OpenSUSE :: New Install, Pppoe And Gcc Missing?
Mar 12, 2010
I installed openSUSE a couple of weeks ago but didn't use it until 2 days ago. It was the latest version when I installed it.To my surprise there wasn't a gcc or pppoe installed. Or at least there wasn't a command line begging with ppp.I tried to install them both with rpms. I think I got them both, just they don't work very well. In particular rp-pppoe doesn't work at all. It says that there's no modem on eth0, which is very true there's only a eth cable. gcc seems to work but I'm not sure I installed all the dependencies.I can't use yast because of lack of internet. I have to reboot to windows and download rpms.Can you give me a work around? At least for the pppoe then it might fix itself. Can I have some EXACT links to rpms or another solution?
View 4 Replies
ADVERTISEMENT
May 22, 2011
The Ubuntu version I want to install is Server 10.04 LTS 64-bit. My new machine does not have a CD-ROM drive, so I had to install Ubuntu via USB flash drive.
After following Ubuntu official website instruction and use "Universal USB Installer" to "burn" iso images into USB drive, I could boot Ubuntu via USB smoothly.
However, after going to the installation menu, hitting ESC key twice to enter the command prompt screen, then typing "install modules=ppp-udeb" and going through the installation process, the installer just didn't try to probe my pppoe connection and there is nowhere to set pppoe config. Also my NIC cable had already connected to the pppoe device.
View 3 Replies
View Related
Jul 13, 2010
My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this? This forum has no such message....
View 3 Replies
View Related
Jun 26, 2010
I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?
I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )
I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.
View 2 Replies
View Related
Jul 13, 2010
My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?
View 2 Replies
View Related
Jul 12, 2010
I have minimal server installation suse 11.2 and i m trying to configure PPPoE through terminal windows but without any luck. I have DHCP activated on mine network card eth0. Mine gateway is mikrotik router board its working fine. I get an ip adres regular from dhcp server. Did someone do something like this.. does not have to be mikrotik as gateway just step by step configuration through terminal window cos i have minimal server installation... I dont use GUI cos its a web testing server on network
View 2 Replies
View Related
Dec 31, 2010
I have a ppoe internet connection. I was easier and faster to configure it in Yast than in Windows XP. When
The provider here sometimes goes through some problems and the connection may disappear and return at any unexpected moment. In Windows there is a icon on system tray that dysplays such information and I know when the connection is gone. It also allows me to try to reconnect manually. Where do I find these information on Opensuse here do I manage to reconnect. In Windows it was also possible to set the connection to re-dial automatically when it was out. It was very useful if it failed in the middle of a download, the system reconnected and the download manager retried until download resumed. Is there some way to adjust opensuse to reconnect automatically when connection fails or some software that does it? Furthermore, is there a good download manager that works in Opensuse that pause, accelerates downloads and retries when connection fails?
View 3 Replies
View Related
Feb 7, 2011
I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?
View 9 Replies
View Related
May 17, 2010
i'm searcing for libmysqlclient_r.a 64bit in openSuSE 11.2. On 10.2 it was included in libmysqlclient-devel, but now missing? Is there a package for that?
View 6 Replies
View Related
Aug 22, 2011
I have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
View 4 Replies
View Related
Jun 30, 2010
i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
View 1 Replies
View Related
Jan 5, 2010
I want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
View 2 Replies
View Related
May 13, 2010
I installed new OpenSuse11.2 but the windows(vista-64 bit) booting are missing
View 9 Replies
View Related
May 30, 2010
When I try to install opensuse 11.2 from my usb hdd it says Bootmgr is missing.I installed other distros before without any problem. Now I have windows7 installed on my pc.
View 5 Replies
View Related
Jan 15, 2011
My root partition seems to missing 1.6 GB of space. From "df -k" I get this output code...
I can't find any rootkits with rkhunter and chkrootkit, and fsck reports no errors.
Does anyone have any idea what might be going on here?
View 9 Replies
View Related
Apr 25, 2011
I've seen a few other posts well over a year or 2 old about hal.dll missing, and windows not dual booting with grub, but all of those involved resizing or moving partitions. This install i just did of opensuse 11.4 only involved formatting over a Ubuntu partition which already ran and dual booted windows xp with no problem (no problems during ubuntu install) I am hesitant to try any previous fixes posted in the forums as my issue doesn't seem to have come about for the same reasons. I thought windows and linux were playing well these days, guess not.
View 9 Replies
View Related
Jun 13, 2011
Starting a few days ago, I am unable to leave my kde session using the "leave" facilities. On a fresh login, I can select the leave button and it pops up the menu as per normal. However, whatever I select (logout, shutdown or reboot) nothing happens. I cannot now select the leave button. I click it but nothing happens.
I checked the log messages and see an error posted by kdm that grub-set-default is not in the path. I issue a find and, yeps, no grub-set-default. A week or two ago, I uninstalled CUPS. Went to make tea, came back to find a huge list of stuff being deleted. I had to abort it and spent a long while re-installing loads of stuff, for instance, even Mozzila. Can't find where to get grub-set-default so anybody know where to get it?
View 4 Replies
View Related
Jul 30, 2011
I upgraded from the 32-bit to the 64-bit openSUSE 11.4. My KDE desktop is gone from my log in options. How do I get it back?
View 9 Replies
View Related
May 22, 2011
I was trying to install openSSH on my computer and when I ran ./configure eventually came to this error:checking for openssl/opensslv.h... noconfigure: error: *** OpenSSL headers missing - please install first or check config.log ***
View 7 Replies
View Related
Dec 20, 2009
Been trying to get nxserver running on 11.2 i386 at location A and keep getting an error on connecting from client at location B.
Code:
NX> 203 NXSSH running with pid: 6439
NX> 285 Enabling check on switch command
[code]....
View 1 Replies
View Related
Apr 9, 2010
I have been missing disc space in my / partion. Was 20Go.I deleted a unsed partition and then increase my / partition to 133 Go.Did this in yast and can see that the partition has this size. But when I restart my suse, the size of the partition remains to 20Go.
View 9 Replies
View Related
Jan 1, 2011
I have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies
View Related
Jan 18, 2011
I am running OpenSuse 11.3 64 bit and I just tried to install Virtualbox 4.0.0-22.1 from the Virtualization repository.
--
ttblum@toddb05:~> VirtualBox
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed:
[code]....
View 3 Replies
View Related
Jul 11, 2010
I'm having trouble installing software from the source files. From what I can gather the problem lies with not having the correct c libraries installed. My understanding is you use the ./configure, make, and make install commands in a terminal to install. And that the configure command checks to see if you have everything to install. this is the output when I try to configure:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
[code]...
View 5 Replies
View Related
Mar 17, 2010
I was running an update to updgrade firefox to the latest version. the update timed out and now when i boot the laptop i get the command line login. Typing startx brings a screen with a black cross in the middle and a black and white background.
In the boot process a lot of errors are coming up saying "conf files need .conf". Also i have noticed an error that says the xorg.conf file is not where it should be. I know this is responsible for graphical boots so could be my problem. However yast and network services are also not working in the command line so i am unable to update to fix this. I installed from a live CD so im unsure how to use this to repair my system?
View 5 Replies
View Related
Jun 25, 2010
i am a new bee to SUSE. and managing a db2 instance on a user db2inst1. unfortunately. one i given a command userdel -rf <another name> after this the home folder is missing . i think it was deleted after the command.
View 4 Replies
View Related
Jul 21, 2010
I've got a fresh install of 11.3 on a x64 machine. I've managed to work through most of the initial hiccups and get a smooth system.However I've noticed that the 'System Logs' option in YAST is missing. Has anyone else noticed this? Is there some supplimental package that I should install? If it was removed from 11.3, is there an easy way to find and read these logs?
View 7 Replies
View Related
Sep 15, 2010
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies
View Related
Jul 17, 2010
It used to be that the dvd menu offered an option to "repair the installed system". THis was really very convenient. The openSUSE 11.3 dvd for x86 now only gives a "system rescue" option which leads to command line directl. Where have been "the repair the installed system" tools? How can we access them now? What is a reasonable set of tips that's supposed to be used after logging into "system rescue"?
View 9 Replies
View Related
May 16, 2011
After installation and deinstallation of XEN the main topic "Virtualization" is missing in the YAST control center.
Under "Software Management" I searched for "yast" but found no fitting module.
How can I reinstall?
View 2 Replies
View Related
