Fedora Installation :: Lost Vista Boot After "installing" 10
Jun 9, 2009
So I had Windows Vista installed on my laptop(two 250gb HD). After trying to install fedora 10 with the Live CD, with some errors about root and boot, I ( don't really know why) tried the resize option and changed the second HD to 2 partitions. Put boot on the first. The installation was sucessful, i rebooted, but nothing happened. No windows vista, no fedora. So I tried to change by custom installing(installed fedora on first HD) and I guess I messed up a little. I want to boot again into Vista, but even editing grub menus failed. Any ideas on how to solve this?
fdisk -l
Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4118425c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 30401 243995220 8e Linux LVM
[Code].....
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code: BOOTMGR is missing. Press CTRL + ALT + DEL to reboot.
I will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
So i'm VERY new at this, i need fedora for this research i'm starting. I have a dell and vista was installed on it, then i installed fedora 10 like it said on the fedora site from a boot disc. Now i have fedora but i don't have vista nor access to the memory it took up. I tried to restore to start over but i can't, and i need vista back.
Normally i would restore from the 10 G partition dell sets up for recovery but i'm not able to get to it, and i don't have my vista discs they're back at school.
I just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
I have a 250Gb hd on my Vista machine that I allocated 130Gb to an Ubuntu partition. Recently I had to reformat my Vista partition and now I don't have the ability to access my Ubuntu partition. What should I do?
I have installed vista(Preloaded) and Ubuntu 10.10 in dual boot in my laptop. Now i want to get rid of vista, and want to have only Ubuntu, also i want to assign all space to Ubuntu. I have two query's
1. How could i cleanly uninstall Vista from my system? (I Used WUBI to install Ubuntu)
2. Can i install Vista in future? (As my Vista was preloaded, Vista didn't recognize the hard drive on which Ubuntu is installed)
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options: 1) Either to create a fourth primary partition 2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.
If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.
If other is there, click the edit button and change other to Windows Vista.
Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)
I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
I have been using Windows Vista since I bought my laptop. Due to the need to use another operating system, I decided to go for Fedora. I read a some installation guides and was told that dual-booting will allow me use both OS without problems.Last night, I created three partitions on the hard disk, one of them is the primary partition for my Vista OS. Then I went ahead to install Fedora on one of the other partitions. The Fedora worked fine. Subsequently, I wanted to check some stuffs using Vista, but the computer showed my some prompt that said that my BOOTMGR is missing. However, Fedora still boots and works perfectly.Please what should do? I didn't back up my documents before installing the Fedora. How do I go back to Vista without formatting my hard disk.
I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
I installed Ubuntu 10.04 yesterday and things were running smoothly.However, this morning I turn on my PC to boot up Windows Vista. Basically it said the system did not shut down properly and gave me 2 options to choose from.Neither of them worked.It would start to load then turn black and go back to the Grub screen. I can still boot Ubuntu it doesn't seem to want to boot vista.
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.
I have been trying out different Linux distros to dual boot with Windows Vista. First I tried Ubuntu and it worked fine. Then I tried Fedora 15 and it worked fine as well. Then I went back to Ubuntu but now I have decided to stick with Fedora. The first time I installed Fedora it gave me options for choosing default OS and other things, now I can't remember how I did that and can't figure out how to do that agian. How do I do that agian? I want it to automatically boot into Windows Vista. I am installing Fedora on a seperate hard drive.
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics **GB main vista partition 10GB recovery partition 2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
I've used Windows Vista and Windows XP for quite a while before I decided to swap XP for Ubuntu (mainly for the performance). After formatting the drive, where XP was, and installing Ubuntu 9.10 I've discovered that I can't boot into my Vista any more. I used to use a Windows 7 boot loader to switch between Vista and XP (I had Windows 7 installed before Windows Vista) and now it's gone.
I've tried to boot using the GRUB2 that Ubuntu 9.10 uses but I failed. At first it gave me a "no such partition" error whenever I tried to boot it, but after some changes I managed to get it to go in to some sort of a black screen. But it's as far as it goes.
I have also tried to repair the Windows boot with a recovery disc. Unfortunately I get a "The volume does not contain a recognised file system." error whenever I try to import the bcd.temp file using bcdedit.exe
I really need Vista back up since it has PhotoShop on it and all other things that I need in order to continue working on my schoolwork, which has to be done in a couple of days.
