I installed Ubuntu 10.04 yesterday and things were running smoothly.However, this morning I turn on my PC to boot up Windows Vista. Basically it said the system did not shut down properly and gave me 2 options to choose from.Neither of them worked.It would start to load then turn black and go back to the Grub screen. I can still boot Ubuntu it doesn't seem to want to boot vista.
View 3 RepliesI've used Windows Vista and Windows XP for quite a while before I decided to swap XP for Ubuntu (mainly for the performance). After formatting the drive, where XP was, and installing Ubuntu 9.10 I've discovered that I can't boot into my Vista any more. I used to use a Windows 7 boot loader to switch between Vista and XP (I had Windows 7 installed before Windows Vista) and now it's gone.
I've tried to boot using the GRUB2 that Ubuntu 9.10 uses but I failed. At first it gave me a "no such partition" error whenever I tried to boot it, but after some changes I managed to get it to go in to some sort of a black screen. But it's as far as it goes.
I have also tried to repair the Windows boot with a recovery disc. Unfortunately I get a "The volume does not contain a recognised file system." error whenever I try to import the bcd.temp file using bcdedit.exe
I really need Vista back up since it has PhotoShop on it and all other things that I need in order to continue working on my schoolwork, which has to be done in a couple of days.
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code:
BOOTMGR is missing.
Press CTRL + ALT + DEL to reboot.
[code]...
I will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
View 7 Replies View RelatedI just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
View 9 Replies View RelatedI have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies View RelatedSo I had Windows Vista installed on my laptop(two 250gb HD). After trying to install fedora 10 with the Live CD, with some errors about root and boot, I ( don't really know why) tried the resize option and changed the second HD to 2 partitions. Put boot on the first. The installation was sucessful, i rebooted, but nothing happened. No windows vista, no fedora. So I tried to change by custom installing(installed fedora on first HD) and I guess I messed up a little. I want to boot again into Vista, but even editing grub menus failed. Any ideas on how to solve this?
fdisk -l
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4118425c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 30401 243995220 8e Linux LVM
[Code].....
I recently booted into linux from 9.10 and upgraded to 10.04. i was running a vista dual boot with 9.10 and everything worked fine. When linux asked where to install grub it said "if you dont know check all partitions "or something.so i did. i tried to boot back into windows and now it wont work, all i get is a blinking cursor.
View 9 Replies View RelatedAfter installing ubuntu 9.10 on external HDD I cannot boot vista if external usb is unplugged(where ubuntu is installed). it says grub loading and after that recover grub ( i think that is what is says ... not certain in this moment ) anyway hope you get my dilemma. If you need more information I'll be glad to provide it.
View 9 Replies View Related"Why on earth are you trying to install Vista?!" I know, I know, I'd install XP if I had a disc. My computer came with Vista and I accidentally deleted it when I installed Ubuntu. Now I'm trying to run Vista as a virtual machine with VirtualBox, but I'm having a bit of a problem. I'm running Lucid, everything should be up-to-date. I set up everything in VirtualBox, hit start, and booted up with the CD. That's where the problems begin. First screen reads:
[Code]....
I got this laptop today and decided to dual boot Linux, as I've been using it for a bit on an older laptop. I downloaded and installed Ubunutu 10.04, using the first install option to have it install next to Windows, and afterwards on startup I get 6 options: Whenever I try to boot with either of the Windows options, it goes to the Windows loading bar, then the screen goes black and the computer resets. I didn't make recovery disks. I already had Vista recovery disks and I did try that, but it said I wouldn't be able to restore the system with them. F11 on startup splashscreen does nothing.
View 9 Replies View RelatedHave just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
i had a working multi-boot system, vista on sda1,2; swap sda3; ext=sda4; ubuntu sda5; fedora sda6; data sda7 - i mount the data partition when using all of the linux releases so i don't have to have multiple copies of music, docs, etc. everything has worked fine until yesterday. i tried to install fc12 on sda6, replacing fc11. it required me to format sda6 as ext4. i wasn't sure where i had grub installed, but have a backup of menu.lst in data (sda7), so figured i could let it install to mbr or wherever it wanted to by default. when the install completed and i reboot, i get a black screen and these messages: CLIENT MAC ADDR: 00 19 XX XX XX GUID: XXXXX PXE-E53:
No boot filename received
PXE-M0F: Exiting Intel Boot Agent.
No bootable device -- insert boot disk and press any key I tried reinstalling fc12, same exact errors. I then thought maybe the problem had something to do with ext4 partition mixed in with ext3's, so i installed mepis on the sda6, and let it write grub to mbr (i think, not really sure where it wrote it). anyway, i still get the identical black screen. no grub type menu or anything. the screen used to show "DHCP for a few seconds", but doesn't anymore after i disconnected the ethernet cable.........
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies View RelatedI recently installed Ubuntu Studio on my PC, dual-booting it with Vista. Once the installation had finished, and I had rebooted, Grub showed the two Vista options:
Windows Vista (loader)
Windows Recovery Environment (loader)
When I load up "Windows Vista (loader)" it opens my Acer eRecovery Management, but when I load "Windows Recovery Environment (loader)" it opens what looks like a normal version of Vista. Is it possible that on installation, Grub accidentally swapped the two around, or have I probably mucked up my computer?
got a laptop of hp with amd neo m40 pro and 2gb ram.. with vista installed.the worst OS.... i want to install linux with dual boot since am not expert in linux.these are the specs:
hard disk is 250 gb
c-155gb , d which is for recovery is 10.6gb, e-46.8gb
and an unallocated disk of 20gb
tried to install fedora which couldnt recognize the hard disk partition got ubuntu and tried.. but i dont know where it got installed now my 20 gb unallocated disk is showing as two partitions one of which is 1 gb and the rest is 18gb. how to uninstall ubuntu now. i want to repartition it and install it in proper way is 20gb enough.
I installed VirtualBox, and I want to install Vista on it. I just have the copy of vista that came with my computer. I made the back up disks for it, and tried to use them to install it in the virtual box, but it said it was unable to install in that machine.
After that I looked in my windows partition and found the product ID for the vista copy. My question is: Can I download a copy of Vista and then use the product ID of my copy to make the installation in the VirtualBox? Are there any technical or legal reasons not to do this?
My smallest disc has the Vista loader and nothing else but I cannot select it for Dual Booting in the Ubuntu installation set up only for use as an entire disc which would delete the Vista Loader.
This is what I have:-
1st disc - no operating system much data
2nd Disc - empty except for Windows loader
3rd Disc - no operating system much stuff.
My original plan was to give Ubuntu all of the smaller second disc and I deleted everything ready to give it the entire hard disc. It was only when I went to install Ubuntu it I found the Vista loader lurking on disc 2 and the only option the install Ubuntu set up gave me for disc 2 was to use the entire disc (wiping out Vista loader) otherwise I could have installed Ubunbtu on another disc - which it reported as having no operating system.
If I put Ubuntu on disc 1 would I have a dual boot arrangement given that the installer saw no operating system on that disc ? Is there any (simple) way I can install Ubuntu on disc 2 and not loose the Vista loader? I am installing this version of Ubuntu as it was on the DVD that came with book "Beginning Ubntu Linux" It took me long time to Psych myself up to install it and when I did . . .
I am trying to install Fedora on my machine, Vista currently installed. During the install process, I select the partition which I created, but install program says I must define a ROOT partition. How do I do this?
View 6 Replies View RelatedI just spend 10 hours tryng to find a way to get my old grub working again after re-installing windows in an emergency, but it is not working...
View 3 Replies View RelatedI installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies View RelatedI wanted to install Ubunutu on my laptop and it currently has windows vista installed on it and installed using latest Wubi. I selected Ubuntu from dropdown menu after the system restarted. But when the sytem shows the username page to login the KEYBOARD and MOUSE are not responding.
I am using Lenovo Y series laptop and using the inbuilt keyboard/touchpad.
I had two OS in laptop windows vista and linux mint and when I used to start my computer I used to get different option for os like linux mint, linux mint memory check, windows vista etc.. but because of virus windows vista got crashed so I formatted disk drive C: which were containing windows vista and reinstalled fresh copy of vista.. but now when I start my computer vista start automatically, I do not see GRUB options to run windows os or linux mint..Is there a way to reinstall GRUB to get options like I used to get before formatting ?
View 1 Replies View Related