General :: Installing Fedora - Media Test Failure Exiting Intel Boot Agent
Jul 1, 2010
I tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies
ADVERTISEMENT
Aug 25, 2010
Dell Mini 9 Netbook with Windows XP OS died. It has a 16GB SSD. I was in the middle of installing HP printer software when it shutdown unexpectedly. Then upon turning it back on it says something about a media test failure, check cable and then Operating System Not Found. I've been able to boot using Damn Small Linux using an external cd drive.
When I type 'fdisk -l' I get:
Disk /dev/hda: 15.4 GB, 15408046080 bytes
255 heads, 63 sectors/track, 1873 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/hda doesn't contain a valid partition table
My wife has lots of pictures on the drive that she would like so I took it to a couple data recovery places and they were charging anywhere from $1000 just for jpegs up to $2600 for all files retrieved. That's more than I can budget for this. So my wife accepted the fact that the pictures are gone, but I figured I might as well try what I can because we have nothing more to lose.
I thought I'd try to get a hard drive cubby and attach it through USB to a working PC, but apparently Dell's SSDs are proprietary and the design is not accommodated. I thought maybe just the partition table information got erased somehow, so I tried using gparted and it found nothing. Whenever I use cfdisk and create partitions, I quit cfdisk after writing and it still says there is no valid partition table. I have no other ideas as to what I can do.
View 1 Replies
View Related
Aug 23, 2010
I downloaded Ubuntu 10.4 netbook edition for my toshiba satellite a105 laptop (windows XP) burned it to a CD, restarted my computer with the disc in drive, pressed f12 at the appropriate time, chose to boot from CD. after sitting for a second i get error PXE-e61 media test failure, check cable. and then it boots XP normally. how do i get around this to install linux!
View 4 Replies
View Related
Mar 25, 2009
Just to reiterate on the title, the installation of Fedora 10 i386 (DVD) on a 32bit PC. Is failing on me after the media check (whether or not I do it), so not even making it to the language selection. Currently running a nvidia AGP video card was previously using an ati PCI card but swapping has done little to help.
The only argument that lets me passed this point is noprobe, which then fails a bit later as it can't pick up the install media. I've also tried a live CD which seems to be a bit hit and miss as to whether or not it even loads. It then either fails to even let me run the install to HDD or it comes up some error about failures in python code (Don't have the exact error as the last few times haven't even booted). Below is a couple of errors I get from the standard installer
[Code].....
View 8 Replies
View Related
Jan 21, 2011
I tried so many times to configure vlc on fedora 11 . But all are failed things that tried are listed below:
Yum install vlc error-> no package found
Downloaded rpm for vlc and try to install but dependency errors
Downloaded mplyer and try to compile but ended with errors, compile with various combinations of parameters but errors are still there.
View 1 Replies
View Related
Sep 1, 2011
I have a dual boot system (Compaq Presario CQ61) with Windows 7 and Ubuntu installed. A while back I updated my Ubuntu system to the 11.04. All went smoothly. Then recently, when the system prompted me, I installed some updates. Since then when I try to boot into Ubuntu I end up at a CLI with (initramfs) as the prompt.I can still successfully boot off of the Windows 7 partition.After reading a lot of articles describing similar problems, and failing to find a fix, I reinstalled 11.04.The system came up without any problems. BUT then, as usual, the system prompted me to install updates. Once I was done installing them and rebooted the computer I was back at the (initramfs) prompt.
View 1 Replies
View Related
May 10, 2010
I tried to intall DEBIAN on a P6 machine(Power 570 processor)'s LPAR. Using debian-504-powerpc-DVD-1.iso from http://cdimage.debian.org/debian-cd/5.0 ... c/iso-dvd/I used "install64" option and it completed normally. All using default/recommended options during the installation. i.e. whole disk, one filesystem, etc.However, after the installation(seemed succesful), I got the following error during reboot."root=/dev/sda2:2,/vmlinux: Unable to open file, Invalid device"
View 1 Replies
View Related
Feb 13, 2010
I'm running Debian Testing (up-to-date) with no difficulties.I'd like to find a way to test/validate DVD+RW media to ensure that I will get error-free off-the-air recordings in a separate DVD recorder.I've only been able to find Windows-based Nero or Plextor utilities discussed on the DVD enthusiast web sites. If possible, I'd like to evaluate the media on my Debian box.
Currently using XFBurn, which doesn't seem to be the answer. FWIW, the DVD hardware is a Hitachi/LG burner. Using lshw, I get description: DVD-RAM writer, product: DVD+-RW GH30N, vendor: HL-DT-ST,... version: A102, capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram, configuration: ansiversion=5 status=ready
View 13 Replies
View Related
Nov 15, 2013
Python's test case to test uniqueness of uuid.uuid1() in test_uuid.py is failing on wheezy on Virtualbox. However, when I change it to use uuid.uuid4(), it's successful always. I don't have wheezy installed on a bare machine to test.I faced this problem when installing Python 2.7.6 on my virtualbox. This is blocking a successful installation.
Below is a test file I created:
Code: Select allimport uuid
def test_uuid():
uuids = {}
for u in [uuid.uuid1() for i in range(1000)]:
[code]....
View 0 Replies
View Related
Apr 7, 2010
I just got a new desktop PC with Intel i5 650 Dual Core 3.2GHz 4M Turbo. I would load up the installation cd, once I selected to install the screen would go blank and nothing happens. Centos 5.4 work, but I just want Fedora 12 installed.
View 5 Replies
View Related
Mar 16, 2010
Whenever I try to install vlc I get a ton of errors shown below. I can't seem to figure out how to fix this, but vlc will not play my media files after installing. Any ideas?
Code:
[Jake@Jake ~]$ sudo yum install vlc
Loaded plugins: fastestmirror, presto, refresh-packagekit
Loading mirror speeds from cached hostfile
* fedora: mirror.us.as6453.net
[Code]...
View 1 Replies
View Related
Jul 30, 2009
I am using openSuse10.3 GNOME. While I am trying to install VLC player I am getting lot of errors like libmpeg2 not found, wxWidgets not found, postproc not found and also some errors like FRIBIDI. For the last two weeks I am trying to install all the versions of VLC player like vlc 0.8.6b, vlc0.9.8a, vlc1.0. But installation was not successful.
View 2 Replies
View Related
Aug 28, 2010
I am looking for a assembler, in my college there is a ia32build assembler. I have tried searching it in Google, but I can't find it. I have x86 processor and I want to install it in Ubuntu 10.4.
Edit 1 : I am not sure about the assembler name but we assemble it by ia32build command.
Edit 2 : The syntax is quite different from nasm. Here's my sample code.
.intel_syntax noprefix
.text
msg: .asciz "Hello World !"[code].....
View 2 Replies
View Related
Jan 4, 2010
i recently installed vlc media player 0.8.6 in yellow dog linux 6.2 on my ps3 by following this procedure..[url]... i then used the firefox add-on mediaplayerconnectivity (0.9.2) to link video files for quick time, real video, flash (flv)etc... to vlc as the default player for these video formats. (note: i had to manually add vlc as the flv default player, b/c mediaplayerconnectivity did not automatically do this.)
now...on videos when i double-click on the little movie film icon to play the streaming file through vcl the player opens, but neither the video or audio play even though i have vlc setup as the default player. i have tried playing some quick time (mov) and windows media video (wmv) streaming video and they work fine. i noticed that there's a new update (0.9.5) for vlc. do i need that update to make sure videos (flv files) video will play? if so, how do i install the 0.9.5 update after downloading it in yellow dog linux 6.2?
View 4 Replies
View Related
Dec 30, 2009
I am trying to install the intel compiler onto my 64 bit machine to compile fortran and I cannot get past this error.
When I run the install package it looks for the neccesary pre requisites tell me that I need
I was trying to follow this guide [url] and the only library that installed correctly was the last one, the 64 bit one.
When i type yum install (one of the above libraries) it comes back and says that it is already present which cannot be correct since the install program asks for them.
View 1 Replies
View Related
Apr 8, 2009
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
View 1 Replies
View Related
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
View Related
Mar 26, 2011
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies
View Related
Jan 13, 2011
Ive been at this for two days now, and cant make any progress.
First, the details:
Target Machine:
IBM (e)server, xSeries 306
OS: Fedora 4
Boot Order:
1. CD...
2. Removable Media
3. SATA...
USB Drive:
adata 8GB
Process:
I used the prescribed live usb creator for windows to fill the usb drive. Ive attempted to boot from the USB at least 4 times, once from each USB port on the box. No luck.There isnt an option in the BIOS to select the specific boot device. I bring that up because my desktop does have that option, and using the BIOS BOOT MENU, I was able to boot from the USB and bring up the Fedora 14 Installation Menu, no problem.
So, it works on the pc thats on my desk (eMachine w/XP), but the IBM doesnt even recognize it.
View 2 Replies
View Related
Oct 5, 2014
I've recently put a new machine together:
Gigabyte GA-B85N Motherboard with Intel HD4600 Graphics / Intel Core i5 4440 CPU
OS: Debian GNU/Linux 7 (wheezy) / Linux msc001 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
I've installed KDE and when I go standby everything seems ok, but when I resume the monitor does not respond (the power indicator is flashing so there is no signal being presented thru the HDMI cable). Note that the system is still running as I can Alt-F2 (quick task/find), select Terminal and enter sudo-reboot without the screen. So it is just the hdmi signal that is not being recreated/refreshed properly.
I've included the suspend log (/var/log/pm-suspend.log):
Code: Select allInitial commandline parameters:
Sat Oct 4 13:22:54 BST 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:
/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
[Code] .....
View 10 Replies
View Related
Apr 15, 2009
i've enabled quotas for a user on my fedora 10 distro but whenever i reboot the machine the boot.log contains the following message :"Enabling local filesystem after every startup i have to login as root and issue the quotaon -auv command to reenable quotas.what causes this failure on startup ? is there a workaround to solve this problem ?there is plenty of free space on the root partition that quotas are enabled.
View 2 Replies
View Related
Jun 26, 2010
I had occasion to add a few lines to rc.sysinit. Turns out the lines syntax was wrong. Instead of the booting ignoring those lines and proceeding on, then giving me an error warning or perhaps dumping into the interactive mode it just hung up! After several tries at moving on I discovered ESC dropped me into some sort of unannounced shell I got the installation disk out and with the repair system option using VI I got the lines deleted and all went back to normal. Now my suggestion is that if something does not make sense in terms of syntax while booting then cover it by doing the above and ignoring it with a warning later.
View 14 Replies
View Related
Aug 10, 2010
I was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
View 10 Replies
View Related
Dec 7, 2010
I have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
View 14 Replies
View Related
Aug 12, 2011
I am new to linux and started using ubuntu and was so impressed with it that I decided to try out other distros as well. So, I installed fedora 15 into another partition and made ubuntu as default. Now fedora works fine but ubuntu doesnt.It gives error 13- unknown file system. What should I do to retain Ubuntu
View 3 Replies
View Related
Jan 6, 2010
I have a box running Lenny and boot with lilo. Today there was a power failure and now the system is stuck on Lilo ..It doesnt get passed that. I tried to boot in single mode but the same thing is happens. How can I fix this problem
View 3 Replies
View Related
Apr 7, 2010
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies
View Related
Aug 26, 2010
Every time I boot up FC13 I get a boot message which is showing a failed task. The line is as follows:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1174 Segmentation fault "$@"[FAILED]
Everything appears to be running fine on my system. This message is more nuisance that a functionality message. But I could be wrong.
View 8 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Aug 21, 2011
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
View 5 Replies
View Related
