Ubuntu :: Fails To Boot After Installing?
Aug 30, 2010
I installed Ubuntu netbook version on my HP netbook Mini 110 with Windows 7. After installing Ubuntu the first boot up failed. It hangs with a black screen with a flashing text-mode cursor. After several attempts (just rebooting) it worked. However, about 95% of the time the machine fails to boot - after 3-4 seconds, and without showing anything on the screen (text or graphical), it hangs with a black screen with a flashing text-mode cursor. Pressing Ctrl-Alt-F7 (or any other keys) has no effect.
I also tried booting in recovery mode from the Grub menu I get at start-up. It failed too. The last few lines I get in recovery mode looks like : ata1: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xfe(some numbers)
ata4: DUMMY
After this it get stuck there forever. Can someone help me out on this ? I'm a novice in this area.
View 1 Replies
ADVERTISEMENT
Nov 26, 2015
I have a ~ 2008 notebook (Compaq CQ60-137EL) on which I had Windows 7 only (it was sold with Windows Vista installed).
Later I installed Debian Jessie 8.2.0 Stable ("Graphical expert install" from DVD), along with GRUB as a boot manager (I chose not to install it on the EFI removable media path).
Since then, if I select Windows 7 on the GRUB boot screen, I see "Starting Windows...", and after few seconds the screen flashes for a moment, and then the PC reboots: I see the bios screen, followed by the GRUB screen again.
What's even more weird about this is the fact it just happens only in like ~50% of the cases. In the other 50%, Win7 starts flawlessy.
I even tried to install Debian first, then Windows 7, then re-install GRUB, but I got the same issue, even with both system freshly installed.
On 6 attempts, 3 times it worked and 3 times it didn't.
On my desktop PC I'm in the same setting, but I don't have this issue. I think it may be related with the fact I have Win7 on a SSD and I installed Debian on a separate HDD, while on my notebook, as you can imagine, there's just one single HDD.
View 11 Replies
View Related
Dec 6, 2010
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies
View Related
May 3, 2010
I was upgrading our lab's dhcp server to Lucid and it totally died. I have it running on a Debian recovery cd right now. I ran into a bug in gtk which I seem to have fixed, but now I have more serious errors. If I boot without a CD, I get dumped into a busybox shell after the machine fails to boot. From the live CD, I tried dist-upgrading again and it dies trying to build and install rsyslog with a broken pipe error. I am at a loss as to what to do from here short of reinstalling (which is the last option as this server has a lot of custom configs on it)
View 6 Replies
View Related
Jul 17, 2010
I don't have much experience working with Ubuntu servers, but I recently decided to try to set one up. I have a remote server hosted with a static ip address, but I can't seem to install apache.
When I run the command
Code:
It fails to install with because it is missing dependencies.
"apt-get install -f" doesn't help. How can I install the necessary dependencies to get this working?
View 3 Replies
View Related
Jan 22, 2010
My Internet connection works fine when I boot Ubuntu with the CD and it does not work when I boot from the Hard Drive. It was working then it stopped. I tried to diagnose the problem but I am not familiar with Linux.
I opened a Terminal window and entered ipconfig (don't laugh ... sadly, i've been in Windows for too long) ipconfig was something that could not be found in my terminal window so i exited.
Next it was System->Administration->Network Tools. I ping'd www.yahoo.com and it said it could not find it. hmmmm. Let's see if restarting the system will fix it.
I did a shutdown and when it came back up; same problem. Ok, i really didn't think it would magically correct itself; this is Linux after all. Windows? Well sometimes you can fix things by turning them off and on. Next, another shutdown and I rebooted with the CD instead of the Hard drive and here I sit entering this help question in.
I am guessing that a file or setting got changed in /etc/someplace and I am not even sure of that. Can anyone point me in the correct direction? I am assuming that there is a setting which is correct in the CD version that is not not correct in the HD version and somehow i need to find what it is and synchronize it with the CD version.
View 1 Replies
View Related
May 8, 2011
I downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
View 3 Replies
View Related
May 22, 2010
I got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
View 9 Replies
View Related
Jan 6, 2011
When trying to compile the webcamstudio modulae (ws4gl.org) it doesn't give an error, but when I want to modprobe it....
Code:
This is from dmesg:
Code:
View 1 Replies
View Related
May 27, 2011
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
View 14 Replies
View Related
Jul 7, 2011
I am trying to install the dropbox-api onto my suse 11.4 but i keep getting this error:
Can't locate DateTime.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.12.3 /usr/lib/perl5/vendor_perl/5.12.3/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.12.3 /usr/lib/perl5/5.12.3/i586-linux-
[code]....
View 1 Replies
View Related
Feb 8, 2011
I'm trying to install a package which is failing these dependencies:
[code]...
I downloaded Gnome2-GConf-1.044.tar.gz and I installed it, but I still the package fails the dependencies, even Gnome2::Gconf. What I can do?
View 3 Replies
View Related
Aug 6, 2014
I'm just trying to install a Jessie i386 image in Oracle Virtualbox.
My host specs are:
Windows 7 Home Premium x64
Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.
When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..
View 4 Replies
View Related
Feb 28, 2011
I have tried re-installing system-config-network.
root@localhost:/home/kbriggs> system-config-network
Traceback (most recent call last):
File "/usr/sbin/system-config-network-gui", line 48, in <module>
gettext.bind_textdomain_codeset(PROGNAME,locale.nl _langinfo(locale.CODESET))
AttributeError: 'module' object has no attribute 'nl_langinfo'
View 10 Replies
View Related
Jul 1, 2010
I'm installing openSUSE 11.2 on a notebook from DVD + locally mirrored update and kde4 buildservice repositories. This usually worked fine, but this time, the installation always fails at about 89% while installing some package, whose name I can't find out. Its script fails with error 127, the error message blocks access to the log.
Is there a way to continue the installation process afterwards, instead of always trying to reinstall and hoping to find out the name of the failing package?
View 3 Replies
View Related
May 22, 2011
I m try to explain the structure I tried to use here:Symptoms: Describes what is happening right now What happened: Describes the history leading to the problem My tries so far: Describes, what I did (so far in vain) to clean up the problem Questions: I already searched the forum (see "My tries so far") but missed to write down the URLs for the threads. (So they aren't mentioned under "My tries so far")
Symptoms: The system boots up ok, I get to the KDE login, but for both my user account and the root account, the login fails. After entering username and password a progressbar comes up. This gets to 3/4 (if I counted the steps correctly) then stops. If I wait for several minutes, the screen will finally just turn black. (It is *not* switched to suspend or somesuch by DPMS; I didn't wait for that turning black in all tries described below) I can login on a console into the system.
System Intel CPU Core2, E6750 Suse 11.4, 64 Bit (both original and backup system) Kernel: Linux 2.6.37.1-1.2-desktop x86_64 (backup system) / vmlinuz-2.6.37.6-0.5-desktop (original system) KDE: 4.6.00 (4.6.0) "release 6" (on the the backup system, because I don't know how it get the info as long as I can't login to KDE)
[Code]....
View 9 Replies
View Related
Aug 1, 2011
I'm writing this post from the BT5 Live CD. However, after install and reaching a CLI (on the HDD), when I run startx, my monitor simply displays 'invalid format' (obviously this works fine via the LiveCD)... I've installed Ubuntu and Fedora a few times on a few machines, and have never had any issues with the display... not sure where to start troubleshooting.
View 4 Replies
View Related
Jul 20, 2009
I'm receiving the following error message when running LILO under SystemRescueCD after installing Slackware 12.2 (the slackware setup hung when installing LILO so I am trying to install manually - I have re-run setup, including formatting all drives again):FATAL: Trying to map files from unnamed device 0x0010 (NFS/Raid mirror down?)Let me know if any more information is necessary and thank you in advance for any help you can provide.
View 7 Replies
View Related
Aug 20, 2009
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies
View Related
Jan 23, 2010
After installing nvidia drivers (sudo yum install kmod-nvidia), Fedora12 (kernel 2.6.31.12/5) fails to start. To be more exact, it show the 'loading screen', and then the screen gets all scrambled. Trying to switch the ttys doesn't work either (though I can boot in runlevel 3).
I know that there might be some conflicts with nouveu, but i followed the steps from 'Fedora Nvidia Driver Install Guide' (not allowed to post URLs), so I guess nouveu isn't exactly my problem(?).
Another puzzling thing about this, is that I can boot and use FC12 from VMware. No problems there. I also tried removing/reinstalling the kmod-nvidia (and everything else nvidia related), but the problem persists.
Specs: Intel core2duo t7300, nvidia 8600m gs, 2gb ram.
PS tried nvidia installer previously, and problem was the same, so I reinstalled FC12 at that time.
View 9 Replies
View Related
Nov 10, 2010
i installed an nvidia graphics card recently and this
Code:
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1024x768 -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 ./Desktop/mydesktop.mkv
[code]....
View 4 Replies
View Related
Jul 22, 2010
I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
View 3 Replies
View Related
Nov 4, 2010
I'm trying to install Debian Squeeze (net install CD) on a PC with an EX100 wireless keyboard and mouse. The system starts the install without any problem, and the keyboard works up to the first blue menu on the Debian installer then stops - the system fails to respond to any key presses.
The mainboard of the system is an Asus M2N68-AM SE2, keyboard / mouse receiver is plugged into one of the USB ports on the back. I've had a look through the BIOS, there seems to be no option relating to the keyboard. Changing the PnP O/S option seems to make no difference. I've managed to install Ubuntu without problem on this system so I know the PC and keyboard are working fine.
View 1 Replies
View Related
Oct 12, 2010
I recently created a bootable pen drive using unetbootin of Ubuntu 10-10 release. It was failing with error message similar to 'specify the init' then formatted the pendrive/usb and now it was giving, SYSLINUX 3.63 Debian 2008-07-15 EBIOS CopyRight ..... Could not find kernal image. boot: when you press enter it again goes to Could not find kernal image. boot: linux
I believe this is due to USB creator. Let me try with creating bootable USB from some windows machine.
View 2 Replies
View Related
Mar 14, 2010
i am very frustrated with my ubuntu system which is meant as a workstation-server. It seems to loose track of its drives every time I add diskspace.Now every other boot (it seems) it says (among other things: VFS: can't find ext3 filesystem on dev sdd5) drops me to a maintenance-shell and asks for the root password (whats that in ubuntu, the user password does not word) - so I can't log in. Ctrl-D sometimes works and it boots through or boots after warmstart by Ctrl-Alt-Del.
[edit: found out that with alt-f3 i can access a normal shell - good - but how do I start up the GUI in ubuntu? - startx does not work] I have manually fsck'd all ext2/3 partitions form a ubuntu booted from CD - still it says something about not being able to mount /dev/sdd5.Since every now and then I have so much trouble bringing up the machine I am quite unhappy. I suspect the constant updates are prone to break things - is that so?And how do I resolve this issue. Unfortunately there is nothing about the errors in /var/log/messages or dmesg so it is no use posting it here. Where are such errors recorded? [edit: I changed the mappings in fstab to resolve the issue - still it is awkward that drives get messed up so easily. Are UUIDs in fstab less error prone when moving drives around, or do they have other issues?]
View 9 Replies
View Related
Jun 5, 2010
after someone accidentally kicked the power cord for a server out of the wall,the server fails to boot. upon reconnecting.this is the output i get:
Code:
fsck from util-linux-ng 2.6
/dev/sda5 was not cleanly unmounted, check forced.
filesystem checks are in progress (ESC to cancel)[code].....
View 1 Replies
View Related
Jul 28, 2010
I have a laptop with Windows 7 and Ubuntu installed in seperate partitions. When I boot up the computer I get options to boot either in windows 7 or Ubuntu. Yesterday I updated Ubuntu to 10.4 version. I have been having issues with grub rescue, which was rectified an hour ago. Now I can boot up into windows 7, but when I try to boot into Ubuntu, I get a GRUB screen as below code...
View 1 Replies
View Related
Nov 5, 2010
I've installed burg with no major hassle. Started up the computer to see a pretty new boot menu, but Ubuntu fails to boot. The screen immediately turns black and the computer reboots. Fortunately, I have grub backed up on a usb flash drive so I can boot.
View 1 Replies
View Related
Mar 14, 2011
This morning my system has a problem which is beyond my ability to understand: Firstly, the system does not boot automatically, after a fixed delay, from the grub menu. I have to press 'enter' against a chosen boot option. Secondly boot then fails. A lot of messages flash past the screen (which appear to be a trace) and end showing the following (partial example):
Code:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
at this stage I can move around the directory structure using 'cd', but no other commands seem to work.I tried the recovery boot option - same result. Is this a symptom that my boot drive has failed? No, that can't be true, or I would not be able to see the grub menu, would I? I can't find a similar situation after a Google search; what recovery procedure I should use? Correction: I must have had brain fade: I see there is quite a long thread on this very topic on the forum. I'm going to examine that first before I ask for more help.
View 6 Replies
View Related
Apr 5, 2011
this problem began some time ago and I can't quite remember how or why. This computer is somewhat new as my former HDD died and I bought some other stuff along the new HDD and it wasn't until some time later that I noticed the problems which never happened before, I had been using Ubuntu 10.10 both before and after I got the new HDD.For some reason, Ubuntu began giving error messages when I tried to run it, most often it would give them over and over unless I decided to give up and try again several minutes later. The error message was always a lot of weird things from which the only thing I could make out was
"Kernel panich - Not Synching: VF:S unable to mount root fs on unknown-block 0,0" (or something like that)I tried using other kernels but it'd give the same error message, I sometimes even used WinXP, sometimes it'd boot correctly, others it'd reboot.This became really annoying and tried with a clean install, the first few times I logged in seemed to be working fine but this morning I'm having a problem that seems even worse.When I try the now only kernel I have available it just remains unmoving from a blinking cursor screen. If I try the recovery mode I get the "Kernel panic..." errror message and when I try with Memory Test
View 9 Replies
View Related
