General :: How To Create Wireless Pppoe Connection In Ubuntu 9.10?

Feb 26, 2010

i want to create the wireless pppoe wireless network but it just dont show any help for pppoe connections.i tried with network manager but it works only for eth0 (not for ethl)

View 3 Replies


ADVERTISEMENT

Fedora Networking :: Not Able To Create PPPoE Connection

Jun 16, 2009

I have just installed FC11 from a DVD I created from an ISO.I also have FC10 (using here) and Windoze XP pro all on separate HDDs.I have not been able to configure my internet connection, when I try to create a new xDSL connection I get an error message; package needed 'rp-pppoe'.I don't now how to get the package without a connection.I have tried with and without Network Manager.

View 2 Replies View Related

Ubuntu Networking :: How To Setup PPPOE Connection Over Wireless

Apr 22, 2010

My adsl modem is in bridge mode. I can connect to internet via pppoe . pppoeconf recognise the pppoe in eth0 and setup a connection and I can use it. How can I setup a pppoe connection using pppoeconf so that it uses wireless ? I set the wireless mode to bridge in modem settings. But, after that the access point stopped appearing in "aps in range" in network manager and I can't connect to it. pppoeconf also doesn't recognise wlan0 as a valid pppoe link . but dat is normal since i don't think it can check if wlan0 is pppoe without wlan0 being connected to the modem's wireless network. How can I connect to Internet with modem in bridge mode and connections via wireless interface of modem? Is pppoe over wireless even possible ? coz the datalink layer of wlan is not ethernet rite?

View 6 Replies View Related

Ubuntu Networking :: Uses PPPoE To Configure A Connection To Their Wireless Broadband?

Jun 26, 2010

I am deployed to Iraq and the Earthlink ISP here uses PPPoE to configure a connection to their wireless broadband. His english skills are pretty good and from what I gather, he's got a DSL connection that he's trying to connect me to. He showed me how he does it on a Windows machine but I can't figure it out on my ubuntu laptop. That windows machine didn't need any IP addresses or server names. It only used a username and password to connect. Of course a strong wireless signal detected was also pre-requisite.

I know my laptop works because I've had great success with it here lately, just not on the Earthlink service.I see their wireless is broadcast and I can connect to it. I just can't figure out how to post my credentials and authenticate.I don't see a way of entering my username and password because I don't know how to install (or configure) for PPPoE.I did use the pppoeconfig and got to the part where I add my username and password, but most of what's going on up to and after that, I do not have the knowledge base to use. So I figured that allowing the defaults and recommended settings would be acceptableYou'll have to forgive me if I've asked another dumb question here. I'm another one of those Linux enthusiasts who is learning and I'm just not willing to switch back to MS just to get internet while deployed.

View 1 Replies View Related

Ubuntu :: No Wireless Network After Trying To Establish PPPoE Connection In Karmic Koala?

Mar 31, 2010

I installed ubuntu Karmic Koala 2 weeks ago, and while I have been able to connect to my school wireless, I have not been able to establish a PPPoE connection (username and password).After my most recent try, following this guide:-karmic.htmlMy wireless connection has gone as well.My network manager applet shows my school network, and shows that it is trying to connect, but it cannot establish a connectionand i apologize in advance for any information that i am lacking. please let me know, and i'll try to get the information.I'm running ubuntu on a separate partition, alongside windows XP home.

View 2 Replies View Related

CentOS 5 Networking :: Create PPPOE Connection On Text Based CentOS?

Jan 1, 2010

How can i add a PPPOE connection witch connect automatically on system start up in text mode in centos 5.4

View 3 Replies View Related

General :: How To Create Wireless Connection In Ubuntu9.1?

May 2, 2010

how to create wireless connection in Ubuntu9.1??can u please guide...

View 2 Replies View Related

General :: Slow Pppoe Connection Using Ubuntu 9.10?

Feb 4, 2010

I have a Compaq Presario CQ61, instaled Ubuntu 9.10 and Windows 7 on it.

It works great except the PPPoE connection in Ubuntu, when i dial in Windows my download speed reach up to 91 Mb, rebooted in Ubuntu, downloaded same file from the same server with a speed of maximum 3 Mb, cheked in Windows again 80 - 90 Mb constant. I can't figure what slow's the internet connection in Ubuntu.

(NO iptables configured, NO HTB, CBQ ...etc configured) .

EDIT: I don't have any modem or router. I am using PPPoE directly from my PC. I didn't mentioned that I instaled Ubuntu two times but didn't figured out what was causing the problem, so I instaled Fedora 12 (64), this works fine and the speed reached 85 Mb. I instaled latest Ubuntu 10.4 on the same Laptop, the problem is not solved, the speed reaches up to 3Mb, when in Windows or Fedora reaches up to 95 Mb (yesterday).

View 2 Replies View Related

General :: PPPOE Connection Timed Out

Apr 24, 2011

PPPOE connection Timed Out-i have downloaded the rp-pppoe utility and installed for PPPOE connection.As per the instruction given with the utility i followed that .i have given pppoe-setup and given all the parameters required like service name , username ,password,firewall as none ,dsn as server an all the option .finally i got the message as congratulation you have successfully setup the pppoe connection.you can use pppoe-start and pppoe-status.

View 11 Replies View Related

General :: PPPOE Connection With DHCP Server

Aug 12, 2010

I am trying to configure a computer to make it as DHCP server.Well, my current connection is PPPOE.So, I should assign one interface to connect as PPPOE, and the other will be broadcast DHCP server.What configuration shall I apply to the dhcp.conf file?

View 3 Replies View Related

General :: PPPoE Connection Not Established Under Debian Testing

Nov 21, 2010

Currently I use openSUSE but the 6 months release cycle is starting to bug me a bit so yesterday I have tried Debian Testing daily snapshot created on 20-11-2010, using KDE desktop (I am a KDE fun). All goes well until I try to make a pppoe using KDE's module network manager.

I created the pppoe connection with user and password but I got 2 problems:
- After I have created the connection it doesn't appear along with "Auto eth0" above the button manage connections.
- The pppoe connection is not established (both password and username are correct).

I know that I could use pppoeconf or ceni for that matter, but I am new to debian as I where new to openSUSE 4 years ago and I am still learning, so please don't tell to use them I just want to know if there's a way to use network manager from kde 4.4.5 to establish a pppoe connection (you could name it the GUI way, no worries I like using the console as well). Under openSUSE I have a program called qinternet that helps me with pppoe connection is there something similar under Debian?

View 2 Replies View Related

Networking :: Setup PPPoE Connection To Establish DSL Connection?

Apr 23, 2010

I'm trying to setup PPPoE connection to establish my DSL connection, but I got

Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.

When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?

View 2 Replies View Related

Ubuntu Networking :: Create A Wireless DSL Connection?

Nov 1, 2010

Under DSL tab in network connection we can create DSL connections, but they only allow wired connections(eth0). I need to connect using wireless connection(wlan0). I migrated to Ubuntu recently. With windows I was able to connect with wireless connection. I'm sure there is a way to achieve this in Ubuntu as well.

I'm using Ubuntu 10.10 (using since 9.10)

View 7 Replies View Related

Ubuntu Networking :: Create Pppoe Client With Servicename

Nov 25, 2010

i m new to ubuntu i want to create a pppoe client with a service name. i used to create it with pppoeconf but it is not asking me for the service name. i went to /etc/ppp/peers then i typed gedit dsl-provider. i opened the file

[code]...

i put in the bottom servicename="ROG". when i pon dsl-provider it said unrecognized option servicename. i put in the header of the file this line : pty "/usr/sbin/pppoe -I wlan0 -T 80 -m 1452 -S ROG". nothing changed i still cant connect.

View 9 Replies View Related

Ubuntu :: How To Setup PPPoE Connection

Jan 20, 2011

I have this strange problem. I can't setup my PPPoE connection through the kPPPoE. My ISP told me that this PPPoE has something like name server or something like that and i must use some other package to connect.

View 3 Replies View Related

Ubuntu Networking :: Setup A PPPOE Connection On 10.04?

Apr 29, 2010

I've just done a fresh install of Ubuntu 10.04 lucid lynx and how to setup a pppoe connection in ubuntu. ( thats after 2 hours of googling and trial and error)

system info: its a laptop : Dell Studio XPS 16 connected to a Ethernet hub thats connected to a dsl modem..

View 6 Replies View Related

Ubuntu Networking :: Pppoe Connection Through Wan Miniport?

Jun 26, 2010

i am completely new to the world of Linux. But i want to learn it. My problem is , i cannot connect my PC to internet. I have a shared broadband connection which needs username and password to connect to internet. I don't know clearly but its something pppoe connection through wan mini port. or xdsl. I contacted my isp but in Our country (Bangladesh) a very few people use Linux or Ubuntu so they cant help me out. i searched many forums,, googled everywhere but cant make it working. i tried some command like "sudo pppoeconfig" but still dont understand. I know there are many people who know how to do this. My Pc configuration:

Processor: Intel Core2duo E8400 3.00GHz
Motherboard: Intel DG41TY
Ram: Transend 2GB 800 buss
Hdd: Samsung sata 400gb
Lan: Realtek PCie GBe family (built-in)
Ubuntu 9.10

I have Fedora 13 also. It looks almost similar to ubuntu at network connection.. is the settings will be the same.

View 1 Replies View Related

Ubuntu Networking :: DSL/pppoe Connection Script Fails?

Apr 18, 2010

i have setup my connection with pppoeconf command ...i had not started it at boot time..i make a script like this....

Code:
#!/bin/bash
echo "Connecting"

[code]....

View 1 Replies View Related

Ubuntu Networking :: Internet With A Pppoe DLS Connection Does Not Work

Jul 5, 2010

i have a routed and a PPPoE type internet connection, recently i tried a thing in terminal with the pppoeconf option since the network manager has problems with connectiong to the internet with a pppoe DLS connection, or anyway in my case it does not work. Ok i did the pppoeconf thing i inserted my pass and my user and left the program to do its thing, ok it all worked fine but then i restarted my system and suddenly the network manager did not want to recognize my network it hat as options some weird ipupdown options for connection and when i tried the pppoeconf thing again it did not work. what could i do to reactivate at least one way my connection, if i understood correctly the terminal type connecting and the network manager are two different things. now i am using my router and it should connect but the network manager still does not see the connection.

View 3 Replies View Related

Ubuntu :: Adding Routes To Dynamic Pppoe Connection?

Jul 22, 2011

Is it possible to add the routes to my routing table for dynamic pppoe connections? I have this setup on windows 7 with power-shell scripting and some 3rd party commercial pppoe client called Cfos, but since I'm now trying to move away from windows to Ubuntu and cant use the same programs anymore and its getting abit tricky now. I'm not trying to do any fancy load balancing here just some basic stuff which should be possible. Here is same basic info.

My ISP resets my pppoe connection every 24 hours. However the advantage of this is that I can call out 2 or more simultaneous PPPOE connections through the same modem. This is my routing table I wrote which has 5 PPPOE connections [URl]..Id like this to be automated when the PPPoes reconnect and the computer restarts.

View 2 Replies View Related

OpenSUSE Network :: How To Configure A Pppoe Connection

Jun 26, 2010

I would like to know how to configure a pppoe connexion? I am testing version 11.2 on live cd but I can't manage to connect my laptop. I used the "green plug software", I filled all the blanks (I am not a total beginner because I have been using Mandriva for a year) but afterwards I can't select pppoe instead of eth0 What should I do?

I read on this forum NET INSTALL PPPOE - Alionet, communaut francophone d'entraide openSUSE et SUSE Linux that the only reason that I can't configure a pppoe connexion is because I am using a live version of 11.2 as result that it only recognizes an ethernet connexion and a modem (everything I said, is said in the forum I linked, but you'll have to read it in french )

I try to configure a pppoe connexion to Tl2, my internet connexion provider. I live in France. My modem is a Bewan ADSL ethernet 100, no need to configure it.

View 2 Replies View Related

Networking :: Client Application For PPPoE Connection ?

Jul 14, 2010

What is the best client application for connecting through PPPoE (DSL connection)? Gnome's default network manager isn't very useful. I created a DSL connection but don't know how to use that.

View 1 Replies View Related

Networking :: Creating PPPoE Connection Using RHEL5

Apr 6, 2010

i need help to create a PPPoE Connection ( Breoadband)using RHEL 5 cz my ISP use this type of connection .Plz if there is someone can show me the procedure step by step.

View 3 Replies View Related

Networking :: How To Configure PPPOE Internet Connection?

Nov 15, 2010

I have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?

View 3 Replies View Related

Ubuntu Networking :: Autodial Pppoe Connection At Scheduled Time?

Jun 14, 2010

I've been trying to use gnome-schedule to create a scheduled task that would dial my pppoe connection automatically. For this I used "sudo pon" command (after configuring the pppoe connection using pppoeconf ). Although the command gets executed, but then it waits for me to enter the password. I want it to be automatic & shouldn't require me/anyone to authorize it. Is there a way to enter this password automatically for the scheduled tasks?

Also, I'd like to use network manager, instead of pppoeconf, for the same purpose. How can I set network manager to dial a pppoe connection at scheduled time?

View 1 Replies View Related

Ubuntu Networking :: How To Configure Pppoe With Advance Settings For WAN Connection

Mar 14, 2011

I have an internet connection which requires pppoe setup to login with the specified username and password ip address is dynamic.Above are the screenshots for your reference for which I establish the internet connection.the pppoe settings can be done through "sudo pppoeconf" but for the screenshot No. 2.what is the procedure? I need to specify the service name for my internet connection.how to configure my internet connection.

View 8 Replies View Related

Ubuntu Networking :: Can't Get Wired Internet Connection To Work Over PPPoE

May 1, 2011

I cant get my wired internet connection to work. The command 'dpkg -s pppoeconf' returns ' installed ok installed'. My connection is through a router which is probably in a semi-bridge mode and I need to dial a connection to get the net started. The connection Auto eth0 is setup properly with the correct cloned MAC Address (that of my laptop).

I've also executed 'sudo pppoeconf' and ran the whole series of steps which towards the end said that my connection will be set on boot. However, the net doesnt work directly and I dont know how to dial manually either. 'sudo ifup eth0' returns 'interface eth0 already configured'. I tried some 10-15 threads but none worked. Ubuntu is handicapped without internet.

View 2 Replies View Related

Debian :: Starting Pppoe Connection By Normal User

Mar 8, 2010

I am using a broadband internet connection. Currently I am using pon and poff commands to start and stop the internet connection respectively. But for these commands to execute I should switch to the root user. I want even a normal user to be able to start or stop the connection. How can I do this?

View 1 Replies View Related

Fedora Networking :: Make Pppoe (ADSL) Connection On 12?

Apr 11, 2010

how to make pppoe (ADSL) connection on fedora 12

View 2 Replies View Related

Fedora Networking :: How We Can Configure PPPOE Internet Connection?

Nov 15, 2010

I have wireless adapter USB rt1878 working fine.I have to setup pppoe to make internet connection?I need this help?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved