what is the best working software which could backup dual system.Host system is XP pro...and Backtrack on the second one.Is Acronis(xp based) will works?
View 4 RepliesI dual boot windows and ubuntu on a particular machine and I'm looking for a comprehensive backup solution. Basically I'm after a single tool to clone the entire drive and do incremental backups with little to no concern for the underlying os.
My first instinct is to set up rsync to do the back up from ubuntu and just mount the windows partition when it does its thing so it backs that up too. Does that sound reasonable or am I missing something? At face value this seems like a reasonable answer, but I can't help but feel like something is "off" with that approach.
I'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies View RelatedI have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies View RelatedI just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
View 14 Replies View Relatedi have installed virtualbox on centos , and installed xp as a guest os. my LAN is on 10.200.2.x/24 network inorder to avoid conflict i have given centos ip as 10.200.2.191/24 and a virtual ip 192.168.56.4/24 my gateway is 10.200.2.1 i am able to ping from my guest os to host os the ip address but not the gateway inorder for internet connectivity
some of the configuration of virtual box
Display
Video Memory:
16 MB
3D Acceleration:
[Code]....
I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies View RelatedI have a dual boot set with XP Pro and 11.2 Is there a way to boot the already installed XP Pro as a guest in VBox? There are many occasions when I would like to jump into XP from 11.2 with the VM. Searches can't seem to find any link to this specifically but this may just be me and the terminology involved.
Found info on mounting an image here but not sure this is what I want.
HOWTO: Mount any VBox-compatible disk image on the host (View topic) - virtualbox.org
With VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?
View 1 Replies View RelatedI have a Ubuntu hosting a Windows XP box (using VirtualBox). The Windows XP box is connected to work using Check Point VPN-1. Essentially this enables me to go to my Windows box and do something like ping comp-at-work and it just works.
I would like to access the VPN resources from the Linux host though. The Windows guest is only there because the VPN client isn't working in Linux. If I could somehow ssh from the Linux host right into my computer at work (using remote desktop would also be great), that would save me a lot of round trips between my Linux host and the Windows guest.
My RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
View 2 Replies View RelatedI am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
I've for quite a while been going forward with making my own linux system with a purpose of being USB bootable. A lot of it has been taken from LFS and molded to my needs. The purpose of this is to, most of all, learn. My aim is to have a small linux system, bootable on most systems and able to run burnintest in textmode. This will be run of a vfat formatted pen drive with syslinux. The rootfs is run from a ext2 image file. My current image is bootable and is able to run burnintest, I do however still have some polishing to do.
I began this project by using uClibc and my image would be tiny enough to be run from a single initrd (20mb ~). What I didn't consider is the fact that burnintest is pre compiled using glibc, so had to re-do everything with a different c library.. After doing this I realized i no longer would be able to boot simply from ram as loading ~80mb to ram takes quite a lot of time during boot. I'd really like to keep the rootfs in an image file for easier management and I so far haven't found a way to mount this roofs image.
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedCould you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
Previously i use Ubuntu 10.10 , After installing BackTrack to hard disk, how do i configure a PPPoE / ADSL connection with username and password. i don't know where to find any config. application. In ubuntu i have network connections on taskbar so that i configured easily, but in Backtrack how to do that ?
View 1 Replies View RelatedThe problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies View RelatedI am dual booting windows and ubuntu. I bought a external hard drive to use as a backup solution. I like the idea of my external HD being an exact copy of my internal one so that if my internal one completely fails I can just plug my external one in and carry on (it's an internal drive in an enclosure).
I notice a lot of people use rsync to backup their home directory. Can I use rsync (or something else) to back up the whole drive including the Windows partition.
can any one tell me how i can make my system dual boot ie how can i install Linux with XP on my system.
View 5 Replies View RelatedI have purchased a 500Gb seagate external hard disk.I partitioned it using the xp disk manager. I have now 320gb primary NTFS partition for accessing & storing data through XP & kept 144Gb of unallocated space for installation of Redhat Enterprise Linux 6.0. I have the dvd of RHEL 6.0, now please guide me through the process. I know I have to boot from my dvd drive. But i don't know how to manually allocate & partition the swap, and how much to mount under '/' & under'/boot'.. And also how to set it up for the dual boot.
View 5 Replies View RelatedI've been running Fedora 10 since it came out (I'm doing some numerical modeling for my thesis), but I've got some questions about a new box I'm going to build. I am going to build a new 64bit machine, dual boot with Win7 and Poseidon Linux (waiting for the 64bit version to come out later this year).is there an advantage to having each OS reside on a different physical HDD? meaning - 1 hard drive for Win and 1 hard drive for Linux and just decide which HDD to boot when I turn the machine on. -or is it better to have them reside on the same HDD and just have a separate HDD for data / storage? -is there a good resource to describe some optimal architecture's? I've searched through the forums and haven't found anything that concise / on-target / similar. As additional info: this box will be my livelihood, so right now, money is not really an object in terms of HDDs, etc.
View 3 Replies View RelatedI hope this is posted in the right forumI have a dual boot ubuntu 10-4 and windows vista each on a separate 500 GB drive.nt to install Windows 7 in place of vista but I understand that there are some issues with grub 2 if vista and linux are already installed.Also can it be done from within Vista as an upgrade without doing a complete reinstall.I also wondered if installing windows 7 as a virtual box would be a better option.only have a few programs that I need to run in windows but I do use them regularly.
View 5 Replies View RelatedI have decided to remove Windows from my disk, but I want to keep my current install of Ubuntu.
One possibility that sprang to mind was to make an image out of my Ubuntu install.
Since I dual boot, the disk is numbered "SDA2" (extended) "SDA5" (root) and then there is Swap. (Windows is the first part of the disk)
One question sprang to mind:
If I make an image out of it, what happens to the numbers? Will there be any conflicts? Not to mention the question of which program would be best (and easiest to use, preferably with a GUI, since I want to save time, not learn code).
And if I would go for a binary dump to an external disk (to put it back when the destination disk is empty), would the same problems arise? Or would that bring even more problems, like the issue of the swap partition, which I would have to receate, since it wouldn't fit on the "dump disk"?
This is all because the whole thing sounds very similar to placing the ubuntu partition to the front of the disk, which, as I have been told, is not a good idea.
I am new Linux, but have already installed a new HDD in my PC and successfully installed Fedora 14. Unfortunately, I am unable to configure my system for dual boot and my PC always boots right up into Windows Vista which is the original OS on my original HDD. I have searched the web, but only find examples of splitting partitions and dual booting into different versions of Windows. I apologize for the simple question, but I am certain that someone in here can point me in the right direction. My intention is to migrate to Linux entirely, but want to learn Linux before completing a full migration.
View 4 Replies View RelatedOn my Ubuntu 10.04.1, the ethernet doesn't work for my dual boot (Windows Vista) machine. I can run Ubuntu 10.04.2 from a USB flash drive & would like to install it over the non working 10.04.1.
My Ubuntu is on my dev/sda6 partition (I think the swap is on sda7) but when I try to install on that partition I get a question about the root.
How do I install Ubuntu on that partition without messing up my Vista. (I did it wrong on my netbook & had to rebuild the whole computer). I think I can delete partitions, expand vista to take all the free space & then reinstall Ubuntu "side by side" but that seems like the hard way.
I don't know how to select the correct options to reinstall Ubuntu without changing the partitions.
I had dual boot system with XP as the primary partition. XP became corrupted and I reformatted and made a clean install of this partition which has removed the grub loader for Ub on second partition. Is there any way to get back to Ubuntu without deleting this partition and reloading it from my live disc?
View 2 Replies View Related