Code: $ su -c 'yum install wine' this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
Code: # yum update Loaded plugins: presto, refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package evolution.i686 0:2.30.2-1.fc13 set to be updated --> Processing Dependency: libedataserver-1.2.so.11 for package: nautilus-sendto-2.28.4-1.fc13.i686
Error: Package: empathy-126.96.36.199-1.fc13.i686 (@updates) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: gnome-panel-2.30.0-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora)Error: Package: nautilus-sendto-2.28.4-1.fc13.i686 (@fedora) Requires: libedataserver-1.2.so.11 Removing: evolution-data-server-2.30.1-2.fc13.i686 (@fedora) You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
Last nights upgrade of java-1.6.0-openjdk-188.8.131.52-184.108.40.206.fc13.i686 and java-1.6.0-openjdk-plugin-220.127.116.11-18.104.22.168.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 22.214.171.124-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
After updating to kernel-126.96.36.199-147.fc13.i686, my email (Thunderbird) fails to connect to the pop-server, and webpages (Firefox) load VERY slow, if at all.When I go back to kernel-188.8.131.52-85.fc13.i686, I have no problem at all.Network chipset: RTL8180
I'm currently using FC 9 - 2.6.27 x86_64. (In my Hp - nx6320 laptop with- Intel centrino Duo processor). I have downloaded linux-184.108.40.206. How do I install this with i386/i686 configuration set. All that I want is a 32 bit - linux-2.6.30, because NCTUns 5.0 works only with the 32-bit kernel. I have tried following:
Code: make ARCH=i386 menuconfig After this, I see the architecture set to "X86_32 = Y" in the .config file. But later, after I run
Code: make bzImage The configuration restarts asking to select Y/N for various packages and modules. I have no much idea on what to select and what not to, in order to retain X86_32 set. I end up with the new .config file with contents as below after the make bzImage command.
Code: #X86_32 is not set X86_64 = y Again it is going to be built as a X86_64 bit kernel.
How to install the kernel as 32-bit along with the existing FC-9 64 bit kernel.
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
I am running FC13 on a fairly old PC (PIII 500MHz, 384MB RAM, 10GB SCSI disk). It works fine using kernel 220.127.116.11-112.fc13.i686.PAE. After a series of recent updates the system now also has a new kernel 18.104.22.168-56.fc13.i686.PAE.
/boot/conf/grub.conf contains: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) code....
When I try and boot to the newer kernel I get an error like:
Kernel panic - not syncing VFS Unable to mount root fs on unknown block(0,0)
I read on the forum about a similar problem where the fix was to insert the line
but this file doesn't exist and so the boot then hangs with no messages, so I took this line out again. Here is contents of /boot:
$ ls -l total 21148 -rw-r--r--. 1 root root 111391 May 27 04:06 config-22.214.171.124-112.fc13.i686.PAE -rw-r--r--. 1 root root 112291 Sep 15 04:32 config-126.96.36.199-56.fc13.i686.PAE drwxr-xr-x. 3 root root 1024 Jan 23 2010 efi code....
As you may deduce from the above I haven't used the system much so the auto-update hasn't run for several months.
Any help on running / installing the newer kernel appreciated. Note that I am trying to install a wireless LAN card and am following instructions here: url
I got as far as
cd /lib/modules/`uname -r` ls -l
[root@localhost 188.8.131.52-112.fc13.i686.PAE]# ls -l total 3300 lrwxrwxrwx. 1 root root 51 Jun 3 00:52 build -> ../../../usr/src/kernels/184.108.40.206-112.fc13.i686.PAE drwxr-xr-x. 2 root root 4096 May 27 04:08 extra drwxr-xr-x. 11 root root 4096 Jun 3 00:52 kernel code.....
so I have the src files for the newer kernel not the one I am running. I thought it best to stop and think (and ask for help!) rather than break a working machine (but with no wireless LAN!)
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 220.127.116.11-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
I'm running Ubuntu Lucid formatted ext3. It boots with Grub (old Grub) in sdb6 (hd1,5) It mounts at /, and its partition, sdb6. is flagged boot.
I created a new partition for Fedora 13, 64bit. I installed Fedora in sdb8 (hd1,7), formatted ext4, and created a separate /home in sdb7, formatted ext3, so I might share it with Ubuntu, in sdb6.
Fedora installed with Grub2. It booted fine, and after adjusting references in fstab Ubuntu booted OK too, but rather roughly.
That is when I shifted the boot flag to the Ubuntu partition. So now the original Ubuntu Grub is handling boot once again. Ubuntu boots as before, but I can't get Ubuntu's Grub to boot Fedora. An earlier post suggested this code, which generated error 13, Invalid or inappropriate executable:
I tried the following code, pasted from the Fedora Grub, but it doesn't work either:
I've got alternative lines invoking the kernel, because someone had suggested omitting the direct reference to root= ....
Either way I get error 2 - Bad File or directory.
I suspect the problem may be that I'm booting Grub in an ext3 partition and trying to invoke Fedora in an ext4 partition. Does anyone know if that is the likely cause of my problem? If so I can reinstall Fedora formatted ext3.
Alternatively, can I create a Fedora /boot partition, and move/reinstall Grub there? Either way -- should I use old Grub, so both Grubs are the same?
Should I have assigned mount points to sdb8 (Fedora) and sdb7 (home)? Currently I'm not using sdb7 at all.
I'll attach a screenshot from GParted of my partitions.
Having just installed fc13 and downloaded the KDE package I attempted to log out as user and back in as root, but I keep getting a message about the wrong password. This is odd as the same password works in terminal if I try to become a SuperUser. I have tried turning off SELinux to no avail. I cannot log in from cold as root,only as user.
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
I installed Fedora 12 onto my PC today and I've tried installing a set of updates and get the following
A package could not be found that allows the action to complete.
librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686 librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686 : librpmio.so.0 is needed by package abrt-1.0.8-2.fc12.i686 librpm.so.0 is needed by package abrt-1.0.8-2.fc12.i686
I just upgraded my box to ubuntu 10.4 from 8.04, as usual fast and without complications.I want to use the i386 kernel instead of the i686 (2.6.32-24) with aptitude and synaptics I have downloaded and installed but when I restart it jumps directly to gdm, no grub to choose, I also try to unistall the i686 version trough synaptics, as I did in previous versions , but I couldnt find any linux-i686 entry
This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.
Forgive me if I have posted this in the wrong forum, first time poster with Fedora. I have been using Linux for some time now, mostly Mint, but Fedora 12 @ work. Anyway, I receive the following error in my /var/log/boot.log:
Code: nvidia.ko for kernel 18.104.22.168-70.fc12.i686 was not found and the driver does not load (My xorg.conf file is not loaded), but once I am at a
I had fedora 12 installed on a Macbook pro Intel first generation with ATI Radeon graphics card (see the attachment). Compiz crash when trying to watch *.wmv movie codified with wmvvc1dmo on kernel-PAE-22.214.171.124-67.fc12.i686. I want to convert the film to *.mpg, then I download the mplayer codecs in order to see the film, I can do it without problems with the on kernel-PAE-126.96.36.199-174.2.22.fc12.i686. But I updated my system last Saturday and when I was trying to see the movie again the computer began to respond really slow, then I began to close applications and when I tried to restart I got the message: "compiz is not responding".
I tried again but the same problem. Other thing that I noticed is that when the computer go to sleep, when I wake up it, the display show horizontal black spikes, it is like it doesn't have the appropriate refreshing rate. I think that the problem is related with the acceleration on graphic card. Yesterday, I booted on kernel-PAE-188.8.131.52-174.2.22.fc12.i686, and I watched the film, and the wake up was without problems. That is the reason I call it a regression.
One of our F14 machines was originally set-up with the i386 Kernel. I found out it had a kernel crash and the person tried to fix it by reinstalling the kernel, unfortunately they installed i686. Now some of our software that was setup to work with i386 is not cooperating. Is there a way to switch from the i686 kernel to i386 without reinstalling the system?