Fedora :: Cannot Boot 11 After Installing 12?
Nov 27, 2009
i install fedora 11 32 bit on my sdb2 parttion before install it i remove my 1st hard disk so its install on sda 2 as no other hardisk and boot partition on sda which now sdb what i did is i installed fedora 12 86-64 without removing my 1st hardisk its take it as sdb for boot and sdb 6 as root no problem i am facing is after installed fedora boot partition on same boot partition of fedora 11 fedora 11 bootpartiton formated ......now how can modify grub of fedora 12 to boot fedora 11 as well .that was my fedora 11 menulist
#boot=/dev/sda
default=0
timeout=5
[code]...
View 6 Replies
ADVERTISEMENT
Jun 2, 2011
I installed Fedora 15 with gnome3 on my netbook and after some slight trouble I got it installed Now heres the the bad news: grub doesn't show my Ubuntu installations(s), only Fedora 15 and windowz 7
View 5 Replies
View Related
Feb 7, 2009
When I boot up, my Laptop reports the operating systemis missing??? Unless, I put my XP installation disk in the drive, thenFedora will boot up fine.If I put the Live install Fedora disk in & choose to boot from the HD, again it reports the OS is missing??Clearly it isn't as here I am using Fedora after booting leaving myation disdrive.Incidentally, I don't have windows installed, Fedora only.
View 4 Replies
View Related
Jun 19, 2010
Having searched this and other forums and googled without valid results, I need some help. I've been a linux user since RH 5.2, having experimented with several distros but have not run into this problem previously. I've just installed F13 for the third time. Each time the installation completes without any apparent error but when I reboot, I get the following message:Quote:
Error No Active Partition
Intel UNDI, PXE-2.1 (build 082)
copyright ...
This product is covered by one or more of the following patents ...
Realtek PCI Express Gigabit Ethernet Controller Series v2.26 (090219)
PXE-E61: Media test failure, check cable
PXE-M06: Exiting PXE ROM
The cable failure is consistent with there being no cable and inability to configure wireless during install. I used the custom partitioning option during install and was very careful to search for any fields I might have missed initially.
[Code]...
View 4 Replies
View Related
Aug 7, 2011
I installed Zenity with yum and while it was installing it delete a lot of things.After an reboot Fedora hangs by the inlogscreen.I also tried to uninstall Zenity with system resque but no result.Does somebody knows how to upgrade my system again so that it boots normally again.
View 7 Replies
View Related
Feb 11, 2009
I just installed Fedora. I decided to duel boot and made sure to have it not touch my windows partition and install the bootloader. Now I can only boot into fedora which is lovely, but my windows is gone. Now I successfully mounted the ntfs partition windows was in, and the windows partition's fine and even the windows folder's still there but when I boot I only get the option for Fedora. Anyone knows how to fix it?
View 7 Replies
View Related
Aug 2, 2009
I installed fedora 11 yesterday, and didn't get time to do anything else. And the first thing I did today was to install the nVidia graphics drivers. But after I rebooted the loadings screen comes up (the one with 3 loading bars) and then it's just a black screen with a blinking _
View 4 Replies
View Related
Feb 21, 2010
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code:
BOOTMGR is missing.
Press CTRL + ALT + DEL to reboot.
[code]...
View 14 Replies
View Related
Jul 23, 2011
When I installed Guest Additions Fedora 14 will not boot anymore.
While booting I get the message:
View 1 Replies
View Related
Aug 6, 2011
I'm not able to boot into windows XP after having upgraded to Fedora 15 (from a linux magazine DVD). I just get a perennial flashing cursor with black screen. I have tried leaving it like this for a few minutes to see if anything is happening in the background, but to no avail.There were no issues at all with Fedora 14.The grub.conf file appears to have been modified only to pre-pend the fedora 15 boot option. I have changed nothing else in grub.conf or (windows for that matter).All the Fedora boot options work correctly.I have update everything using yum update.Having read a few posts I am still none the wiser. I append the grub.conf and the output of "fdisk -l". What is Fedora 15 version of grub doing differently, and what has it modified that disables the windows part of the bootloader?
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code]...
View 10 Replies
View Related
Jul 27, 2010
I just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
View 9 Replies
View Related
Aug 19, 2009
I have fedora 11. I installed debian on my computer and I have only the debian menu. I entered to debian menu.lst to add Fedora, i restart my computer and Fedora appears in the grub menu, but when I try to boot, it tells me that is there un notexisting system. So, I cannot boot Fedora. i have debian on sda6 and Fedora on sda8. My debian menu.lst is:
[code]...
View 14 Replies
View Related
Jan 16, 2009
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
View 9 Replies
View Related
Feb 8, 2010
i have installed fedora 12(from dvd) on my laptop having window 7 OS as deafult(intel processor i330)I wanted dual boot up, so I shrink the existing C partition using window using Disk Management. And then delete the newly created volume.Clean installation of fedora.But when I tried to boot window it is showing "No C drive exist".Although from linux all hardrive is coming as one file system and all data on Drive are intact i.e not data is lost.
View 5 Replies
View Related
Aug 12, 2011
I am new to linux and started using ubuntu and was so impressed with it that I decided to try out other distros as well. So, I installed fedora 15 into another partition and made ubuntu as default. Now fedora works fine but ubuntu doesnt.It gives error 13- unknown file system. What should I do to retain Ubuntu
View 3 Replies
View Related
May 9, 2009
I have been using for over a year now, my 64-bit computer first with Fedora 8 and now with Fedora 10 with 2Gb of RAM just fine. Today I purchased an extra 2Gb for the system and upon installation from the GRUB screen Fedora 10 simply won't boot. It does boot with 3Gb, and it doesn't matter which stick I use for the 3Gb configuration, or what slot do I put the sticks into the motherboard, however if I place the four sticks, F10 simply won't boot. Should I pass a command line argument tot he kernel? If so, which?
View 11 Replies
View Related
Sep 25, 2009
My hard disk is a 40 gb seagate drive with 3 logical partitions - C (Win 98), D (Data), E (Win XP Home). Yesterday, I decided to format Win 98 partition and install Fedora 11 on it. I used Live USB, custom partitioned for /, /boot and swap. Installation went fine until the Add/Delete boot screen came when I got multiple Unable to mount partition errors. Then I added Win XP (which was on sda6) and restarted the system. When the system booted, I selected Win XP but it didn't do anything. It showed blank screen and then reverted to grub boot loader screen. Then I selected Fedora time and completed installation and it works fine but XP doesn't boot.
Thinking something might have gone wrong, today I reinstalled Fedora. I chose "Install over previous Linux" and this time the installation went smoothly without any errors. However it still doesn't let me boot into Win XP. It gives a "Booting into WinXP in 3/2/1 seconds" and then goes blank and keeps repeating that message.
This is the result of fdisk -l code...
View 8 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
Jun 4, 2009
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
View 4 Replies
View Related
Aug 1, 2009
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies
View Related
Jul 13, 2010
I am running Fedora 13 in VMWare. I tried doing a software update and I get this error message when tring to install the updated kernel:
Test Transaction Errors: installing package kernel-PAE-2.6.33.6-147.fc13.i686 needs 6MB on the /boot filesystem
how to increase the memory space required for installation.
View 3 Replies
View Related
May 28, 2010
I recently replaced a failed graphics card w/ a GT 240. Next thing I know, Fedora 11 won't boot up properly. I guess it was a driver issue. I can tell you I went about fixing it all wrong because I wiped the FC11 partition (intending to install FC13) and now I can't boot anything up. My system consists of: sda1 vista, sdb1 XP, sdb5 extended, sdb6 Fedora. I thought grub was on the fedora partition, but reinstalling fedora with grub on that partition didn't fix the boot up problem. Do I need to replace the windows boot loader on sda1 with grub when installing fedora?
View 1 Replies
View Related
Jul 1, 2010
I tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies
View Related
Jun 9, 2009
So I had Windows Vista installed on my laptop(two 250gb HD). After trying to install fedora 10 with the Live CD, with some errors about root and boot, I ( don't really know why) tried the resize option and changed the second HD to 2 partitions. Put boot on the first. The installation was sucessful, i rebooted, but nothing happened. No windows vista, no fedora. So I tried to change by custom installing(installed fedora on first HD) and I guess I messed up a little. I want to boot again into Vista, but even editing grub menus failed. Any ideas on how to solve this?
fdisk -l
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4118425c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 30401 243995220 8e Linux LVM
[Code].....
View 1 Replies
View Related
Jun 6, 2010
I recently put Crunchbang Linux onto my sister's netbook. Everything went absolutely fine (except for the display driver, but that's neither here nor there), and everyone was happy. Then she decided to boot into Windows. The XP option appeared in Grub, she selected it, it showed the splash screen...and then flashed (so fast I can't even read a word) the BSOD before rebooting. Trying again brings up Windows' recovery screen, and the Safe Mode, Last Known Good, and Normal XP options all result in the same error. What's happening, and how should I fix it?
View 9 Replies
View Related
Jun 29, 2010
I've installed Ubuntu 10.04 on a friends NEC VERSA P7200, which had Windows XP.I set up two new partitions, sda3 (for /) and sda5 for swap.After installing 10.04, I rebooted to get "unknown filesystem", then grub rescue> prompt.After reading a ton of suggestions, and after typing insmod normal, normal, I get the Ubuntu splash screen with ability to boot into Ubuntu or windows.Rebooting gives the same error, then if I type insmod normal, normal, at the grub rescue> prompt it allows selection of ubuntu/windows/test memory etc.
View 9 Replies
View Related
Jul 3, 2010
I installed Ubuntu 10.04 yesterday and things were running smoothly.However, this morning I turn on my PC to boot up Windows Vista. Basically it said the system did not shut down properly and gave me 2 options to choose from.Neither of them worked.It would start to load then turn black and go back to the Grub screen. I can still boot Ubuntu it doesn't seem to want to boot vista.
View 3 Replies
View Related
Aug 30, 2010
I installed Ubuntu netbook version on my HP netbook Mini 110 with Windows 7. After installing Ubuntu the first boot up failed. It hangs with a black screen with a flashing text-mode cursor. After several attempts (just rebooting) it worked. However, about 95% of the time the machine fails to boot - after 3-4 seconds, and without showing anything on the screen (text or graphical), it hangs with a black screen with a flashing text-mode cursor. Pressing Ctrl-Alt-F7 (or any other keys) has no effect.
I also tried booting in recovery mode from the Grub menu I get at start-up. It failed too. The last few lines I get in recovery mode looks like : ata1: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata4: DUMMY
After this it get stuck there forever. Can someone help me out on this ? I'm a novice in this area.
View 1 Replies
View Related
Sep 14, 2010
I want to turn an old laptop (one that worked flawlessly with Ubuntu until the graphics card fried - it can still do VGA graphics though) into a server for files and perhaps, at some point, hosting my web site. I installed the latest 32-bit Ubuntu server edition from a USB drive, and the install went fine but I can't boot up my computer from the hard drive - I just get a blinking cursor, and no GRUB even if I hold shift while booting up.
If I boot from the USB, however, the installation works, even though I know that I installed it to the hard drive - once I have booted up, I can remove the USB drive and access everything on the hard drive and see that this is, indeed, where the server has been installed. I'm guessing that somehow, GRUB or something boot-related ended up on the USB drive, so that I can only boot the hard drive by telling the BIOS to boot from the USB, which then points everything towards the hdd. During the installation it asked me if I wanted to overwrite the master boot record, and I said yes (because the server will be the only OS on the computer) - do you think somehow this put the boot record on the USB drive?
I don't know that much about boot records, but since the server runs fine off the hard drive when I boot from the USB, I'm assuming the problem is boot related. Searched google and the forums for people with similar problems but couldn't find any. CD drive on my computer is broke so I can't install from a disc.
View 4 Replies
View Related
Oct 7, 2010
I initially had Win XP Service pack 2 installed on my system. Then i installed the desktop version of Ubuntu 10.04 (dual boot). All was fine until then. I could access both. Later on, i re-installed Win XP (excessive errors). After this I'm unable to boot into Ubuntu. The option that comes at the start 'Win Xp or Ubuntu' doesn't appear at all. System boots directly into XP.
But in the Administrative Tools > Disk Management option under Win XP, there is an unknown partition of 15.3 GB. So i'm guessing Ubuntu still exists on my hard drive. Any way to bring Ubuntu back from the dead other than a re-install?
View 3 Replies
View Related
