Previously i use Ubuntu 10.10 , After installing BackTrack to hard disk, how do i configure a PPPoE / ADSL connection with username and password. i don't know where to find any config. application. In ubuntu i have network connections on taskbar so that i configured easily, but in Backtrack how to do that ?
View 1 RepliesI have trouble connecting to internet when connecting using pppoe-start, even though it says it's connected and the pppoe interface is there. I test the connection by sending a ping to a known IP address and got "destination unreachable".
View 2 Replies View Relatedwhat is the best working software which could backup dual system.Host system is XP pro...and Backtrack on the second one.Is Acronis(xp based) will works?
View 4 Replies View RelatedYesterday I bought a netbook and a wifi router (TP-Link), I connected the ADSL modem to the router, then the router (output) to the ehternet in the desktop with U 9.10. I configured the router to dial the modem.
The router dials the modem, the modem connects, and I have wifi at home, the netbook (still with W7) connects to the wifi network. So far so good.
BUT now the Ubuntu in the desktop doesn't connect. No netwok. If I run sudo pppoeconf, after a scanning process it says that probably there's another pppoe proccess that is controlling the modem. I guess it tries to dial.
Later, when I install U 10.10 in the notebook I'll have to struggle with the wifi network..
I have been dist hunting ever since I bought my new desktop in Sept 08. some live cd or even install cd work or don't-- but I have learned some workarounds i.e. pci=nomsi at boot for example. Problem I have now is I have wired DSL (modem only) and need to manually connect. I can install tkpppoe running ./go-gui command but everytime I do I can send out packets but not ever recieving (correct me if I have this backwards). in other words activity is showing upload but not on downloads and can't ping either ip or domain or browse. been trying to find out what's going on I think it may have to do with the eth0 should not pull up an IP at boot which seems to be 192.147.x.x or like that according to ifconfig -a Otherwords, when I covert my modem to a router every is fine but manually connecting with PPPoE software that's another story. I would go with the router mode but the Westell model I currently have sucks with it's firewall. I usually go with a software based firewall. call me old skool lol. Need some advice.. I miss my journey with linux Even though I have Vista Premium solid as a rock--- I miss the special customizations only nix can provide and better security.
View 1 Replies View RelatedI'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 5 Replies View RelatedI'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 7 Replies View Relatedi'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedI finally managed to install pppoe and pppoeconf. When I type command 'pppoeconf' , it invokes some window and I put username, passwd etc. But my net connection won't start. I have posting the output of various commands related to networking.ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:0f:b0:4a:54:a7
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fe4a:54a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1388 errors:0 dropped:0 overruns:0 frame:0
[Code]...
PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies View RelatedI use d-link to share network with my other PCs.PC is connected to D-link via Ethernet and I can't understand what should be written in /etc/network/interfaces to have Internet.I tried to add option "auto eth0" to /etc/network/interfaces butshould I alsough include? Or how can I reconfigure it manually.
View 1 Replies View Relatedhow to setup PPPoE on ubuntu or even fedora which requires only username and pass to login.
as for pppoeconf.. it gives me error some modconf not found.
I currently have 10.04 installed and would like to update it after getting the internet working .
I won't be able to connect to internet in ubuntu so don't tell me methods which will require me to access internet IN ubuntu. If some downloading from windows is required it's good.
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
I am trying to configure a computer to make it as DHCP server.Well, my current connection is PPPOE.So, I should assign one interface to connect as PPPOE, and the other will be broadcast DHCP server.What configuration shall I apply to the dhcp.conf file?
View 3 Replies View RelatedI was able to connect to internet using PPPoE until I configured Samba network and set the machine as its server; does this two related? Is it possible there's a conflicting configuration, say DNS server config for example?
View 2 Replies View Relatedi want to create the wireless pppoe wireless network but it just dont show any help for pppoe connections.i tried with network manager but it works only for eth0 (not for ethl)
View 3 Replies View RelatedCurrently I use openSUSE but the 6 months release cycle is starting to bug me a bit so yesterday I have tried Debian Testing daily snapshot created on 20-11-2010, using KDE desktop (I am a KDE fun). All goes well until I try to make a pppoe using KDE's module network manager.
I created the pppoe connection with user and password but I got 2 problems:
- After I have created the connection it doesn't appear along with "Auto eth0" above the button manage connections.
- The pppoe connection is not established (both password and username are correct).
I know that I could use pppoeconf or ceni for that matter, but I am new to debian as I where new to openSUSE 4 years ago and I am still learning, so please don't tell to use them I just want to know if there's a way to use network manager from kde 4.4.5 to establish a pppoe connection (you could name it the GUI way, no worries I like using the console as well). Under openSUSE I have a program called qinternet that helps me with pppoe connection is there something similar under Debian?
I need a linux distro who provides the following:1) Has an partitioner who can resize fat , ntfs ,ext* , .....filesystems.2) Has an excellent hardware support3) The installer can install console or graphic mode 4) The updating can be done via console5) In console can be configured internet via: static IP , DHCP , PPPOE and preferably to have support for USB modems.
View 8 Replies View RelatedI use win7 bit and input the ISP username and password, it runs well,but after I swap system to Ubuntu 11.04 64bit, I cant use the username and password to run DSL successfully.I use the
PHP Code:
sudo pppoeconf
A text-based menu program will guide you through the next steps, which are:
Confirm that your Ethernet card is detected.
Enter your username (provided by your ISP).
Enter your password (provided by your ISP).
If you already have a PPPoE Connection configured, you will be asked if it may be modified.Popular options: you are asked if you want the 'noauth' and 'defaultroute' options and to remove 'nodetach' - choose "Yes".[code]................
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I installed openSUSE a couple of weeks ago but didn't use it until 2 days ago. It was the latest version when I installed it.To my surprise there wasn't a gcc or pppoe installed. Or at least there wasn't a command line begging with ppp.I tried to install them both with rpms. I think I got them both, just they don't work very well. In particular rp-pppoe doesn't work at all. It says that there's no modem on eth0, which is very true there's only a eth cable. gcc seems to work but I'm not sure I installed all the dependencies.I can't use yast because of lack of internet. I have to reboot to windows and download rpms.Can you give me a work around? At least for the pppoe then it might fix itself. Can I have some EXACT links to rpms or another solution?
View 4 Replies View RelatedI am a newbie to Linux just installed Ubuntu 9.10 using WUBI. I am not able to connect to Internet using PPPoe. I went thru some of the threads and tried PPPoeconf and it works. So how to configure Network Manager so that it works.
View 1 Replies View RelatedI have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies View RelatedThe Ubuntu version I want to install is Server 10.04 LTS 64-bit. My new machine does not have a CD-ROM drive, so I had to install Ubuntu via USB flash drive.
After following Ubuntu official website instruction and use "Universal USB Installer" to "burn" iso images into USB drive, I could boot Ubuntu via USB smoothly.
However, after going to the installation menu, hitting ESC key twice to enter the command prompt screen, then typing "install modules=ppp-udeb" and going through the installation process, the installer just didn't try to probe my pppoe connection and there is nowhere to set pppoe config. Also my NIC cable had already connected to the pppoe device.
i configured net and LAN setting for it but i cannot make them work together using pppoe....how do i dailup both together and work properly..!!
in windows xp i use to untick use default gateway to make them work simultaneuosly but there is no option like that in ubuntu..!!
I just decided to try out Debian live cd having been on Ubuntu 8.04 for so long. My internet connection is through router and modem/dsl pppoe. Problem... pppoe package isn't in synaptec so I cant use pppoeconf. HoW to get on internet please? Tried both static and DHCP ip.
View 4 Replies View RelatedI got a new ISP, and it uses PPPoE. Let's say it's over eth1. After I connect there is a ppp0 -or similar interface. My question is what kind of firewall policy should I use on eth1? (block all, allow ppoe passthrough only or should I just do nothing?)
View 2 Replies View RelatedI'm using Ubuntu 9.04 ..
My adsl modem is in bridge mode . I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and i can use it .. Now , the Problem :
How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings . But , after that , the access point stopped appearing in "aps in range" in network manager and i can't connect to it . pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network .
SO , HOW CAN I CONNECT TO INTERNET WITH MODEM IN BRIDGE MODE AND CONNECTING VIA THE WIRELESS INTERFACE OF THE MODEM ??
sidenote : hey , is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite ?
I have an internet connection with dial up created with pppconfig that I use Code: #pon connection_name to connect to internet in my ubuntu 10.10 platform and it creates me a connection over ppp0. I want to use a PPTP vpn, so I used this command
[Code].....