advice of a forum thread that involved the purge command and that seemed to remedy that message.
Ubuntu Networking :: Broadcom Drivers Dont Work Fully On Lenovo ThinkCentre?
Aug 14, 2010I just bought a brand new Lenovo ThinkCentre A70z (All in One). Today I installed Ubuntu 10.4 32bit version, Here are the problems I encountered.1) Ubuntu didn't recognize my Broadcom Wifi Card by default, all though the drivers are there on the DVD, it seems to be blacklisted.my hardware details are :02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4357] (rev 01)Subsystem: Broadcom Corporation Device [14e4:04da]I managed to activate the drivers.the drivers I am using are :
a) Package : bcmwl-kernel-source
Installed Version : 5.60.48.36+bdcom-0ubuntu3
b) Package : bcmwl-modaliases
[code]....
Ubuntu Networking :: Linksys WUSB600N Rev 1 Should "just Work" With 11.04
May 4, 2011I see a bunch of posts about WUSB600N, often telling folks to download and compile proprietary drivers from ralink's website. With Ubuntu 11.04, getting WUSB600N to work might be as simple as disabling rt2870sta (for rev1). If you have rev 2 card, driver to disable is I believe rt3572sta. Even if you need to recompile drivers by hand, the right thing to do is to first try nightly build of rt2x00 drivers from [URL], and fall back to ralink provided drivers only if things do not work out with rt2x00 drivers. I saw recent updates on rt2x00 mailing list for rt3572 chip, give it a try if you have rev 2 card.
WUSB600N rev 1 (rt2870 chip) should "just work" with rt2x00 driver included with 2.6.38 kernel in Ubuntu 11.04. At least it works for me. You may need to blacklist rt2870sta driver from staging directory so that it does not load and interfere with rt2x00 drivers. There's one small annoying issue with power save mode on rt2870 chip when rt2x00 is in use, which seems to have just been fixed upstream. Most users will never notice it, but if you do notice card re-connecting to AP every 10-20 minutes or so, simply disable power saving, and all will be smooth (iwconfig wlan0 power off). If you have an older Ubuntu release (kernel 2.6.35) and rev 1 card, you should be able to download nightly build of rt2x00 driver from [URL]. It worked for me just fine with previous Ubuntu releases.
Fedora Installation :: Update The New Nvidia Drivers Since Dont Seem To Work In The Newer Kernel?
Jul 7, 2011I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
Ubuntu Multimedia :: Online Video Players - Pause - Play - Buttons Dont Work Unless Click On Multiple Times
Apr 28, 2010When i got to a site such as You Tube of South Park Studios the vidio playes fine but the pause, play , fullscreen ect... Buttons dont work unless it click on them multiple times!
View 3 Replies View RelatedUbuntu :: Grub Dont Work \ Get Message: "no Such Device....., Grub Rescue."?
Jun 23, 2010Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies View RelatedUbuntu Networking :: Linksys WUSB600N Cannot Get Recognized
Sep 3, 2010I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
Hardware :: Ubuntu 10.10 32 Bit Linksys WUSB600N V2 Can't Install?
Feb 3, 2011i'm very new at this and tried to install Linksys WUSB600N v2what i would like to know how uninstall any drivers/ software i may have already put on the os. how can i verifry that the device is functional after installing drivers.
View 1 Replies View RelatedGeneral :: Rt2870/wusb600n V.2 Not Detected By Ubuntu 9.10?
Feb 22, 2010I have a Linksys wusb600n v.2/rt2870 that Ubuntu isn't dececting ndiswrapper is installed and appears to have taken well to the XP drivers but the card itself is still not being detected. I looked at the Linux drivers for it but i have no idea how to install the tar.tar.something file(i cant even find the ralink site anymore).to rest of the process. I even managed to make my way up to the library to get a couple of books but the latest one was written in 2006. I installed root and tryed a few commands but nothing made sence.
View 1 Replies View RelatedUbuntu Networking :: Can't Connect To Wireless Linksys Wusb600n
Jan 3, 2010i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies View RelatedUbuntu Networking :: 9.10 - WUSB600N Ver2 Working In Karmic
Mar 1, 2010I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make
sudo make install
reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
Ubuntu Networking :: WUSB600N Ver1 - Won't Allow To Connect Via Wifi
May 1, 2010I was wondering if anyone figured out the WUSB600N ver1 with Ubuntu 10.4 yet. It's the chipset rt2870sta which works perfectly on Ubuntu 9.10 after blacklisting the other RT2x modules but following the same steps as I would 9.10 on the new release of Ubuntu won't allow me to connect via wifi at all. I went back to 9.10 for now but was hoping this would be resolved soon.
View 2 Replies View RelatedUbuntu Networking :: WUSB600N Unable To Connect Despite Able To See Networks
Jan 3, 2011I've managed to install my WUSB600N on 10.10 (which was NOT easy!!) and I can see all my local wireless networks, but I can't connect - it attempts to connect then disconnects after what I guess is timing out.I know that you can place these cards in broadcast mode (I think), where you can see networks but not connect. Considering that to get this card working I had to attempt about four different sets of instructions to get this far, could I have placed the card in a broadcast mode? I've been at this for about three days, and unless I go out an buy another network card (I'm currently connected using it through windows) then I'm going to have to give up on Linux, which I really don't want to
View 9 Replies View RelatedUbuntu Networking :: WUSB600N Dead After Kernel Upgrade
Feb 8, 2011I hate kernel upgrades, at least on my laptop. Every time I upgrade, I have to recompile the driver for my Linksys WUSB600N adapter or it doesn't work. Usually, this is no problem, as I have the driver saved in a .tar file and all I have to do is 'make' and 'make install' and it works. BUT... This time, I tried that, and I get this:
Code:
doug@dh-laptop:~/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2$ make
make -C tools
make[1]: Entering directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools/bin2h
[Code]....
Ubuntu Networking :: Cannot Connect To Network Using Linksys Wusb600n V2
Jul 16, 2011My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:
Code:
blacklist rt2860sta
blacklist rt2870sta
blacklist rt2x00usb
blacklist rt2500usb
blacklist rt73usb
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
[Code].....
The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.
Ubuntu Networking :: WUSB600N And 9.10 32-bit - Can't Connect To The Internet (unless Use The Wired Connection)
Mar 3, 2010I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
Ubuntu Networking :: Cisco WUSB600N Rev 1 - Does Not Detect 5GHz Networks At All
Sep 17, 2010There was quite a bit of threads about this card, and getting it to work mostly boils down to downloading Ralink's propitiatory driver. The card uses RT2870 chipset, and Ubuntu comes with two drivers that are supposed to support it, neither of which seems to work with WUSB600N. One of the drivers included with Ubuntu detects networks operating on 2.4GHz but fails to connect to them, but does not detect 5GHz networks at all.
I was wondering if anybody knows what is so special with this card that it doesn't work with drivers that are shipped with Ubuntu? The card works nicely with Ralink's driver, but it's a bit annoying to have to recompile it on every kernel update (would be much nicer if it worked with stock drivers).
Ubuntu Networking :: Linksys WUSB600N Connects On Startup And Then Disconnects?
Jan 17, 2011Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.
View 1 Replies View RelatedUbuntu Networking :: Compiled Driver For WUSB600N But It Won't Load On Start-up Or On Inserting
Jan 4, 2011I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -
[Code]....
Fedora Networking :: Rt2870/WUSB600N Not Running On Startup?
Oct 4, 2009my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies View RelatedFedora Hardware :: Linksys WUSB600N Wireless Usb Device 15
May 27, 2011I started a fedora 15 live cd last night, and at the top right corner, i noticed that wireless was not active. Right mouse button on the internet icon showed me that fedoar recognized the usb device as it is,, a Linksys WUSB600N wireless lan.
However, fedora warned me that the firmware was not available, therefore i was not able to configure the WUSB600N. To be specific,, it's the V2 version.
My question is,, does this device work with linux fedora? i assume that i need to install the required firmware in order to use the device.
Fedora :: Compiling - Getting Linksys WUSB600N Working On FC13
Aug 8, 2010FC13 i686. Trying to compile a driver for Linksys WUSB600N Ver. 2 from a Ralink driver.tar.gz. Below is a portion of the output of the compile, I can't put this whole output on this LinuxQuestions Website it is to large.
In file included from /lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/usb.h:21, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/os/rt_linux.h:62, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rtmp_os.h:42, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/include/rt_config.h:72, from /home/jim/Downloads/RT3572/2010_0709_RT3572_Linux_STA_v2.4.0.1/common/crypt_md5.c:28:
/lib/modules/2.6.33.6-147.2.4.fc13.i686/build/include/linux/sched.h: In function "get_mm_hiwater_rss": .....
General :: Broke Rt3572 Driver For Wusb600n V2 While Trying To Make It Better
Feb 7, 2011I have been using UBUNTU 9.10 on a toshiba satellite notebook for about 8 months. My first challenge was getting online and staying that way with mobility. I purchased a Cisco Systems Linksys WUSB600N version 2 from the store and brought it home to install on my machine. My first install was successful, to some degree. I followed the instructions that I found here on our forums and was soon on my way.
After a while, though, I started being disappointed with my device's performance. It would frequently drop my connection, and was always reliably slow- even under a good signal. I assume that it can work better, so I proceeded to go back online, and search for a new driver. Herein lies my problem. Instead of searching for ways of optimizing the device performance I opted to install a new driver (which turns out to be the same driver).
I have read threads on installing the driver: [URL] which were very helpful the first time, but in my current position leave me hanging. I have read many pages on many sites trying to avoid posting un-necessarily, but to no avail. I think my problems stem from n00b status, and so I will divulge my symptoms:
1) I did not uninstall the first driver -- don't know if it's a problem, but i'm listing it --
2) I can't fully decipher the README file particularly this part:" 3>In os/linux/config.mk define the GCC and LD of the target machine define the compiler flags CFLAGS modify to meet your need"
# --I have followed steps 1> and 2> successfully, I think.
3) the error I receive when running make in the driver's directory is as follows:
make [1]: Entering directory '/lib/modules/2.6.31-14-generic/build'
make [1]: *** No rule to make target 'modules'. Stop.
make [1]: Leaving directory '/lib/modules/2.6.31-14-generic/build'
make: *** [LINUX] Error 2
I feel like I'm missing something essential in either the 'Makefile' or the 'config.mk' files, but now turn to the help of the community.