Ubuntu :: Can't Connect To PPPoE
Mar 5, 2011
Yesterday I bought a netbook and a wifi router (TP-Link), I connected the ADSL modem to the router, then the router (output) to the ehternet in the desktop with U 9.10. I configured the router to dial the modem.
The router dials the modem, the modem connects, and I have wifi at home, the netbook (still with W7) connects to the wifi network. So far so good.
BUT now the Ubuntu in the desktop doesn't connect. No netwok. If I run sudo pppoeconf, after a scanning process it says that probably there's another pppoe proccess that is controlling the modem. I guess it tries to dial.
Later, when I install U 10.10 in the notebook I'll have to struggle with the wifi network..
View 4 Replies
ADVERTISEMENT
Dec 30, 2010
Previously i use Ubuntu 10.10 , After installing BackTrack to hard disk, how do i configure a PPPoE / ADSL connection with username and password. i don't know where to find any config. application. In ubuntu i have network connections on taskbar so that i configured easily, but in Backtrack how to do that ?
View 1 Replies
View Related
Mar 27, 2010
I have trouble connecting to internet when connecting using pppoe-start, even though it says it's connected and the pppoe interface is there. I test the connection by sending a ping to a known IP address and got "destination unreachable".
View 2 Replies
View Related
Jan 11, 2009
I have been dist hunting ever since I bought my new desktop in Sept 08. some live cd or even install cd work or don't-- but I have learned some workarounds i.e. pci=nomsi at boot for example. Problem I have now is I have wired DSL (modem only) and need to manually connect. I can install tkpppoe running ./go-gui command but everytime I do I can send out packets but not ever recieving (correct me if I have this backwards). in other words activity is showing upload but not on downloads and can't ping either ip or domain or browse. been trying to find out what's going on I think it may have to do with the eth0 should not pull up an IP at boot which seems to be 192.147.x.x or like that according to ifconfig -a Otherwords, when I covert my modem to a router every is fine but manually connecting with PPPoE software that's another story. I would go with the router mode but the Westell model I currently have sucks with it's firewall. I usually go with a software based firewall. call me old skool lol. Need some advice.. I miss my journey with linux Even though I have Vista Premium solid as a rock--- I miss the special customizations only nix can provide and better security.
View 1 Replies
View Related
Nov 6, 2010
I'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 5 Replies
View Related
Nov 6, 2010
I'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 7 Replies
View Related
Jun 30, 2010
i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
View 1 Replies
View Related
Feb 10, 2011
Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies
View Related
Jul 16, 2011
I use win7 bit and input the ISP username and password, it runs well,but after I swap system to Ubuntu 11.04 64bit, I cant use the username and password to run DSL successfully.I use the
PHP Code:
sudo pppoeconf
A text-based menu program will guide you through the next steps, which are:
Confirm that your Ethernet card is detected.
Enter your username (provided by your ISP).
Enter your password (provided by your ISP).
If you already have a PPPoE Connection configured, you will be asked if it may be modified.Popular options: you are asked if you want the 'noauth' and 'defaultroute' options and to remove 'nodetach' - choose "Yes".[code]................
View 1 Replies
View Related
Jan 10, 2010
I am a newbie to Linux just installed Ubuntu 9.10 using WUBI. I am not able to connect to Internet using PPPoe. I went thru some of the threads and tried PPPoeconf and it works. So how to configure Network Manager so that it works.
View 1 Replies
View Related
Jan 20, 2011
I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.
View 3 Replies
View Related
May 22, 2011
The Ubuntu version I want to install is Server 10.04 LTS 64-bit. My new machine does not have a CD-ROM drive, so I had to install Ubuntu via USB flash drive.
After following Ubuntu official website instruction and use "Universal USB Installer" to "burn" iso images into USB drive, I could boot Ubuntu via USB smoothly.
However, after going to the installation menu, hitting ESC key twice to enter the command prompt screen, then typing "install modules=ppp-udeb" and going through the installation process, the installer just didn't try to probe my pppoe connection and there is nowhere to set pppoe config. Also my NIC cable had already connected to the pppoe device.
View 3 Replies
View Related
Jun 5, 2011
i configured net and LAN setting for it but i cannot make them work together using pppoe....how do i dailup both together and work properly..!!
in windows xp i use to untick use default gateway to make them work simultaneuosly but there is no option like that in ubuntu..!!
View 3 Replies
View Related
Dec 1, 2010
how to setup PPPoE on ubuntu or even fedora which requires only username and pass to login.
as for pppoeconf.. it gives me error some modconf not found.
I currently have 10.04 installed and would like to update it after getting the internet working .
I won't be able to connect to internet in ubuntu so don't tell me methods which will require me to access internet IN ubuntu. If some downloading from windows is required it's good.
View 3 Replies
View Related
Feb 4, 2010
I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.
It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.
(NO iptables configured, NO HTB, CBQ ...etc configured) .
EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).
View 2 Replies
View Related
Feb 21, 2010
I have 2 PC's : a desktop and an notebook(IBM).On my desktop i have Windows 7 and Ubuntu 9.10,and on my notebook(IBM) is Windows XP SP3. Both of the PC's are conected to internet over an PPPoE conection in Windows thorugh my router(EDIMAX).
My desktop has the following :
IP adress : 192.168.2.100
Subnet mask : 255.255.255.0
Default gateway : 192.168.2.1
Preferred DNS server : 192.168.2.1
[Code]...
When i boot to Ubuntu 9.10 i dont have internet...but if i restart the PC and enter in Windows 7 there is internet,and is the same connection,the same adresess. How can i make the connection in Ubuntu 9.10 with the same adress,i mean like is in Windows 7?
View 2 Replies
View Related
Apr 22, 2010
I just got lost. I have set up a server with two nics. eth0 for the lan and eth1 for the Internet. I have dhcp running on the server. I am using adsl and have run pppoeconf to set up my connection. I have turned off dhcp and nat on the router so the device works as a modem using bridge mode.The problem I have is that the server keeps hanging when loading pppoe or at least when pppoe has completed getting the public DNS addresses.What happens is that the Internet connection can be opened from the /network/interfaces file. This seems to work but it does not return control to the server - the process runs, the DNS addresses obtained but the rest of the processes following at start up never load (i.e. power on the server and the processes that load then).
So I thought that this must be in the wrong place. I commented out the items in the interface file and added a couple of entries to end of rc.local, my logic being that this will load after everything has finished. Nearly right but not. What happens is that all processes run and then the pppoe program runs and the DNS addresses obtained (seen from a screen connected to the server). But the system then stops. What should happen is that it continues to load and at the end return the login prompt.From a client I can see that dhcp has loaded since a private IP has been allocated but I cannot login from that client since the server has not finished loading.I am not sure what I have not done here since reading round I can see that what I have followed is the same as everyone else but I get a different result.
View 1 Replies
View Related
Apr 29, 2010
I've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)
system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..
View 6 Replies
View Related
Jun 26, 2010
i am completely new to the world of Linux. But i want to learn it. My problem is , i cannot connect my PC to internet. I have a shared broadband connection which needs username and password to connect to internet. I don't know clearly but its something pppoe connection through wan mini port. or xdsl. I contacted my isp but in Our country (Bangladesh) a very few people use Linux or Ubuntu so they cant help me out. i searched many forums,, googled everywhere but cant make it working. i tried some command like "sudo pppoeconfig" but still dont understand. I know there are many people who know how to do this. My Pc configuration:
Processor: Intel Core2duo E8400 3.00GHz
Motherboard: Intel DG41TY
Ram: Transend 2GB 800 buss
Hdd: Samsung sata 400gb
Lan: Realtek PCie GBe family (built-in)
Ubuntu 9.10
I have Fedora 13 also. It looks almost similar to ubuntu at network connection.. is the settings will be the same.
View 1 Replies
View Related
Dec 3, 2010
I use pppoe connection over wireless network, for long time I've used console, so I didn't had any problem with it, BUT - after installing gnome, I can't connect to the wireless ISP. On my network manager I see my wireless network, I can connected to it, but when I do it, I don't see DSL connection on my menu, If I only connect cable to it, DSL connection is showing again. What should I do to see the DSL connection when only wireless is connected ?
View 2 Replies
View Related
May 31, 2010
I have problem to access the Internet, with Ubuntu 10.04. In Windows I access the Internet in this way: Create a PPPoE Connection (with username and password), after this connect to a Wireless Network called WebSTAR (I have Wireless modem in my family PC), and connect to PPPoE Connection. After these steps the Internet works fine. .But I have same problems with Ubuntu. First I see the Network named "WebSTAR" but I can`t connect to it. And I try many times to join the Internet with "sudo pppoeconf" command in Terminal, but didn't work.
View 2 Replies
View Related
Apr 18, 2010
i have setup my connection with pppoeconf command ...i had not started it at boot time..i make a script like this....
Code:
#!/bin/bash
echo "Connecting"
[code]....
View 1 Replies
View Related
Apr 22, 2010
My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?
View 6 Replies
View Related
May 28, 2010
I have ubuntu 9.04,when i configure my internet connection using pppoeconf i had got this result
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I cant access internet through linux,plz help any reply will be appreciated
View 2 Replies
View Related
Jul 5, 2010
i have a routed and a PPPoE type internet connection, recently i tried a thing in terminal with the pppoeconf option since the network manager has problems with connectiong to the internet with a pppoe DLS connection, or anyway in my case it does not work. Ok i did the pppoeconf thing i inserted my pass and my user and left the program to do its thing, ok it all worked fine but then i restarted my system and suddenly the network manager did not want to recognize my network it hat as options some weird ipupdown options for connection and when i tried the pppoeconf thing again it did not work. what could i do to reactivate at least one way my connection, if i understood correctly the terminal type connecting and the network manager are two different things. now i am using my router and it should connect but the network manager still does not see the connection.
View 3 Replies
View Related
Nov 25, 2010
i m new to ubuntu i want to create a pppoe client with a service name. i used to create it with pppoeconf but it is not asking me for the service name. i went to /etc/ppp/peers then i typed gedit dsl-provider. i opened the file
[code]...
i put in the bottom servicename="ROG". when i pon dsl-provider it said unrecognized option servicename. i put in the header of the file this line : pty "/usr/sbin/pppoe -I wlan0 -T 80 -m 1452 -S ROG". nothing changed i still cant connect.
View 9 Replies
View Related
Dec 4, 2010
Does anyone know of an application other than NetworkManager that will allow me to connected to WAN via PPPoE over WLAN?
View 4 Replies
View Related
Feb 27, 2011
ubuntu: 10.10 Updated
Modem: Dlink DSL2740U
Internet: ADSL
Phone: Galaxy S I9000 (WiFi)
I set username/password in modem (PPPOE mode) and when modem is Turn On, I connected to Internet. but in opening site or download file (any send packet) I have to wait ~20 sec to replay server. but if I use Bridge mode in modem I connect to Internet by ubuntu pppoe connection everything is fine and speedy.
I need to set username/password in PPPOE mode cuse my phone is thirsty of Internet.
I don't have this issue in Phone or Windows.
I can't send this thread, after ~20 sec waiting, Firefox wants to download a "newthread.PHP" file ! I have to Exchange to bridge mode!
View 3 Replies
View Related
Jul 22, 2011
Is it possible to add the routes to my routing table for dynamic pppoe connections? I have this setup on windows 7 with power-shell scripting and some 3rd party commercial pppoe client called Cfos, but since I'm now trying to move away from windows to Ubuntu and cant use the same programs anymore and its getting abit tricky now. I'm not trying to do any fancy load balancing here just some basic stuff which should be possible. Here is same basic info.
My ISP resets my pppoe connection every 24 hours. However the advantage of this is that I can call out 2 or more simultaneous PPPOE connections through the same modem. This is my routing table I wrote which has 5 PPPOE connections [URl]..Id like this to be automated when the PPPoes reconnect and the computer restarts.
View 2 Replies
View Related
Feb 26, 2010
i want to create the wireless pppoe wireless network but it just dont show any help for pppoe connections.i tried with network manager but it works only for eth0 (not for ethl)
View 3 Replies
View Related
