General :: PPPOE Server Access Internet Clients Fail To Access Internet
Aug 26, 2010
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
View 3 Replies
ADVERTISEMENT
Mar 31, 2010
I was able to connect to internet using PPPoE until I configured Samba network and set the machine as its server; does this two related? Is it possible there's a conflicting configuration, say DNS server config for example?
View 2 Replies
View Related
Jan 7, 2010
i have successfully setup PPTPD on my server and I can open a VPN tunnel but my clients can only ping the server's IP, they don't have access to the internet through the VPN.
i have searched different forums and understand that I have to create a route on the server to route packets between the VPN interface and my internet gateway, but I didn't manage to get this work.
here is what my setup looks like:
Code:
root@r31495:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:c0:c7:13:35
inet addr:94.23.197.XX Bcast:94.23.197.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 9 Replies
View Related
May 31, 2010
I have problem to access the Internet, with Ubuntu 10.04. In Windows I access the Internet in this way: Create a PPPoE Connection (with username and password), after this connect to a Wireless Network called WebSTAR (I have Wireless modem in my family PC), and connect to PPPoE Connection. After these steps the Internet works fine. .But I have same problems with Ubuntu. First I see the Network named "WebSTAR" but I can`t connect to it. And I try many times to join the Internet with "sudo pppoeconf" command in Terminal, but didn't work.
View 2 Replies
View Related
Feb 7, 2011
I need to implement at my sister this kind of connection: She is connected on Local area network that has about 50-80 pc's, but for internet access she must start an pppoe connection. For now when she wants to use lan she must put her local address (ps: they dont have dhcp), for pppoe she uses dhcp. Problem is that on that way she can't access lan and internet at the same time. She must disconnect from lan and then start pppoe connection and vice versa. I'm intrested if it is possible to have lan access at the same time as internet access. some kind of tunel through lan up to isp. I was googling little and so PPPoE tunneling. Is it that what I need here?
View 9 Replies
View Related
Apr 20, 2010
alright so i set up dhcp server and my clients are getting ip's, can ping each other, and can ping/ssh the server. but nowhere beyond that.
however if i ping an externel site, i get its IP addr, but no pings (100% loss)
im ripping my hair out over this. i know that iptables is right, but i dont know about dns
idk if this helps:
Code:
pavel@ubuntu-server:~$ cat /etc/network/interfaces
auto lo br0 eth0 eth1
iface lo inet loopback
#mapping hotplug
[Code].....
View 9 Replies
View Related
Jun 21, 2010
I must be very thick as i cannot seem to get my dhcp clients to connect to the Internet properly.
on my lucid server i installed dhcp3 server and bind9, i can ping and dig all on the local network. on the clients however, as soon as i go out of the local network there's messages like "unknown host www.google.com" or "network is unreachable".
View 9 Replies
View Related
Jan 3, 2011
I am stepping into Linux world ...and I have chosen CentOS.
I have installed CentOS 5.5 on a dedicated IBM server successfully. My server has two network cards. I have configured eth0 for lease line internet connection with a live IP (113.xxx.xxx.xxx) and eth1 for local LAN with a static IP (192.168.0.1).
Now,
1. DHCP is working fine and I can access the server from my Windows XP clients.
2. I can access the server with SSH client PuTTY from home ( with the live IP ) and from the local LAN (with static IP 192.168.0.1)
3. I can access my shared server directory 'public' from my XP clients
4. Internet is working on sever and I have updated the server with yum update.
But, I cannot access internet from my XP clients machines.
I read "The Definitive Guide to CentOS" and tweaked the config files in different ways but it did not help. now after two sleepless nights I am here as my last hope.
I admit, I am not aware of every linux terms and commands, but I am getting into it. code...
View 8 Replies
View Related
Jul 3, 2009
I just tried installing Google Earth on my fresh 64 bit Fedora 11 install using autoten, which I used earlier to install java and some codecs. I also used leighs guide to install 64 bit flash and remove nspluginwrapper. All was working fine. Then I decided to use autoten to install googleearth. It failed early giving an error saying:
First error was:
resolving dnmouse.org... failed: Name or service not known.
wget: unable to resolve host address `dnmouse.org'
Error getting repository data for googleearth, repository not found
# checking installation..
Size of report file is 0 lines
Error window opened up saying:
Google earth, was not installed correctly, please check you have an active connection. From this point on, Firefox cannot access the internet. I can ping google.com and dnmouse.com successfully. I did the update that included the new firefox 3.5, so accessing the internet and my connection is active. Konversation is working correctly. Just firefox is having the problem. Message: Firefox can't find the server at start.fedoraproject.org, or google, or redhat etc.
I renamed the .mozilla folder, and restarted firefox, no luck. My /etc/resolve.conf contains the correct nameservers. Also tried a reboot, no luck, still have active eth0 connection but no FF internet access.
View 9 Replies
View Related
May 14, 2010
I have a local network of two computers running ubuntu connected via a Netgear FR114P. I also have one of the computers connected WiFi to the internet. Can I get on the internet from the alternate computer via the network? Some assistance is appreciated as I am a relative newcomer to this area.
View 2 Replies
View Related
May 31, 2010
I have a server at home running as a file server and DHCP connected to a switch with a wireless AP in there as-well. with this setup I can access the files and do some configurations via SSH on the actual server anytime I'm able to get the wireless signal, now lately I felt the need to be able to do the same but this time over the internet. I've read somewhere already that I'm gonna need a router with port forwarding and NAT, then know the IP address of the server but my problem is once you start talking about routers then you need broadband connection which is something I don't have. Getting a router is not much of a problem but without ADSL like connection I guess its useless, what do I need to do?
View 7 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
Jun 11, 2010
I have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
View 2 Replies
View Related
Jul 6, 2011
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies
View Related
Nov 2, 2010
Ok i want to access my server from internet, ok I have checked with my mobile internet provider (3) they say they dont block any ports, is it just a case of letting the firewall let external access to pc? ( no router just mobile dongle)And do i just ssh into external ip on ssh port
View 2 Replies
View Related
Jul 15, 2010
Is there a safe way for me to configure my server for access from any internet connection as well as from my home/office LAN? I'd like to be able to access file shares, webmin, the router console behind my Gateway for maintenance purposes. Access to Server Desktop itself would be a bonus.
View 12 Replies
View Related
May 20, 2011
I am using a CentOS 5.4 server for Snort (it's actually using the easyIDS config). I'm trying to modify some things, and I've noticed that I can't seem to download any files. WGET, FTP, etc... all just time out. It's not a network firewall issue, as I've been monitoring the logs and see no blocked traffic, and other machines on the subnet can get outside with no problems. I checked the Cent firewall using the setup command, and it says it is disabled as well. I'm very new to linux, so I'm wondering how I can troubleshoot this? The wget and ftp errors just say the connection timed out, but I'm not sure why.
View 2 Replies
View Related
Feb 28, 2010
I've been able to make my server connect to my clients but not able to share the internet connection. I've been searching around but haven't come across an answer yet. Hoping someone here will point me in the right directiong. I have the following setup running. I'm trying to make an internet connection go through my server but haven't been able to get it to work.
[Code]...
View 2 Replies
View Related
Jan 20, 2011
I'm curious but recently I was troubleshooting some iptables rules to allow nfs clients access to my nfs server. What was strange was that I setup a tcpdump session on my nfs server so that I can see which ports were being requested. I ran several tcpdump sessions with the following filters in place.
tcpdump -vv src ip_of_client and dst _ip_of_client
tcpdump -vv src hostname_of_client and dst hostname_of_client
However, the only packet I ever saw come over the wire to me was the client host asking for a arp resolution. Anyhow, I finally just ran 'rcpinfo -p' and added those ports to my iptables rules and it worked great. However, I would like to understand how nfs works in case I need to troubleshoot it in the future. I do understand that nfs uses portmappers, would this explain the behavior?
View 1 Replies
View Related
Jun 19, 2011
I have a server that was set up by a friend so I have a location to save all my documents for work in a RAID array.
It is on a static IP address, I can ping the hub and other computers on the network absolutely fine.
I can't connect to the internet, the router in question is a Netgear CG3101D. Logging into the router I can see that the server is a trusted device and in all the parameters are the same as other computer running Ubuntu Studio.
Does anyone have any tips of how I can find out how to find what is wrong?
It is Ubuntu 10.04.2 LTS (Lucid).
View 3 Replies
View Related
Jul 8, 2011
First off - I'm running 11.04 as a VPS on an OpenVZ.
I've set up a very basic environment of LAMP + mail server. Installing apache, php, mysql and proftpd all went fine, but whenever I install iRedMail (which is postfix + dovecot + clamav and few more packages) I lose the internet connection.
Although the server is easily reachable by ssh and http, I can't connect anywhere from the server. At first I thought it only had issues with resolving domain names, but now I see it doesn't even ping IPs as well.
Code:
# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code]....
View 1 Replies
View Related
Jan 15, 2011
I have install centos 5 in my dell laptop, now i want to configure and run wifi to access internet through wireless.
View 5 Replies
View Related
Jan 2, 2011
I'm setting up an old box as a dedicated file-sharing server on the LAN as well as an internet web server for my personal web site but I have no network connection. My computer is connected to a router which is connected to my DSL modem. The router has the Ubuntu box's MAC address as well as a Win7 box, which connects to the internet fine.
Here is what I've tried:
1. Check routing table
Code:
2. Try to add a default gateway to the internet on eth2, this happens:
Code:
3. I edited resolv.conf, which was empty, adding:
4. I edited /etc/network/interfaces as follows:
Code:
Then I type the following:
Code:
And it keeps doing this endlessly because it's not finding the DHCP server, presumably...? This didn't solve the problem and so I attempted another configuration:
Code:
Still, not internet connection and no ability to apt-get anything (says packages not found)
So, this didn't work either. What I've tried should work, especially the route command. Now why won't it work?
View 13 Replies
View Related
Mar 7, 2011
I am having a server in a corporate data centre. There are some virtual machines running on it.The main server is accessible from internet via SSH. There are some people who within the lan access the virtual machines whose IPs on LAN are
Quote:
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
from internet only one host is allowed SSH. This machine has public IP and is also connected to LAN on the IP 192.168.1.50. Tunnel is not allowed on our network.So now I am came across a solution as explained on this link. I am not clear with on which machine .ssh/config file I add following
Code:
Host securehost.example.com ProxyCommand ssh user1@insidemachine.com nc %h %p Should above be done on gateway where public IP and ssh is allowed or client on internet who has to login. Do I need to create separate accounts on the gateway also so that the users who can SSH to gateway then are forwarded to inside machines? Or one account on gateway is sufficient for different people logging in via internet to my gateway and then forwarded to internal machine?
Then do I need to create an account user1 on the gateway also?
1) What is the correct syntax for ProxyCommand on gateway's .ssh/config should I use
Code:
ProxyCommand ssh user1@inside.machine nc %h %p
or I should use
Code:
ProxyCommand ssh user1@gateway.com in nc %h %p
2) Should I create new user accounts on gateway also which exist on internal machine?
View 4 Replies
View Related
Apr 28, 2010
Centos 5.4 distro using on remote machine. I have remote site where internet access given via squid proxy. So when we enter in browser it start working internet fine. But on command line (bash shell prompt terminal) like wget, ping, nslookup, traceroute etc., these commands does not work.
View 6 Replies
View Related
Jul 24, 2010
I've a SQUID proxy server installed in SUSE 9.0 ES server. I've created cache dirs on seperate partitions for better caching. Its working fine. But since last 15-20 days, i've experienced very slow net access to clients. I've gone through the /var/log/messeges file, it generates a two line error messeges
client read request fd602 invalid request
parse http request: unsupported method;HET
This messege increases as the number of clients increates (for internet access). The apperance of error messege lowering down as soon as the number of clients reduces.
As the count of clients increases error messeges increases, internet access getting slower and slower.
View 1 Replies
View Related
Feb 20, 2010
I have configured squid server and it is working fine. I want that only specific ip addresses in my LAN should be able to access internet and for that I have given these entries in access control lists in squid.conf file:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443
acl Safe_ports port 80
acl Safe_ports port 21
acl Safe_ports port 443
acl Safe_ports port 70
acl Safe_ports port 210
acl Safe_ports port 1025-65535
acl Safe_ports port 280
acl Safe_ports port 488
acl Safe_ports port 591
acl Safe_ports port 777
acl CONNECT method CONNECT
acl QUERY urlpath_regex cgi-bin ?
acl apache rep_header Server ^Apache
acl our_networks src 192.168.0.181/255.255.255.0 192.168.0.182/255.255.255.0
And in http access I have given this:
http_access allow our_networks
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access deny all
In this I want that only 192.168.0.181 and .182 should be able to access internet but Now the problem is that all the IPs in the LAN like 192.168.0.20 are also able to access internet. What changes I need to do to allow access to specific IP addresses. I am not using any firewall or iptables entries and i am manually changing in the firefox at client side to access internet.
View 3 Replies
View Related
Sep 29, 2010
Am using Suse 10.2 for internet and e-mail server. currently all my users have access to the internet if they know how to setup their web browsers. how do i deny some users internet access so that a user can only access his/her e-mail but not internet.
View 1 Replies
View Related
Dec 14, 2010
I was having a hard time configuring ubuntu server with command line so this is the steps I did to install the GUI;
Code:
then
Code:
then
Code:
The GUI started up fine and I logged in as root, then I tried Update Manager and received this error message:
Requires installation of untrusted packages
I tried this in terminal window
Code:
and got
W: Failed to fetch [url]........(-5 - No address associated with hostname
So I did System Testing and got the result that my network was fine but my internet failed!
I could do command line update no problem before installing GUI. I can see it on the network on another computer though.
Trying to setup without the GUI is starting to look easier than with.
View 10 Replies
View Related
