Ubuntu Networking :: WUSB600N Dead After Kernel Upgrade
Feb 8, 2011
I hate kernel upgrades, at least on my laptop. Every time I upgrade, I have to recompile the driver for my Linksys WUSB600N adapter or it doesn't work. Usually, this is no problem, as I have the driver saved in a .tar file and all I have to do is 'make' and 'make install' and it works. BUT... This time, I tried that, and I get this:
Code:
doug@dh-laptop:~/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2$ make
make -C tools
make[1]: Entering directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools'
/home/doug/LOCAL/Software/RT3572_Linux_STA_v2.4.0.2/tools/bin2h
[Code]....
View 3 Replies
ADVERTISEMENT
Nov 28, 2014
I'm using debian testing with cinnamon. After upgrading the kernel to version 3.17.2 (but I've also tried the 3.17.3 and 4) the synaptics touchpad died, as if it doesn't exist. I can't go back to the old kernel because the new one has solved a problem about freeze during the shutdown process, so I need it. Note that even with Mint 17, after upgrading the kernel, the touchpad stopped working in the same way.I believe that the touchpad is not seen , rather than loaded .xserver-xorg-input-synaptics and multitouch are installed.$ synclient
Code: Select allCouldn't find synaptics properties. No synaptics driver loaded?
$ xinput list
Code: Select all⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SIGMACHIP USB Keyboard id=11 [slave pointer (2)]
⎜ ↳ MLK Trust Mouse 15313 id=12 [slave pointer (2)]
[CODE]...
...no signs of life from the terminal, it immediately waits for the next command.
View 2 Replies
View Related
Mar 27, 2011
I had 10.04 working 100%, than upgraded to 10.10 and now my nic does not work but my wireless does?
My nic is a Marvell Yukon 88E8042 pci-E fast.
ps: this is only on DHCP, haven't tried Static yet
View 1 Replies
View Related
May 11, 2010
I've read many threads about the Linksys WUSB600n (both versions), and tried the suggested solutions to no avail in 32-bit Ubuntu 10.04. Compiling my own drivers, adding items to the blacklist, and even a clumsy driver transplant from 32-bit 9.10 have all failed. So here's the sitch: I have a Linksys WUSB600n v1 that works perfectly in 9.10 with only the minor modification posted by chili555 in this thread
HTML Code: [URL] That solution was: "
Code:
sudo gedit /etc/modprobe.d/blacklist.conf
Add three lines:
Code:
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
"
I've tried the same in a clean install of 10.04, but no connection is made and a prompt comes up every few minutes asking for the password. I've used the included rt2870 driver in 9.10 without problems. My wireless-N network uses WPA2 personal encryption, which has never given me issues. The usb id of my adapter, per lsusb, is ID 1737:0071
[Code]...
View 1 Replies
View Related
Sep 3, 2010
I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
View 4 Replies
View Related
Jan 8, 2010
Did an upgrade today from 9.04 to 9.10. As far as I can tell, everything is working, with the exception of Firefox 3.5.6 with new install. I've attempted an uninstall and install. Tried the following with 3.5.6:URL...I finally found that if I use sudo (or gksudo) I can run firefox at the command prompt. Any other time I run it, it just shows an icon on the lower bar and then it disappears, but within the system monitor it shows Firefox and will show as many as you run the icon with.
I've deleted the entire .mozilla directory, and manually removed all the firefox info fro /usr/bin also before a reinstall. I assume it is either a strange permission issue or some link related issue."which firefox" shows:/usr/bin/firefox and the 3.5.6 files are located /usr/lib/firefox-3.5.6 . Any help would be great, I'm at a loss at this point. I'm sure it's something simple, but it's a royal PITA.I have nxserver on the machine, if that means anything and there was a session locally as well as one remote during the upgrade (using the same account).
View 5 Replies
View Related
Jan 16, 2010
I upgraded from Virtual-Box 3.0 to Virtual-Box 3.1 and now, the sound in my system is dead. I turned up the volume in my Ubuntu 9.04 and tried playing something from [URL], but no sound. I tried the same thing on my Virtual-Box 3.1 that runs WinXP, no such luck.
View 1 Replies
View Related
May 1, 2010
Perfectly working 9.10 just upgrade to 10.04, and now CUPS won't play ball. Any time I try to add a printer with the inbuilt Printer admin utility I get the message:
There was an error during the CUPS operation: 'server-error-internal-error'
If I try and add the printer using http://localhost:631 - any operation gives me:
631 - Request Entity Too Large
My previously installed printer has been removed automagically. Boo. So far I have:
aptitude purge cups
aptitude install cups
Which has made absolutely no difference.
View 1 Replies
View Related
Jan 3, 2010
i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies
View Related
Mar 1, 2010
I have a WUSB600N v2 and it is working great for me. Here is all you have to do. Go here and download the RT3572USB driver [URL] The file you download is called 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2 expand it with the command "tar xjf 2009_1222_RT3572_LinuxSTA_V2[1].3.0.0.tar.bz2"
open the file os/linux/config.mk and edit the following lines: Change HAS_WPA_SUPPLICANT=n to HAS_WPA_SUPPLICANT=y and Change HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n to HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y
Next edit the file common/rtusb_dev_id.c and add the USB ID of the card to it. {USB_DEVICE(0x1737,0x0079)}, /* WUSB600Nv2 */
sudo make
sudo make install
reboot and your done.
If you have added the USB device to any other drivers following other threads you will want to either remove that line and recompile those drivers OR black list those drivers. After doing the above this NIC is working great for me in Ubuntu 9.10 and getting N speeds.
View 8 Replies
View Related
May 1, 2010
I was wondering if anyone figured out the WUSB600N ver1 with Ubuntu 10.4 yet. It's the chipset rt2870sta which works perfectly on Ubuntu 9.10 after blacklisting the other RT2x modules but following the same steps as I would 9.10 on the new release of Ubuntu won't allow me to connect via wifi at all. I went back to 9.10 for now but was hoping this would be resolved soon.
View 2 Replies
View Related
Jan 3, 2011
I've managed to install my WUSB600N on 10.10 (which was NOT easy!!) and I can see all my local wireless networks, but I can't connect - it attempts to connect then disconnects after what I guess is timing out.I know that you can place these cards in broadcast mode (I think), where you can see networks but not connect. Considering that to get this card working I had to attempt about four different sets of instructions to get this far, could I have placed the card in a broadcast mode? I've been at this for about three days, and unless I go out an buy another network card (I'm currently connected using it through windows) then I'm going to have to give up on Linux, which I really don't want to
View 9 Replies
View Related
Jul 16, 2011
My OS is Linux Xubuntu 11.04 (32 bits) and I'm trying to get Linksys Wusb600n network adapter to work. I followed this post and did all that was written in it... almost. When i came to blacklisting, I blacklisted all drivers that starts with rtx (where x is any digit). Here are lines that I pasted in blacklist.conf:
Code:
blacklist rt2860sta
blacklist rt2870sta
blacklist rt2x00usb
blacklist rt2500usb
blacklist rt73usb
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
[Code].....
The problem: I do see all available networks. So I guess... it somehow works. Anyway, problem is that it does not connect successfully to my network. I click on it - it asks my password. I enter it and click 'Connect'. Nothing, except that network icon is started to like spin around (trying to connect, I guess), happens. After few minutes, it asks for password.... again. I enter it and all starts from the beginning. Its like a loop! Note: I don't have any other things installed except linux-firmware-nonfree_1.9_all.deb and, don't know how successfully, but RT3572USB 2.5.0.0.
View 1 Replies
View Related
Mar 10, 2011
I installed Xubuntu 10.10, fresh i don't configure or installed another program, i only installed nvidia drivers (I have a Geforce 9600 GT video card). The entire operating system, and xfce 4.6 was working fine. After, I make an upgrade to xfce 4.8, and when i loged on, everything loaded ok: xfce 4.8 version is working fine, the panels loaded and i can add items.
But there is a problem: My wallpaper image doesn't appear on desktop (only brown solid color), it doesn't show icons, i can't change wallaper in configuration panel (i can add an image but it does not appear in desktop), when I plug in a pendrive usb icon does no appear. And when I right click on the deadspace on the background the right click menu does not come up.
When i open desktop folder in thunar there is information, but icon files does not appear in desktop I thing that maybe is a setting that i can solve typing something in terminal, but i don't know what, i searched in google and in this forum and i found only one post but not related to xfce 4.8 and it was not useful[URL]...
View 4 Replies
View Related
Feb 8, 2010
I am trying to run Ubuntu 9.10 from a USB drive on an old laptop with a dead hard disk.An added complication is that it does not support USB boot, only CD boot.So with the help of URL..., I am running grub from a cd and then booting the kernel from the USB (or something like that).
The problem is that after I do this, I get about 6 minutes of error messages as the kernel tries unsuccessfully to read my dead hard disk ("buffer I/O error on /dev/fd0" or something like that). I can post again if the specific error message would be useful. (But it takes so long to reboot that i'd rather not). I can tell it is trying to access my hard disk as I hear the disk occasionally spinning (it intermittently spins and does not spin). After many failures, the system successfully boots and runs from the USB drive.I tried removing the hard disk from the machine entirely, but this triggers an ASPI error and the kernel hangs.So ideally I would like to modify the kernel command line above to instruct it to ignore the hard disk. I read some kernel documentation but it proved a little bit too advanced for me.
View 4 Replies
View Related
Jul 6, 2011
After the unsolved problems i had with the 2.6.39 kernel update a few weeks ago, reported here, now, I've installed the updates released today, and now, on the old Kernel, my X SERVER is dead..The boot on the new kernel is still completely dead.The boot with the old kernel goes directly do command line..
View 13 Replies
View Related
Mar 3, 2010
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
View 9 Replies
View Related
Sep 17, 2010
There was quite a bit of threads about this card, and getting it to work mostly boils down to downloading Ralink's propitiatory driver. The card uses RT2870 chipset, and Ubuntu comes with two drivers that are supposed to support it, neither of which seems to work with WUSB600N. One of the drivers included with Ubuntu detects networks operating on 2.4GHz but fails to connect to them, but does not detect 5GHz networks at all.
I was wondering if anybody knows what is so special with this card that it doesn't work with drivers that are shipped with Ubuntu? The card works nicely with Ralink's driver, but it's a bit annoying to have to recompile it on every kernel update (would be much nicer if it worked with stock drivers).
View 3 Replies
View Related
Jan 17, 2011
Im having another problem with my wireless in Maverick, Im at my wits end with this thing and dont know what to do next. I followed Dev0's from this thread.And now when ever I start my computer I get a notification that says "Linksys C" connected. Then only a few seconds later it says Disconnected and then from then on every few minutes the Password prompt pops up and then I enter my password and then it just keeps going in that cycle until I click cancel.
View 1 Replies
View Related
Jan 4, 2011
I managed to find an older version of the rt3572 driver to compile to get this dongle to work fine, and it did. After that I added "module rt3572sta" (or whatever it is, not on Ubuntu to check now) to the end of /etc/modules. However, when I boot up Ubuntu, most of the time the driver won't load. If I run 'modprobe rt3572sta' from the terminal, I get this message -
[Code]....
View 6 Replies
View Related
Oct 4, 2009
my wireless adapter(WUSB600N) doesn't run when I log in. The driver is loaded on start-up but the green light is not on the adapter. I have to physically disconnect the adapter and plug it back in to get it recognised and it works fine afterwards
View 2 Replies
View Related
Nov 11, 2010
well I am a novice in Linux OS, I have a wireless card, it's a Linksys WUSB600N but it doesn't work in Ubuntu 10.10 Desktop Edition, which it is the one I have, 64 bits machine, so I read this [URL] and I did all the steps, I downloaded 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar but in the last part, sudo make install I got this error
alain@alain:~/t/2010_0915_RT3572_Linux_STA_v2.4.0.2$ sudo make install
make -C /home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
[Code],,,,
so i have no way to get connected to the internet, what is that error cannot stat `rt3572sta.ko': No such file or directory, I think thats why i can make the wireless card work.
View 7 Replies
View Related
Jun 8, 2009
I have a dell inspiron 530 desktop with core 2 quad and 4GB memory, running 32bit vista and 64 bit fedora 10. I searched on the web with "can I install 8GB memory on dell inspiron 530", and got couple of articles that says I only needed a bios upgrade.I downloaded bios version 1.0.18 from dell and run that in Windows to replace bios 1.0.12.After it said upgrade successful and asked me whether I wanted to reboot to have the new bios taking effect, and I said yes. And it shutdown the computer, and never came up Now, when power up, I see nothing, not even the "F2 to setup, F12 to boot menu" message, much less the grub selection. Is there a way to revive the computer?
View 4 Replies
View Related
Nov 20, 2010
I have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
View 2 Replies
View Related
Feb 8, 2011
My Dell Latitude D820 had lenny installed and working fine. I did not have anything exotic installed (other than perhaps nividia drivers). I went about upgrading to squeeze following the notes/documentation on the debian web site. During this process it mentioned that the following firmware was not going to be installed (as it is not freeware; BTW I had non-free in my sources.list):
tigon/tg3_tso5.bin
tigon/tg3_tso.bin
tigon/tg3.bin
On reboot it was clear that the new kernel was not in a healthy state. Even when booting with older kernels I had serious stability issues. After about half a dozen reboots trying to resolve problems I was experiencing the laptop would not even load the Dell splash screen on power up. I could not even navigate into the BIOS. Nothing appeared on the monitor (or external monitor).
I put an ISO disk in the DVD drive to see if it would boot from the DVD; it seems to load but absolutely nothing appeared on the screen. I tried navigating the grub menu (not displayed) and load my windows partition. When it booted to the point where windows would normally display the GUI it flashed several times and displayed a 'BSOD' with the following message:
*** Hardware Malfunction.
Call your hardware vendor for support
NMI: Parity Check / Memory Parity Error
*** The system has halted ***
It looks like my laptop is now FUBAR. It is out of warranty so any fix is likely to be DIY. Any ideas on how to resolve this?
View 1 Replies
View Related
Jan 20, 2010
I am writing this using the 2.6.31-17 generic kernel after rebooting and selecting NOT to use the 2.6.31-18 kernel which was just installed. The newer kernel would not recognize/activate my Atheros AR2418 wireless adapter and, when I connected to the ethernet and did updates, there were no hardware drivers available. I haven't needed proprietary drivers since I upgraded to 9.04 and 9.10 works fine with older kernel.
View 1 Replies
View Related
Jul 27, 2010
I have just built a PC based around an i7-860 and Asus P7P55D mobo. It was running fine until the big update that happened today and now the internet is like treacle. I did the same update to my other (different hardware) PC and all is fine with it.
When I load the earlier 2.6.32-21 kernel instead of 2.6.32-24, the new system works as it should and the Internet is very fast. This suggests to me that the kernel update is the problem, most likely the NIC driver. This motherboard has a Realtek 8112L NIC fitted.
Has anyone else had this issue and what is the best way around it other than loading the older kernel and hoping that the next update will fix it?
View 3 Replies
View Related
Sep 16, 2010
after upgrading to kernel 2.6.34.6 I have two issues which I don't know how to solve. First and more important is an issue with boot process. The boot is ok until it is supposed to switch to gnome desktop. Then suddenly the graphics become a weird line pattern with no discernible features. Only a rectangle which moves upon moving the mouse. This can be resolved by switching to a console, logging in there and killing the gnome-session. (with kill -9) Then, instantly the desktop appears as usual, the background is loaded, the panels come up and all seems well.
I have no clue what causes this. I thought there's a display driver problem but since I can actually get back to the normal graphics state I'm confused. Also glxinfo says:
Code:
[Me@Plato ~]$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI R600 (RV620 95C4) 20090101 TCL DRI2
Secondly the nm-applet doesn't work until restartet. Normally I expect to see an authorization request window, prompting for my passwd to start wireless networking, and the little icon in the panel. Both don't show up until I kill the nm-applet process and restart it. After I do this everything is back to normal and working as expected.
I assume if problem one is solved, two won't be a problem anymore because I expect the password dialog hidden somewhere in the background when the graphics is all garbled..
Edit: Failed to mention thath my graphics card is ATI3470 as shown in the signature...
View 5 Replies
View Related
Feb 10, 2010
I recently upgraded the kernel in 9.10 to fix a problem of no sound on my laptop but this killed wireless However I could still boot into the previous kernel to use wireless (albeit without sound). I found a fix for this problem on the forums: [URL]... but It didn't work so well in my case. Specifically after executing the command
[Code]...
If anyone knows how to undo the rmmod dell_laptop command or has some insight into what I might be able to do let me know
View 9 Replies
View Related
Jun 8, 2011
I upgraded from kernel-2.6.38.6-27.fc15.x86_64 to kernel-2.6.38.7-30.fc15.x86_64. After the upgrade I no longer have a wireless interface in Network Management. I have a broadcom BCM4312, booting the previous kernel solves this problem.
View 9 Replies
View Related
