I am new to linux and started using ubuntu and was so impressed with it that I decided to try out other distros as well. So, I installed fedora 15 into another partition and made ubuntu as default. Now fedora works fine but ubuntu doesnt.It gives error 13- unknown file system. What should I do to retain Ubuntu
View 3 Replies
recently i installed ubuntu 10.04 from a cd to my pendrive. it worked fine but i can boot only with my pen drive inserted. i visited two more threads in this forum with same topic but no answers worked for me(i have not tried any third party mbr repair softwares). i have to go through grub to access my recovery drive which is a part of my hdd.( i do not have any command prompt options in my windows recovery console which is in my hdd. i want to be able to use grub and linux but i dont want to insert my pen drive for every boot.
View 10 Replies View RelatedI just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
View 9 Replies View RelatedI have ubuntu 8.10 & Windows XP installed on my PC. I formatted the C: partition and installed a new fresh copy of Win XP. After that I was not able to login to ubuntu 8.10. It is clear that Win XP overwrote the MBR. I tried to re-install the boot loader (Grub) again by boot ubuntu 10.10 CD. Finally, I was able to boot both ubuntu version 8.10 and 10.10. However, I was not able to boot Win XP. There is an entry in grun menu of ubuntu 10.10 specific for WinXP, but when I press enter to boot Windows I get back to grub menu.
View 1 Replies View Relatedi have installed fedora 12(from dvd) on my laptop having window 7 OS as deafult(intel processor i330)I wanted dual boot up, so I shrink the existing C partition using window using Disk Management. And then delete the newly created volume.Clean installation of fedora.But when I tried to boot window it is showing "No C drive exist".Although from linux all hardrive is coming as one file system and all data on Drive are intact i.e not data is lost.
View 5 Replies View RelatedMy hard disk is a 40 gb seagate drive with 3 logical partitions - C (Win 98), D (Data), E (Win XP Home). Yesterday, I decided to format Win 98 partition and install Fedora 11 on it. I used Live USB, custom partitioned for /, /boot and swap. Installation went fine until the Add/Delete boot screen came when I got multiple Unable to mount partition errors. Then I added Win XP (which was on sda6) and restarted the system. When the system booted, I selected Win XP but it didn't do anything. It showed blank screen and then reverted to grub boot loader screen. Then I selected Fedora time and completed installation and it works fine but XP doesn't boot.
Thinking something might have gone wrong, today I reinstalled Fedora. I chose "Install over previous Linux" and this time the installation went smoothly without any errors. However it still doesn't let me boot into Win XP. It gives a "Booting into WinXP in 3/2/1 seconds" and then goes blank and keeps repeating that message.
This is the result of fdisk -l code...
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
I initially had Win XP Service pack 2 installed on my system. Then i installed the desktop version of Ubuntu 10.04 (dual boot). All was fine until then. I could access both. Later on, i re-installed Win XP (excessive errors). After this I'm unable to boot into Ubuntu. The option that comes at the start 'Win Xp or Ubuntu' doesn't appear at all. System boots directly into XP.
But in the Administrative Tools > Disk Management option under Win XP, there is an unknown partition of 15.3 GB. So i'm guessing Ubuntu still exists on my hard drive. Any way to bring Ubuntu back from the dead other than a re-install?
I have installed UEC and eucalyptus and all its packages on a single pc.there are the instruction on the site to do this..after successfully configuring all the setting when I reboot it hangs and remains in the same position.It showing error that eucalyptud-cc teminated with exit status 1 and retrying spawning etc.
View 6 Replies View RelatedI tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies View RelatedI installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
I am not getting GUI in after installtion RHEL 5.0
My Mother board: Mercury
Model no1845 gcm
Moniter :LG 15''
After installing from the LXDE live CD I am unable to login. I type in my username, and then my password, and then the prompt goes back to the username (in other words, nothing happens). I can however login via the virtual terminals.
Could this be an issue with the live cd? Or was it just a bad install?
I recently updated my software (on Fedora 13) and after the updates had finished installing, it said that the computer required a restart. I noticed that I could no longer type anything into the search bar on Firefox without an error message appearing. So I thought it best to restart the computer then. When restarting, the loading screens took much longer than usual. The guitar pick shape that fills with white was stalling around the top. (I know, I love my complete comprehension of the problem too.) I pressed escape, and was given this message on a black screen.
Welcome to Fedora
Press 'I' to enter interactive startup.
starting udev:udevd-work[517]: '/sbin/modprobe-b pci: v000014E4d0000170Csv00001028sd000001F1bc02sc00i00' unexpected exit with status 0x0009
[OK]
[OK]
setting hostname (my computers name):
This is as far as I can get. I press Esc again, and I see the completed fedora logo, but nothing else happens. I press Esc again, and I come back to the previous screen, and this time there are two of the above messages. My computer is fairly old (four years), so I understand if the hard drive is deteriorating. I would like to have use of my computer back, but at the very least I would like to recover some files that I have not backed up.
I installed Fedora 15 with gnome3 on my netbook and after some slight trouble I got it installed Now heres the the bad news: grub doesn't show my Ubuntu installations(s), only Fedora 15 and windowz 7
View 5 Replies View RelatedI currently dont have the cd/dvd of RHEL 5. But i need to install gcc. I have been searching all day but wasnt able to find any rpm that is related to RHEL5. I download the following file
gcc-3.0.4.tar.gz
and extracted it, Then i run the following command
[root@WAN-Admin gcc-3.0.4]# ./configure
Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /root/new/gcc-3.0.4 using "mt-frag"
/tmp/cNf11430/cNf11430.pos: line 7: cc: command not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.
Now i am really hanged as what to do now. I added rpmfusion as my yum repo, i searched rpmpbone.net for gcc file for RHEL5 but it seems its not there for this version.
[Code]....
i was using win xp sp2. i just installed red hat linux by making one of the windows drive as unpartitioned space . i kept windows as my default os .my linux is working properly , but when i goes to start windows , it shows error " windows unable to start , hal.dll file is missing or corrupt".so to solve this problem , i decided to repair windows , but when i isert win xp bootable cd , cd starts booting , after showing messege " setup is inspecting your hard ware " , black screen appears , nd nothing happens after that.what should i do ? i want keep linux as it is and also want to start my windows again . tell me how to repair windows . what should i do to boot win xp bootable cd properly.
View 12 Replies View RelatedI have been only using the free vmware server thus far for my virtualization I have recently installed Fedora 11 and am currently looking at using the XEN virtualization software. I am currently running and upgrade from F10 to Fedora 11 with the PAE kernel. Also I am using KDE 4 with kmod-nivida drivers. Now here is what I have done
To install Virtualization requirements I did the following: sudo yum groupinstall 'Virtualization'
I then also did: sudo yum install kvm qemu libvirt python-virtinst
I then installed xen:
sudo yum install xen*
Now, I read that i needed "kernel-xen" but it doesn't appear to exists a "yum list kernel*' only displays kernel packages and the kernel PAE pakages so I figured I don't need it I then started all the xen services and libvirtd service Opened virt-manager and added a new connection: hupervisor: Xen and connection: local
I get the following error: Unable to open connection to hypervisor URI 'xen:///': <class 'libvirt.libvirtError'> unable to connect to 'localhost:8000': Connection refused
None
I guess my question now is... what is the difference between the hypervisor: QEMU/KVM and XEN. Because I seem to be able to create a VM using this. My VM is an XP vm for work purposes to run some windows only software I would like to use XEN as I just have my mind set on it but I might just be ignorant and on the wrong track is there a how to guide for fedora 11 and xen? the fedora 7 guide i found needs the kernel-xen installed.
I have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies View RelatedI did everything and restarted my machine, everything seems to be ok. But when i type in my IP on the browser which is 10.0.11.25 which would be the localhost machine, i get this below:
Code:
ERROR The requested URL could not be retrieved
While trying to retrieve the URL: [URL] The following error was encountered:
* Connection to 10.0.11.25 Failed
The system returned:
(113) No route to host
The remote host or network may be down. Please try the request again.
I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies View RelatedI've Got one Problem with My Computer soon after success installation of when the boot-loader ask me to choose OS at CENTOS 5.4, multi boot boot-loader if i choose windows then computer tries to boot windows but fail and give the error message that there is a problem on reading the hard disk, But when i restart it and start with LINUX then computer start successful with no error message, now i do not know what to do cause i need to use Windows and all my programs are in windows..
View 1 Replies View Relatedi install fedora 11 32 bit on my sdb2 parttion before install it i remove my 1st hard disk so its install on sda 2 as no other hardisk and boot partition on sda which now sdb what i did is i installed fedora 12 86-64 without removing my 1st hardisk its take it as sdb for boot and sdb 6 as root no problem i am facing is after installed fedora boot partition on same boot partition of fedora 11 fedora 11 bootpartiton formated ......now how can modify grub of fedora 12 to boot fedora 11 as well .that was my fedora 11 menulist
#boot=/dev/sda
default=0
timeout=5
[code]...
When I boot up, my Laptop reports the operating systemis missing??? Unless, I put my XP installation disk in the drive, thenFedora will boot up fine.If I put the Live install Fedora disk in & choose to boot from the HD, again it reports the OS is missing??Clearly it isn't as here I am using Fedora after booting leaving myation disdrive.Incidentally, I don't have windows installed, Fedora only.
View 4 Replies View RelatedHaving searched this and other forums and googled without valid results, I need some help. I've been a linux user since RH 5.2, having experimented with several distros but have not run into this problem previously. I've just installed F13 for the third time. Each time the installation completes without any apparent error but when I reboot, I get the following message:Quote:
Error No Active Partition
Intel UNDI, PXE-2.1 (build 082)
copyright ...
This product is covered by one or more of the following patents ...
Realtek PCI Express Gigabit Ethernet Controller Series v2.26 (090219)
PXE-E61: Media test failure, check cable
PXE-M06: Exiting PXE ROM
The cable failure is consistent with there being no cable and inability to configure wireless during install. I used the custom partitioning option during install and was very careful to search for any fields I might have missed initially.
[Code]...
I installed Zenity with yum and while it was installing it delete a lot of things.After an reboot Fedora hangs by the inlogscreen.I also tried to uninstall Zenity with system resque but no result.Does somebody knows how to upgrade my system again so that it boots normally again.
View 7 Replies View RelatedI had Maverick installed and it was running nicely. I decided to upgrade to Natty Narwhal using the update manager. After doing that, Natty Narwhal wouldn't boot. I don't remember what the errors were. I decided to uninstall the wubi installation of Natty Narwhal and start over again. When I tried to install Natty Narwhal, I got the option to boot into Ubuntu, but when I did, I got the following errors:
Try (hd 0,0):NTFS5:no wubildr
Try (hd 0,1):NTFS5:no wubildr
Try (hd 0,2):NTFS5:no wubildr
Try (hd 0,3):invalid or null
Cannot Find GRLDR
Then it goes back to the boot screen. I'm trying to install with wubi on Windows 7. The upgrade must have messed something up, but you'd think it would be wiped out after uninstalling. Oh, yeah, I tried to install Linux Mint with mint4win and got similar errors. Anything I can do about this?
I just installed Fedora. I decided to duel boot and made sure to have it not touch my windows partition and install the bootloader. Now I can only boot into fedora which is lovely, but my windows is gone. Now I successfully mounted the ntfs partition windows was in, and the windows partition's fine and even the windows folder's still there but when I boot I only get the option for Fedora. Anyone knows how to fix it?
View 7 Replies View RelatedI installed fedora 11 yesterday, and didn't get time to do anything else. And the first thing I did today was to install the nVidia graphics drivers. But after I rebooted the loadings screen comes up (the one with 3 loading bars) and then it's just a black screen with a blinking _
View 4 Replies View RelatedI just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code:
BOOTMGR is missing.
Press CTRL + ALT + DEL to reboot.
[code]...
