I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Repliesi could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
View 3 Replies View RelatedDue to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
I boot it up using the live cd then try to install it to my hard drive. I want to dual boot Vista and Fedora, so I've created another partition.However I'm having trouble whilst installing. When I get to the stage to select where I want to install it I choose the "Custom" choice. It is then also obvious what partition to choose as one is much smaller. But no matter what options I pick for it, it brings up an error. >_<
I know this is probably a terrible and confusing explanation, but I'm a huge newb to linux and especially fedora.If you want a better explanation please ask and I will try to deliver.
Been a while since I've been on here, but I was using Fedora 12 for the longest time and only recently started having problems. I kept getting errors and pop-up dialogs telling me to run yum-complete-transaction, which I tried as root many times. It would then give an error that it couldn't locate the repository and such. So, I looked through all my yum config files and changed a few things until I FINALLY got the command to do something, only it did all kinds of strange things as I was running low on EXT3 disk space and using old Windows' partition to store a lot of things on.
Now, I backed up all the /home directories and files as well as /root, just in case this didn't go smoothly and I still ran out of disk space. If I had the money, I'd buy a storage stick and just back up everything, but that's not an option at the moment. Now I have a crippled version of XP (pretty much useless from a trojan, even though I had McAfee AND Windows Defender running), and half of Fedora 12 with 2 different boot images! When I first did this, I used a 10G partition to install Fedora, which was plenty then. What's left of Win still resides on about 65G of space, but I have a lot of files there I want to keep. Fisrst thing I want to know is, should I look anywhere else on the Fedora disk to find files I may need, just in general? There's still a LITTLE space on the drive to back up stuff if I need to.
Second, while I still had enough to work with, I managed to download and burn a F14 Live CD, which is running now. I saw the option on the desktop to install it, and can get my config files and such from the backups if need be. I do NOT have a DVD burner, so if I have to I can use regular 700MB CDs, but only if they are available.The next thing I need to know is if I can install F14 from the web, without having to download any more ISOs, (again, assuming they are available). I know all my DSL settings so that's not a problem, I just need to find out if I can install it that way before I go clicking that icon. Anyone with experience with this would be helpful. I'm ready (MORE than ready) to go through with it, I just don't want to get "stuck" once I start the process. My download rate is around 200k/sec, so it's going to take some time no matter which way I (can) go.
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
View 2 Replies View RelatedRecently I reinstall Grub, but I have chosen on ntfs (windows 7 partition E: drive). After this I chosen /dev/sda which is correct boot partition.
Now Fedora 10 and Win 7 booth are working properly.
How can I get back my E: drive safely?
In Fedora 10 E: is not available, where as in Win7 it is available but asking for Format.
how to get back my E: partition which was chosen wrongly as boot partition.
I have a Toshiba F30-114 laptop on which I want to have a dual boot Windows XP/xubuntu configuration.The problem is that when I install Xubuntu as dual boot, Windows XP gives a blue screen of death for a second and then reboots in the begining of the windows boot sequence.I can choose Safe Mode, Safe Mode With Networking, Safe Mode With Command Prompt, Boot With Last Good Configuration, and Start Windows Normally. But nomatter which one I choose it will result in a bsod following a reboot.I tried to remove the Xubuntu partition, which somehow also resulted in removing the XP installation. I then put the harddrive in an external case and used EASEUS Partition Recovery 5.0.1 on another machine which got back the Windows partition. Now Windows works again without any bsod.
View 2 Replies View RelatedI have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
I want to boot the 'Finnix' distro from a usb. I have unetbootin which can set it up on the usb, but it can't allow me to preserve files after rebooting. Is there anyway to do this, maybe do it manually or use another software to install it on the usb?
For ubuntu there is no problem getting files to be preserved after reboots..
I recently bought a new Samsung netbook N310 and want to install dual-boot Debian lenny along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz which architectures and kernels I should download from the cd installation? there are so many:alpha, amd64, armel, hppa, i386, ia64, mips, mipsel, powerpc, s390, and sparc.
View 4 Replies View RelatedI already know what the problem is, which is that I have an AGP Nvidia graphic card. When I try to boot the live cd it freezes. I've done some research and I've already tried using "nouveau.noagp=1" as a Boot Option from the live cd. But it says unknown boot option ignoring. And it still fails to boot up. Im anxious to begin using Fedora.
When it is trying to boot...it also says IO APIC resources could not be allocated.
I get it to boot to the loading screen and it gets to what looks like 99% loaded and it just sticks, i have tried multiple downloads, different cds and did "verify and boot" just to be sure and it just sticks and does nothing?
Just read up that it's an issue for a lot of others as well, so i'm downloading the dvd to do a straight install from
I'm trying to install using live USB stick. The F15 live CD was downloaded and copied to the USB stick via liveusb-creator. The target machine has Award BIOS v6.00PG, I set the first boot device to USB-HDD. When I tried to boot it from the machine, I get the following error:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
[code].....
I'm trying to install F11 in my new laptop [URL] and I'm unfortunately about to give up, but I want to give this option. What I want to do is use the live cd (on a usb stick) to boot on a text-only session. Supposedly the way to do that is type "linux text" on the boot prompt but the problem is that I can't even get there. After booting I get the grub menu with two options: boot, and verify and boot. Hitting esc doesn't bring me to the boot prompt. I can get to the grub menu, but I'm not sure what to do from there. And I can edit the boot and kernel options, but I'm not sure whether that will allow me to log in a text-only session.
View 4 Replies View RelatedI currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies View RelatedIt looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View Relatedi have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
View 1 Replies View RelatedI'm making life difficult for myself. Summary, I have a laptop with F10 installed on a portable harddrive (sdb 1-3, i.e., no logical volume) Works great, no complaints so I guess this reduces to a grub question; how do I edit grub.conf to boot an iso on sdb4? Fedora10.iso for example.
View 1 Replies View RelatedYesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies View RelatedI was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
I want to dual boot Fedora 11 and Windows Vista, and the last time I tried I deleted my Windows Vista (big no no). So, I've made a partition of about 30GB, and I'm trying to go through the installation (from the live CD), but I don't know quite what to do? If I select Shrink existing disk, it doesn't let me do it for any amount that I put in, by the way.
View 14 Replies View RelatedI bought this netbook yesterday & thought of installing ubuntu netbook 10.10 on it.
I booted with windows & started the install using WUBI.
The wubi setup was started but then after copying files it told that some error occurred.
I though that I will deal with it later and left the wubi installed.
Now, when I rebooted after sometime, I am thrown to the code...
My netbook also has Hyperspace installed that comes with netbook. I provided that in case it is caused because of that.
Now what do I do? I didnt do anything wrong and still ubuntu messed up my system
I recently bought a new Samsung netbook N310 and want to install dual-boot Ubuntu 10 along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz
Which architectures and kernels I should download from the cd installation? any experience with this kind of dual boot installation?
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
Well Fedora 14 sees my Emu soundcard right out of the gate with the live cd! I have windows 7 installed right now. I would like to install Fedora 14 from the live cd to have a duel boot setup. What I am trying to do is just give Fedora 60GB of the drive and keep the rest for Winows. How can I go about this with the live cd. I am sure it's been covered to death but I couldn't really find it.
View 14 Replies View Related[URL] I'm currently running simplyMEPIS 8.0.15 (rel 32). It's booting automatically off a USB. The way I have it configured right now, it just loads right up without a root menu or boot-options, just basically going straight to "hey, u ROOT or DEMO?" I'm not sure if there's a way to get back to the bash and load directly to RAM at this point.
In another thread I was looking into burning backups from k3b as I run live because my DVD-player isn't behaving right now under windows... 'still working on that I want to get a backup done before I do a hard install. It's my goal to get either Kismet, wireshark, or Airsnort/crack/peek running on this machine so I can start gathering packets and doing analysis. Is that a way that (atleast for the timebeing until I can work out backups) that I can install any of these programs directly to the USB (by editing the ISO somehow?), so that they'll be available when I liveboot?
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.