how to setup PPPoE on ubuntu or even fedora which requires only username and pass to login.
as for pppoeconf.. it gives me error some modconf not found.
I currently have 10.04 installed and would like to update it after getting the internet working .
I won't be able to connect to internet in ubuntu so don't tell me methods which will require me to access internet IN ubuntu. If some downloading from windows is required it's good.
I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies View RelatedI've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)
system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..
My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?
View 6 Replies View RelatedMy server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this? This forum has no such message....
View 3 Replies View RelatedMy server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?
View 2 Replies View RelatedI would like to set up a PPPoE server based on CentOS 5.5 i386, in order to give public IP addresses to my customers. Does have anyone a tutorial or can you give me some clues ?
View 1 Replies View RelatedI'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
i want to create the wireless pppoe wireless network but it just dont show any help for pppoe connections.i tried with network manager but it works only for eth0 (not for ethl)
View 3 Replies View RelatedI finally managed to install pppoe and pppoeconf. When I type command 'pppoeconf' , it invokes some window and I put username, passwd etc. But my net connection won't start. I have posting the output of various commands related to networking.ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:0f:b0:4a:54:a7
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fe4a:54a7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1388 errors:0 dropped:0 overruns:0 frame:0
[Code]...
Previously i use Ubuntu 10.10 , After installing BackTrack to hard disk, how do i configure a PPPoE / ADSL connection with username and password. i don't know where to find any config. application. In ubuntu i have network connections on taskbar so that i configured easily, but in Backtrack how to do that ?
View 1 Replies View RelatedPPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.
View 11 Replies View RelatedI have trouble connecting to internet when connecting using pppoe-start, even though it says it's connected and the pppoe interface is there. I test the connection by sending a ping to a known IP address and got "destination unreachable".
View 2 Replies View RelatedI use d-link to share network with my other PCs.PC is connected to D-link via Ethernet and I can't understand what should be written in /etc/network/interfaces to have Internet.I tried to add option "auto eth0" to /etc/network/interfaces butshould I alsough include? Or how can I reconfigure it manually.
View 1 Replies View RelatedI am trying to configure a computer to make it as DHCP server.Well, my current connection is PPPOE.So, I should assign one interface to connect as PPPOE, and the other will be broadcast DHCP server.What configuration shall I apply to the dhcp.conf file?
View 3 Replies View RelatedI was able to connect to internet using PPPoE until I configured Samba network and set the machine as its server; does this two related? Is it possible there's a conflicting configuration, say DNS server config for example?
View 2 Replies View RelatedCurrently I use openSUSE but the 6 months release cycle is starting to bug me a bit so yesterday I have tried Debian Testing daily snapshot created on 20-11-2010, using KDE desktop (I am a KDE fun). All goes well until I try to make a pppoe using KDE's module network manager.
I created the pppoe connection with user and password but I got 2 problems:
- After I have created the connection it doesn't appear along with "Auto eth0" above the button manage connections.
- The pppoe connection is not established (both password and username are correct).
I know that I could use pppoeconf or ceni for that matter, but I am new to debian as I where new to openSUSE 4 years ago and I am still learning, so please don't tell to use them I just want to know if there's a way to use network manager from kde 4.4.5 to establish a pppoe connection (you could name it the GUI way, no worries I like using the console as well). Under openSUSE I have a program called qinternet that helps me with pppoe connection is there something similar under Debian?
I need a linux distro who provides the following:1) Has an partitioner who can resize fat , ntfs ,ext* , .....filesystems.2) Has an excellent hardware support3) The installer can install console or graphic mode 4) The updating can be done via console5) In console can be configured internet via: static IP , DHCP , PPPOE and preferably to have support for USB modems.
View 8 Replies View RelatedI've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
Yesterday I bought a netbook and a wifi router (TP-Link), I connected the ADSL modem to the router, then the router (output) to the ehternet in the desktop with U 9.10. I configured the router to dial the modem.
The router dials the modem, the modem connects, and I have wifi at home, the netbook (still with W7) connects to the wifi network. So far so good.
BUT now the Ubuntu in the desktop doesn't connect. No netwok. If I run sudo pppoeconf, after a scanning process it says that probably there's another pppoe proccess that is controlling the modem. I guess it tries to dial.
Later, when I install U 10.10 in the notebook I'll have to struggle with the wifi network..
I use win7 bit and input the ISP username and password, it runs well,but after I swap system to Ubuntu 11.04 64bit, I cant use the username and password to run DSL successfully.I use the
PHP Code:
sudo pppoeconf
A text-based menu program will guide you through the next steps, which are:
Confirm that your Ethernet card is detected.
Enter your username (provided by your ISP).
Enter your password (provided by your ISP).
If you already have a PPPoE Connection configured, you will be asked if it may be modified.Popular options: you are asked if you want the 'noauth' and 'defaultroute' options and to remove 'nodetach' - choose "Yes".[code]................
I am a newbie to Linux just installed Ubuntu 9.10 using WUBI. I am not able to connect to Internet using PPPoe. I went thru some of the threads and tried PPPoeconf and it works. So how to configure Network Manager so that it works.
View 1 Replies View RelatedThe Ubuntu version I want to install is Server 10.04 LTS 64-bit. My new machine does not have a CD-ROM drive, so I had to install Ubuntu via USB flash drive.
After following Ubuntu official website instruction and use "Universal USB Installer" to "burn" iso images into USB drive, I could boot Ubuntu via USB smoothly.
However, after going to the installation menu, hitting ESC key twice to enter the command prompt screen, then typing "install modules=ppp-udeb" and going through the installation process, the installer just didn't try to probe my pppoe connection and there is nowhere to set pppoe config. Also my NIC cable had already connected to the pppoe device.
i configured net and LAN setting for it but i cannot make them work together using pppoe....how do i dailup both together and work properly..!!
in windows xp i use to untick use default gateway to make them work simultaneuosly but there is no option like that in ubuntu..!!
I have 2 PC's : a desktop and an notebook(IBM).On my desktop i have Windows 7 and Ubuntu 9.10,and on my notebook(IBM) is Windows XP SP3. Both of the PC's are conected to internet over an PPPoE conection in Windows thorugh my router(EDIMAX).
My desktop has the following :
IP adress : 192.168.2.100
Subnet mask : 255.255.255.0
Default gateway : 192.168.2.1
Preferred DNS server : 192.168.2.1
[Code]...
When i boot to Ubuntu 9.10 i dont have internet...but if i restart the PC and enter in Windows 7 there is internet,and is the same connection,the same adresess. How can i make the connection in Ubuntu 9.10 with the same adress,i mean like is in Windows 7?
I just got lost. I have set up a server with two nics. eth0 for the lan and eth1 for the Internet. I have dhcp running on the server. I am using adsl and have run pppoeconf to set up my connection. I have turned off dhcp and nat on the router so the device works as a modem using bridge mode.The problem I have is that the server keeps hanging when loading pppoe or at least when pppoe has completed getting the public DNS addresses.What happens is that the Internet connection can be opened from the /network/interfaces file. This seems to work but it does not return control to the server - the process runs, the DNS addresses obtained but the rest of the processes following at start up never load (i.e. power on the server and the processes that load then).
So I thought that this must be in the wrong place. I commented out the items in the interface file and added a couple of entries to end of rc.local, my logic being that this will load after everything has finished. Nearly right but not. What happens is that all processes run and then the pppoe program runs and the DNS addresses obtained (seen from a screen connected to the server). But the system then stops. What should happen is that it continues to load and at the end return the login prompt.From a client I can see that dhcp has loaded since a private IP has been allocated but I cannot login from that client since the server has not finished loading.I am not sure what I have not done here since reading round I can see that what I have followed is the same as everyone else but I get a different result.
i am completely new to the world of Linux. But i want to learn it. My problem is , i cannot connect my PC to internet. I have a shared broadband connection which needs username and password to connect to internet. I don't know clearly but its something pppoe connection through wan mini port. or xdsl. I contacted my isp but in Our country (Bangladesh) a very few people use Linux or Ubuntu so they cant help me out. i searched many forums,, googled everywhere but cant make it working. i tried some command like "sudo pppoeconfig" but still dont understand. I know there are many people who know how to do this. My Pc configuration:
Processor: Intel Core2duo E8400 3.00GHz
Motherboard: Intel DG41TY
Ram: Transend 2GB 800 buss
Hdd: Samsung sata 400gb
Lan: Realtek PCie GBe family (built-in)
Ubuntu 9.10
I have Fedora 13 also. It looks almost similar to ubuntu at network connection.. is the settings will be the same.
I use pppoe connection over wireless network, for long time I've used console, so I didn't had any problem with it, BUT - after installing gnome, I can't connect to the wireless ISP. On my network manager I see my wireless network, I can connected to it, but when I do it, I don't see DSL connection on my menu, If I only connect cable to it, DSL connection is showing again. What should I do to see the DSL connection when only wireless is connected ?
View 2 Replies View RelatedI have problem to access the Internet, with Ubuntu 10.04. In Windows I access the Internet in this way: Create a PPPoE Connection (with username and password), after this connect to a Wireless Network called WebSTAR (I have Wireless modem in my family PC), and connect to PPPoE Connection. After these steps the Internet works fine. .But I have same problems with Ubuntu. First I see the Network named "WebSTAR" but I can`t connect to it. And I try many times to join the Internet with "sudo pppoeconf" command in Terminal, but didn't work.
View 2 Replies View Related