im running virtual box on an iMAC and when i boot up fedora it only lets me put the display upto 800x600 so its very hard to see and it wont let me select any thing besides like 600x400 or 800x600
View 2 Replies
In my laptop i have an ATI radeon HD 3200 , I installed Fedora 10 and also the fglrx driver I have 3d acceleration and works well. The problem is that the display makes a weird sound when i use a resolution higher than 800x600, and the display appears like "Unknown". The Display is a : 14" HD Acer CineCrystal LED LCD.
View 4 Replies View RelatedRecently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
I just installed debian (5.04) and my display won't go higher than 800x600. I'm familiar with openSuSe; where to check if video card & driver was detected corectly but am lost in debian. My video card is nvidia and it could do 1280x1024 on windows NT5. I think I picked through all the menus looking for this info but couldn't find anything.
View 7 Replies View RelatedContinuing with my 11.3 install on an old Toshiba Tecra M1 laptop:
When i was installing, i had the options of 1600x1200, 1280x1024, 1024x768 etc.
I chose the 1024x768, because it fit the laptop screen perfectly.
But after the installation, the highest resolution i get is 800x600, and it's wasting a bunch of real estate on the screen.
I mean, if during installation it could do 1024x768, why not after the install? obviously the graphics card supported it.
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
View 7 Replies View RelatedSo I installed Project64 (For those who don't know it is a Nintendo 64 emulation program so I can get my Mario fix), Which I always read is hard to put on a Linux. I didn't think I had WINE so I ran $ whereis wine and I guess I do. But I never set a config for it, So I don't get how an install through wine would work. How was the .exe read?, Because I thought wine had to run to read those, and I don't think it ran. At least there was no visible sign when I installed.
||-2nd part-||
I got my Project64.exe, put it in a directory I made, did the $ ch commands to change permission , did $cd <dir> then I ran ./Directory:$ Project.64.exe 'gamefile.z64' and it seems to work fine. Except for it leaves the display as 800X600 after I close it. Why is it changing display size, and not returning to my default and can I make it stop doing it?
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies View RelatedI am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies View RelatedI'm a faithful user of Ubuntu Linux, especially 9.04 Jaunty Jackalope. I have a problem with my screen resolution on my LG Flatron L1718S. It's a 17 inch and its recommended resolution is 1280x1024.I was on this resolution all along until now. Now I'm limited to 800x600 resolution. Here's what happened. Before installing Ubuntu 9.04 on a friend's computer, I put in his Seagate 40 Gig hard drive into his Intel Celeron Box with a 2.93 GHz and 512MB ram. I then plugged my monitor into his system. Upon booting, I discovered that the hard drive had a very strange looking operating system called OS2 Warp...seemed like Black XP to me. On the desktop, the icons were so big and bloated,the mouse was frozen, there was so much eyecandy which demanded so much graphics resources.
His graphics card is an onboard one, framebuffer. I then rebooted the machine, this time running the Ubuntu 9.04 live CD. Resolution still ok, with 1024x768 this time. I installed Ubuntu 9.04 and finished. I shut down the machine, unplugged my monitor and plugged it back into my machine, which is a Intel Celeron with a 2.4GHz processor, 1,5GB RAM, 80GIG X 2 Seagate IDE hard Drives, 2 DVD Drives, an LG Spermulti-DVD rewriter and a BENQ DC W2000 rewriter.My graphics card is NVidia GeForce NV34 FX5200 Series, 256MB RAM Graphics Card. Suddenly everything on the desktop is so large, and the maximum resolution now is 800x600. It becomes 640x480 if i add Nvidia drivers, version 173. If I switch over to Windows XP, Service Pack 2, I have no resolution issues there. Nvidia drivers are loaded there as well. No issues with resolution there. To test the screen again, I plugged my monitor back into my friends computer that I mentioned earlier on. The resolution is stuck on 800x600. After plugging the monitor back to my computer, I tried to edit the X.conf using "sudo nano", adding the desired parameters, like undetected screen resolutions, monitor name, device,etc, but nothing worked.
I always had to resort to the backed up configuration file for XOrg. The latest Ubuntu 10,04 Lucid Lynx picks up my monitor with a maximum resolution of 1024x768.The Mandriva One 2008 Live CD also gave me the same result like Ubuntu 10.04, this time giving me more higher resolution options. Strangely enough, from my Ubuntu 9,04 and older, after several tests, the resolution is still stuck to 800x600. When I press the AUTO RESET button on my monitor, the screen says "Processing image Auto Adjustment-For Optimal display, change resolution to 1280x1024". A factory reset did not help. The resolution was perfect until I plugged my monitor into my friend's computer, the one with the 2,93GHz processor. I took another friend's monitor, a HP Cathode Tube Monitor, a 17 inch as well, and plugged it to my machine to test the resolution. The results were glorious! All resolution options were shown, from the lowest "320x240" to beyond "1280x1024". Plugged it back to mine, the same result showed: 800x600 resolution, the lowest being 320x240. I kindly ask for advice on how I can be able to get all the screen resolution options available on my Ubuntu 9.04, like before, because it shows the maximum of800x600, lowest- 320x240 on "display" in "System--Preferences".
Booted puppy 4.12 off usb many many times have i booted puppy and other distros this has never happened I get to part where you choose xorg or xvesa I chose xvesa, as usual my monitor makes a "click" noise as if its been turned off but it doesn't turn off default puppy xvesa is 800x600 so i changed it to 1024x768 as usual after messing around I reboot into my ubuntu-9.04 install and my desktop is 800x600! I reboot into my SalixOS install and my desktop is 800x600! every system I boot into is this way! even live cd's! the PC is a Emachines with everything Nvidia mx4000 geforce and old 15inch vga monitor how do I output graphics card and monitor info?
Here is the xorg.conf every distro changed too
Code:
If I install the nvidia drivers in ubuntu/debian, only then can I get 1024x768 resolution
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
I'm trying to batch encode some old mpeg2 vids to x264. After much playing around, I've finally found some settings that work across the board in preserving quality. The good news is the converted vids are about half the size.
I'm using handbrake to do this and with over a thousand clips, converting via the gui would be way too time consuming. Naturally CLI is much faster for something like this. I've found all the flags and arguments to pass to handbrake
So, suppose my vids are in ~/MyVideos. I want to store my converted vids in ~/ConvertedVids. The problem is that there is a whole folder hierarchy after ~/MyVideos that goes several levels deep; I want to preserve this. In handbrake, the output file is a parameter like so:
Code:
handbrake_cli -i input_file -o output_file
I know stripping away the filepath upto ~/MyVideos/ should be trivial with awk. I don't know awk and was wondering if someone here could give me the command I need.
i want to delete some say 10 previous commands in bash shell!
View 3 Replies View Relatedi recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.
View 11 Replies View RelatedI need a loop that pulls out the user name into a variable and then pulls out the LastUpdate field into another variable so I can then perform a comparison against the last update field. Requirements are AIX tools including AWK, SED and Perl I am writing a script to check AIX users password expiration dates and if they are within the alerting period (ie. 7 days etc) it will email the user. I will release the full script into the public domain once completed. The text file I want to parse is formatted like:
Code:
colettel:
password = XSON0m4SdIQDw
lastupdate = 1260829398
andrewwa:
[code].....
Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!
View 4 Replies View RelatedMy screen resolution is stuck at 800x600. I am using Fedora 11. The screen resolution used to go higher, but after a restart I have not been able to get it about 800x600. Below is a link to my smolt profile, [URL]This is my video driver Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller. It is an onboard card. I have installed a new graphics driver which did not help. The name of it is, i915Graphics.tar.gz. Keep in mind I installed the driver after F11 wouldn't allow me to increase the resolution from 800x600.
View 14 Replies View RelatedI have just installed F12 on an 3yr old Acer box and I believe it has an ATI video card. I am currently running it using the "vesa" driver but it only gives out 800x600 and I would prefer 1024x768 - I do not use it for games or anything high res. how do I find out what card is installed?
View 3 Replies View Relatedbooting up the PC (Before or After user login) display an "Acceptable Usage agreement" with a OK button. The User must press OK to proceed. The Acceptable Usage agreement shows our companies System network policy. It can be easily done in a windows PC (Look Here). But I don't know how it is configure in ubuntu .
View 2 Replies View RelatedI am trying to boot linux kernel from a USB stick. I performed following steps:
1. wrote Grub stag1 to MBR of USB with this command on my linux host.
dd if=/boot/grub/stage1 of=/dev/sdb1 bs=512 count=1
2. Mounted the USB and I copied the following files in my USB.
boot/grub/stage1
boot/grub/stage2
3. Plugged in the USB in the the target machine. Rebooted and changed the booting sequence to boot from USB
My problem is that instead of getting a boot prompt, iIam getting GRUB GRUB GRUB all over the display. I googled out for it and found that if we change the auto-detection oh HDD in bios to manual that may solve the issue, but that did not help. If you happen to know that I am following the correct steps and in right order please point me how can I resolve this issue of GRUB.
I downloaded Ubuntu 10.04 Desktop and have tried booting the ISO from a USB stick and also installing it to my HD with Wubi.Unfortunately my experience hasn't been any better than when I tried Ubuntu 8.10When booting the Live iso from my USB stick, my display goes into sleep mode (IE is receiving no signal) from the momentUbuntu begins booting until eventually the desktop appears several minutes later. If I was the average punter I would probably have assumed nothing was happening and rebooted.
As I have some experience with Linux (barely), I thought to try Ctrl-Alt-F1, which brought the monitor back to life and showed the terminal. As soon as I switched back to the main window (Ctrl-Alt-F8 I think) the display went back into sleep mode.Once it had booted, I did "sudo apt-get update", which worked and then "sudo apt-get upgrade", which did a lot of updates and then sent my monitor back into sleep mode, requiring me to reboot!When I tried to boot the Wubi install, again the display went into sleep mode as soon as Ubuntu started booting but this time the desktop never appeared and after about 5 minutes I rebooted.My motherboard is a Gigabyte MA780G-UD3H and I'm using the onboard HD3200 IGP and a Phenom II X3 720 and 4GB DDR2 1066Mhz RAM.
While booting the system display the msg disable IRQ # 209
How to fix this problem
in an attempt to get me less radioactive i have put my lappy on a desk not on my lap. it is a little way from me so i need to do 800x600 resolution so i can read comfortably. the fedora install i have (vista copes ok) only shrinks down the screen to 800x600 when i choose this screen mode. i really need 800x600 fullscreen.
View 1 Replies View RelatedHow come on x11vnc, with Fedora 12 PPC/x86/x64, my screen sizes can't be greater than 800 x 600, and they don't update when I change them in Displays. On my Ubuntu installations the x11vnc screen sizes update and can be basically any size selectable in Monitors.
View 1 Replies View RelatedI'm writing this post from the BT5 Live CD. However, after install and reaching a CLI (on the HDD), when I run startx, my monitor simply displays 'invalid format' (obviously this works fine via the LiveCD)... I've installed Ubuntu and Fedora a few times on a few machines, and have never had any issues with the display... not sure where to start troubleshooting.
View 4 Replies View RelatedIi successfully installed RHEL 5 on my HP pavilion tx200 (tablet) I reboot the system and the booting was successful but failed to display the interface that will allow me to supply my user account, I installed it using custom layout and default layout but the result was the same.
View 2 Replies View RelatedI need to show a static image with the logo of our department while Debian boots. Is there any easy way or tool to do this? (Any parameter of the kernel maybe?) It doesn't have to be anything fancy (like a progress bar)... just a plain an simple image.
I've seen many bootsplash projects..but most of them are broken. I tried splashy (which is available on the repo), but by the time it loads, my system is already booted, so I don't really like it. note that I don't have any Xorg server installed.
I recently install Ubuntu-studio Desktop and some other packages. And, I upgraded my System. But since then, the Grub has started to display (I have only 9.10 installed, using the entire Disk). Also, unless I select the entry, Grub does not automatically start. The startup takes nearly 1.5 minutes. And, the Login screen, after the installation of Ubuntu Studio GDM, is much slower. I removed the Ubuntu-studio GDM package, still it takes about 20 seconds to allow me to enter Username and password. Any idea?
View 2 Replies View RelatedI am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View Related
