Ubuntu Installation :: No Boot After Installing 10.04
Jun 29, 2010
I've installed Ubuntu 10.04 on a friends NEC VERSA P7200, which had Windows XP.I set up two new partitions, sda3 (for /) and sda5 for swap.After installing 10.04, I rebooted to get "unknown filesystem", then grub rescue> prompt.After reading a ton of suggestions, and after typing insmod normal, normal, I get the Ubuntu splash screen with ability to boot into Ubuntu or windows.Rebooting gives the same error, then if I type insmod normal, normal, at the grub rescue> prompt it allows selection of ubuntu/windows/test memory etc.
View 9 Replies
ADVERTISEMENT
Jul 25, 2011
I installed Ubuntu 11.04 on my laptop that was running Windows 7. After installing Unbuntu I can no longer boot to Windows 7 or Ubuntu. The disk is now a dynamic disk which won't run with Windows 7 Home Premium. As this is a HP laptop computer, I had to do a recovery which wiped out everything.
View 2 Replies
View Related
Jan 18, 2010
I have a Dell Lattitude LS. It gets used for very light web browsing, RDP into my main PC and also to access Megasquirt in my car. It had until recently a stripped out XP install there that ran ok despite the laptop being a P3 500, 256mb RAM. That install is now damaged, it gets as far as the login screen and then hangs. Instead of repairing it, I want to put ubuntu on there as i think it'll manage the (lack of) resources better. However, the laptop has no optical drive, cannot boot from USB and I'm not sure if the external FDD. I have for it works either (it's a bit crusty).
I do have a pata > usb convertor to access the drive via my main PC though. Am just not sure what I can put on there to let me boot and then install. Is it plausible to make the HDD act like a LiveCD? Should I partition it, and copy the install ISO contents into one of the partitions, and go from there - but how do I make that bootable? I do have another laptop with a PATA HDD that does have a working optical drive. Could I begin the install on that, then pull the drive and swap it over at some point during the install - or is that a no go?
View 3 Replies
View Related
Aug 3, 2010
I dual boot WinXP SP3 and Win 7 64bit.
C - win xp D - win7 E- data F - data
Today I installed Ubuntu to C or win xp partition.
I can access the other partitions but when restarting I cannot see the boot loader. It directly boots to Ubuntu. My Win7 partition is still there , but I cannot boot into it.
View 9 Replies
View Related
Oct 18, 2010
I'm currently running Ubuntu 9.10 on my server and I want to install a new 10.04 from scratch in a second bootable partition to be able to boot it up and test the new version before putting it into production (without tampering with my old version). I have an empty partition on my drive already
View 2 Replies
View Related
Nov 5, 2010
My misses wanted XP putting back onto her laptop, which had Ubuntu 10.04 installed using the whole drive. So I created a partition for it, and install XP onto it, but now it now longer gives me the option to choose between Ubuntu or XP. I know I need to reinstall GRUB but I am not sure on how to do it. Can anybody give me a step by step guide on how to do this please?? The simplest the better because I am not too hot on Ubuntu, unfortunately.
View 3 Replies
View Related
Dec 25, 2010
I had win 7 installed, decided to install ubuntu on this desktop computer. I had a windows partition, and a few other partitions, one with a wubi install of windows that I never used, so I decided to delete it, while installing ubuntu 10.10. I had free unallocated space for installing ubuntu, which was contiguous to the partition of the wubi install of ubuntu, so I decided to merge them, I did all this in gparted while installing ubuntu 10.10, 2gb swap, then 15gb root and all that remained to home.
Everything worked out fine (of course I never touched the win7 partition). After reboot grub doesn't show win 7, so I thought I'll just add it to grub, followed a few tutorials on this forum, but nothing worked. Then I remembered that the partition which I deleted to merge with the ubuntu partition, was an Active partition, and soon found out that my win7 partition was not active! (this is probably because I installed win 7 while I had still win vista, so that active partition was where vista was).
So now a ~100mb apparently unallocated partition was the active partition (win 7 hidden boot partition?), and trying the Startup repair of win 7 cd doesn't work, tried bootrec /fixboot, successfully, but bootrec /rebuildbcd can't find any Windows installation, even after setting the win7 partition as active with DiskPart. This is almost entirely a windows problem, but I just wanted to have Ubuntu working alongside Windows (I use a lot adobe's sw, which runs sadly only on windows, otherwise I would use only ubuntu).
View 9 Replies
View Related
Apr 29, 2011
I just installed ubuntu 11.04 on a separate partition on my hard drive so i can have dual boot for window 7 and ubuntu. I have done this in the past with 10.10 and it use to work fine. But now after installing 11.04 I am not able to boot it. I have recorded a video of what happens. here is the link. http://www.......com/watch?v=oLr2LqS0cEQ
I have written my laptop spec in the description of the video.
View 5 Replies
View Related
Jun 22, 2011
i just installed Ubuntu 11.04 and i was enjoying it, but when i wanted to boot into windows 7 my computer just restarts by itself. I really don't know much about Ubuntu
View 8 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
May 2, 2010
I installed Lucid Lynx on a dual boot with a previously installed copy of Windows 7 and everything installed fine via Wubi...but now when I boot up and I get to my Boot Mgr and select Ubuntu I get the following message and can not get past a black screen stating -
Try (hd0,0) EXT2
I have tried to read what others have done to fix this but nothing has worked so far,Also I can still log into Windows 7 just fine, just no Linux...
View 2 Replies
View Related
Aug 6, 2010
I am getting a blank screen with a blinking cursor. Install gave message to the effect: can't find boot file. Now I can't boot with any version or even get a prompt.
View 1 Replies
View Related
Aug 11, 2010
I used unetbootin (on another machine) to put the ubuntu 10.04 minimal amd64 .iso onto a usb stick. I used it to install a minimal system on a new 64-bit laptop (dual booting with Windows 7). Now, when I turn on the machine I get my choice of OS. When I pick Ubuntu, I get a blinking cursor, the harddrive is accessed. Then the cursor disappears, the harddrive is quiet, and nothing else happens.
View 9 Replies
View Related
Sep 28, 2010
its pretty much my first install. I am duel booting with Vista. I followed the guidelines and made a partition for my Ubuntu install. Everything installed correctly, however, it tell you to activate drivers for my video card, then restart. After restart ubuntu will not boot, it just sits at the startup screen and does nothing, I waited like an hour just to make sure that it was not just installing more things. I have re-formatted my partition and am going to reinstall later. Oh, I installed 10.4.1.
View 4 Replies
View Related
Sep 30, 2010
After install of Ubuntu 10.04 I cant boot WIN7 from the Grub menu.
root@asus:~# fdisk -l
Disk /dev/sda: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcb5bd2b2
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3890 31245312 7 HPFS/NTFS
/dev/sda2 3890 3892 16154 ef EFI (FAT-12/16/32)
Disk /dev/sdb: 31.9 GB, 31914983424 bytes
255 heads, 63 sectors/track, 3880 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac5b
Device Boot Start End Blocks Id System
/dev/sdb1 1 3391 27230840+ c W95 FAT32 (LBA)
/dev/sdb2 3391 3881 3931137 5 Extended
/dev/sdb5 3391 3852 3701760 83 Linux
/dev/sdb6 3852 3881 228352 82 Linux swap / Solaris
View 3 Replies
View Related
Apr 3, 2011
I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 5 Replies
View Related
Feb 7, 2009
When I boot up, my Laptop reports the operating systemis missing??? Unless, I put my XP installation disk in the drive, thenFedora will boot up fine.If I put the Live install Fedora disk in & choose to boot from the HD, again it reports the OS is missing??Clearly it isn't as here I am using Fedora after booting leaving myation disdrive.Incidentally, I don't have windows installed, Fedora only.
View 4 Replies
View Related
Jun 19, 2010
Having searched this and other forums and googled without valid results, I need some help. I've been a linux user since RH 5.2, having experimented with several distros but have not run into this problem previously. I've just installed F13 for the third time. Each time the installation completes without any apparent error but when I reboot, I get the following message:Quote:
Error No Active Partition
Intel UNDI, PXE-2.1 (build 082)
copyright ...
This product is covered by one or more of the following patents ...
Realtek PCI Express Gigabit Ethernet Controller Series v2.26 (090219)
PXE-E61: Media test failure, check cable
PXE-M06: Exiting PXE ROM
The cable failure is consistent with there being no cable and inability to configure wireless during install. I used the custom partitioning option during install and was very careful to search for any fields I might have missed initially.
[Code]...
View 4 Replies
View Related
Jan 23, 2010
So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
View 4 Replies
View Related
Feb 9, 2010
I have a DOS/Linux dual-boot system. After recently replacing the original motherboard (an Elitegroup P6VEM3, of all things!) with a salvaged Dell D300 motherboard, I'm preparing to replace the Red Hat 8 currently installed with a Ubuntu live CD that I've had for some time (but that wouldn't work at all on the old motherboard, for some reason) I have a question about the "partitioner" stage of the installer: I don't know what to do with my 5 DOS volumes. My hard drive is partitioned as follows (from the partitioner's report when I select manual mode; annotations in parentheses):
/dev/sda
/dev/sda1 fat16 57MB 33MB (C:, "DOS")
/dev/sda5 fat16 106MB 33MB (D:, "STUFF")
/dev/sda6 fat16 633MB 121MB (E:, "APPLICATION")
[code]....
View 6 Replies
View Related
Feb 16, 2010
I'm currently dual-booting Vista and Win 7. Do I have to install Grub or can I continue to use the Windows boot loader?
View 5 Replies
View Related
Aug 27, 2010
I am not able to see the existing windows OS already installed when the machine is booting.When the machine boots up I see a blank screen and it boot directly into Ubuntu.Here is the results file I have collected by running the tool:Boot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
[code]....
View 1 Replies
View Related
Oct 18, 2010
I am user of ubuntu 10.10 beta version. I installed windows 7 on ubuntu but after that ubuntu doesnt boot up! Somebody please help me.I have ubuntu 10.10 live cd for 32 bit desktop edition.I want to rescue this problem.
View 2 Replies
View Related
Oct 21, 2010
My dell machine has the following: A raid 0 SAS config with Windows 7 installed in one partition, and ubuntu in the other partition. Then two seperate sata hdd. The raid drive is set as first boot, and Windows views it as disk 0 and boots just fine. When I installed ubuntu 10.04 on the second partition, it viewed the disk as sdc. And when booting off the raid drive,im not given a grub menu to choose ubuntu orwin 7,windows 7 boots all on its own.
View 9 Replies
View Related
Oct 30, 2010
I played a bit with partitions. I'm not an experienced Ubuntu user, neither I have solid understanding of partitioning. And I hardly remember exact actions that led to this problem. I remember that I saw a warning in GParted that said that the partition was out of bounds or something.. But I followed some solution that I found on ubuntuforums and used fdisk to fix that. So, after installation of Ubuntu I couldn't boot into WindowsXP (after choosing Windows entry in grub2 menu I see only blinking cursor on black screen). But what's more important that I can easily mount Windows partition from Ubuntu. Also I tried to boot from Windows repair console and used FIXBOOT command, and copied[url].... and [url].... files to no avail..Here is the summary of what I got now:
Code:
sudo fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders[code].....
View 8 Replies
View Related
Jan 20, 2011
I downloaded and installed the Ubuntu desktop edition and when I boot up I have the options to boot either Windows 7, or Ubuntu (so far so good), however, when I select Ubuntu I get a message saying that the following file is corrupt:
File: ubuntuwinbootwubildr.mbr
status: 0xc000000f
Info: The selected entry could not be loaded because the application is missing or corrupt.
Any thoughts on this? Would just re-installing it fix the problem?
View 2 Replies
View Related
Mar 18, 2011
I used to have Ubuntu 10.10 and Windows 7 RC on separate partitions and I could choose to boot into either. Today I installed Windows 7 Enterprise trial version over the Windows 7 RC partition, and lost the boot screen. Reboot goes to Windows automatically. How can I get the boot options back to launch Ubuntu?
View 4 Replies
View Related
Apr 25, 2011
I would like to install Edubuntu 10.10 on this ancient Toshiba with Windows XP on it. The situation is a little complicated since I have no stable internet connection (I can not download Edubuntu once more). Now I realised that the DVD-Drive is broken and I can not boot from DVD to install Edubuntu. I have, however, an external USB-Drive, but there is no Boot-Option from USB (Phoenix Bios V. 1.3). So now I figured different options:
I could update my PhoenixBios to have a USB-Boot-Support. But I don't know if that's possible, so I am asking for opinions.I sucessfully installed Ubuntu 10.10 with Wubi on the Laptop, but I wasn't able to install the packages for Edubuntu. Any time I put the DVD in my external USB-Drive and tried to mount with Synaptic I got the error message: "E: Could not mount CD-Rom". So I could install Ubuntu 10.10 with the CD, the Edubuntu-packages in addition with the DVD afterwards. Is there no way to install Edubuntu directly with Wubi?
View 6 Replies
View Related
Jun 1, 2011
Instructional post - medium difficulty. Installing on an older notebook (or other system) with no external bootable device available:No CD/DVD drive
No floppy
No boot to USB capability
No (usable) OS on HD
Solution went like this:Remove target HD from notebook.*
Disconnect HD from a desktop.**
[Code]...
View 2 Replies
View Related
Jun 16, 2011
I have a desktop Windows PC with three hard drives. Having successfully installed Ubuntu on a laptop I used the same CD image to boot Ubuntu on my desktop machine. All seemed well so I selected the option to install alongside the existing OS. I left the choice of drive as presented by the installer (it was the largest one) and asked for an 80G partition for Ubuntu. The installation went well but when the machine was restarted it just booted straight into Windows. No sign of the bootloader menu. I'm guessing the BIOS doesn't look at the drive where Ubuntu is installed, and the installer did not put the bootloader on the Windows boot drive. The Windows drive is too small to install Ubuntu there.How do I fix this so that I can dual boot, or alternatively how do I get rid of Ubuntu and reclaim the 80G for Windows?
View 3 Replies
View Related