Fedora Hardware :: 11 - Resolution Stuck At 800x600

Nov 24, 2009

My screen resolution is stuck at 800x600. I am using Fedora 11. The screen resolution used to go higher, but after a restart I have not been able to get it about 800x600. Below is a link to my smolt profile, [URL]This is my video driver Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller. It is an onboard card. I have installed a new graphics driver which did not help. The name of it is, i915Graphics.tar.gz. Keep in mind I installed the driver after F11 wouldn't allow me to increase the resolution from 800x600.

View 14 Replies


ADVERTISEMENT

Debian :: Display Resolution Stuck At 800x600

Nov 26, 2010

Recently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.

# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm

[Code]....

View 1 Replies View Related

OpenSUSE Hardware :: Resolution Stuck In 800x600

May 18, 2010

I just switched to opensuse a couple of days ago and I noticed that my resolution was stuck in 800x600. I went and downloaded the nvidia drivers and went to install the driver for my monitor through sax2. When I tried to add the monitor driver I would get out of range errors. I rebooted and can now set the resolution to 1680x1050 which is my max. However, when I go to test these new settings the resolution shown in the window is 1400x1050. GPU: Nvidia GeForce 9600 GTX Monitor: LG FLATRON L227WTG

View 9 Replies View Related

Ubuntu :: Broken - Stuck At The Resolution 800x600

Feb 23, 2011

It started when I first installed Ubuntu because I heard it was good and I felt like a change of OS, but it didn't recognise my monitor and because of that it was stuck at the resolution 800x600 (I think) and so it didn't quite look right, also it made going on the Internet really awkward, so I searched on the internet to find out how to fix it and I couldn't find anything that worked, so instead I installed Ubuntu netbook version thinking that it would recognise it because it is meant for laptops, so I put the ISO on a USB and it installed but if I tried to do it again it just tried to reinstall itself (I think it was just because I didn't delete the other Ubuntu) and so I just stopped using the USB, so I eventually gave up and tried to delete linux.

I used the Wubi installer for the original Linux so I used that (in the C drive in the Ubuntu folder) to uninstall it too which looked like it uninstalled it fine, I then made the stupid mistake of using EASUS (I think, I cant check anymore) Partition editor and deleted all of the linux sections and made the C drive bigger, after it finished that my laptop doesn't boot up and im stuck at a black screen with it saying to reboot and insert proper boot device. With it not booting I couldn't do anything, but then I remembered the USB and so I put that in and now it boots to Linux, but I really want my windows 7 back because this linux isn't even installed and wont install, the only way I can use it is by exiting the installer and then using the ubuntu that doesn't really look right and doesn't save anything I do. Is there anyway to get my windows 7 back or am I stuck using this?

View 9 Replies View Related

Ubuntu :: Stuck With 800x600 Display Resolution

Mar 2, 2011

I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.

View 7 Replies View Related

Hardware :: Ubuntu 9.10 - Resolution Stuck @ 800x600 (intel)

Jan 25, 2010

i Just installed ubuntu 9.10 on my Acer laptop im new to linux and dont know how to fix this, (the resolution is stuck) the graphics card of the laptop is an Intel HD graphics media accelerator or somthing and i have looked everywhere for the drivers intel only supply them for windows 7 im completely stuck

View 1 Replies View Related

CentOS 5 :: Aspire One Screen Resolution Stuck On 800x600?

Mar 31, 2011

I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.

View 5 Replies View Related

Ubuntu :: 1080p Vizio Razor VM230XVT TV Stuck At 800x600 Resolution?

May 1, 2011

I am completely new to Ubuntu or any Linux based OS whatsoever, so excuse me if I sound retarded. I recently installed Xubuntu to an old laptop of mine and everything went fine except for the fact that I had to install a WiFi driver; I liked Xubuntu so much that I decided to go ahead and dual boot Ubuntu on my WIndows 7 machine. After I installed Ubuntu, I realized that I was stuck in 800x600 resolution and I was unable to run the resolution in 1920x1080 like I should be able to. I tried to uninstall and reinstall Ubuntu and I had the same thing happen. Most of the other help forums I had searched claimed that I needed to check my Xorg Config, but I don't know how to do that. Also, I get a "too many connections" message every time I start in Ubuntu; could this possibly be related?

[Code]...

Quick update: Ubuntu will not let me use the "extra visual effects" option for my desktop appearance. It stars searching for a driver then doesn't let me use the enhanced visuals. This leads me to believe that it's a driver issue. How can I tell which driver I am using in Ubuntu????

View 2 Replies View Related

Fedora :: Screen Resolution Won't Go Above 800x600

Oct 19, 2009

i recently installed fedora 11 i386 from fedora 8 i386. it was a fresh install. with 8 i had a 1024x768 res and my monitor is a 15.4" Polaroid LCD tv that has a max res of 1280x800. when i goto display and try to change the res it only shows 800x600 and below.

View 11 Replies View Related

Fedora :: 11 - Fix Screen Resolution Higher Than 800x600

Oct 1, 2009

Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!

View 4 Replies View Related

Ubuntu :: Resolution Randomly Sets To Either 1024x768 Or 800x600 - Permanently Set A Resolution?

Dec 26, 2010

Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?

View 1 Replies View Related

Fedora :: 800x600 Fullscreen Resolution On Lenovo 3000 N200?

Oct 25, 2009

in an attempt to get me less radioactive i have put my lappy on a desk not on my lap. it is a little way from me so i need to do 800x600 resolution so i can read comfortably. the fedora install i have (vista copes ok) only shrinks down the screen to 800x600 when i choose this screen mode. i really need 800x600 fullscreen.

View 1 Replies View Related

Fedora Hardware :: Display Acer CineCrystal - Set Resolution Higher Than 800x600

Jul 24, 2009

In my laptop i have an ATI radeon HD 3200 , I installed Fedora 10 and also the fglrx driver I have 3d acceleration and works well. The problem is that the display makes a weird sound when i use a resolution higher than 800x600, and the display appears like "Unknown". The Display is a : 14" HD Acer CineCrystal LED LCD.

View 4 Replies View Related

General :: Resolution Max Is 800x600 - Can't Set A Resolution Of 1024x760

Apr 2, 2010

I've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?

View 2 Replies View Related

Debian Hardware :: Display Stuck At 800x600

Jun 21, 2010

I just installed debian (5.04) and my display won't go higher than 800x600. I'm familiar with openSuSe; where to check if video card & driver was detected corectly but am lost in debian. My video card is nvidia and it could do 1280x1024 on windows NT5. I think I picked through all the menus looking for this info but couldn't find anything.

View 7 Replies View Related

Debian :: Can't Change Resolution From 800x600

Apr 12, 2010

got an acer aspire one zg8 running debian in a vmware enviroment i only have 800x600 and cant change resolution do i need to install linux drivers for intel 945 express vga card? i googled for drivers for vga card but linux and there were linux drivers,but it said linux 4 trying to get into linux.

View 1 Replies View Related

Debian Multimedia :: Cannot Get Better Resolution Than 800x600

Aug 25, 2010

I just installed Debian 5 onto an older PC and cannot get a better resolution than 800x600. The PC is currently dual booting with Windows XP and in Windows I can get the resolution to 1280x768 without any issues. I checked the device manager in Windows and the video card shows up as VIA/S3G Unichrome II. What do i need to do to get this working at 1280x768 in Debian? I had Mint installed previously and it got to this resolution fine until I upgraded it to a new version, then it was stuck at 1024x768.

View 3 Replies View Related

Ubuntu :: Cannot Set Resolution Higher Then 800x600 10.04

Jul 2, 2010

I have just done a clean install of 10.04 and cannot for the life of me set the resolution higher then 800x600 When I go to change the resolution I am greeted with a unknown monitor.

lspci | grep -i vga
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)

Here is the Xorg config file I have configured

Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
[Code].....

View 4 Replies View Related

General :: Can't Get The Resolution Higher Than 800x600 In 10.10?

Jan 1, 2011

I have installed Ubuntu 10.10 as a virtual machine under my Win7 windows. Everything is OK except that I can not get resolution higher than 800*600. Actually there are two options in Display Settings Menu 800*600 and 640*480. But my laptop has 15.4 inch monitor so its normal resolution is 1280*800.

View 3 Replies View Related

CentOS 5 :: More Than 800x600 Screen Resolution?

May 17, 2010

Loaded Cent O/S on VMWare Workstation to begin learning for enterprise role.. The largest screen resolution is 800x600. Is this the max or how can I change it to a larger res.?

View 4 Replies View Related

OpenSUSE :: Only Get 800x600 Resolution With GeForce 6150 LE

Feb 12, 2010

I just installed OpenSuse 11.2 and I can't change my resolution. That max it will give me is 800x600. My display card is GeForce 6150 LE. Is this a known problem and can I do anything about it.

View 3 Replies View Related

Ubuntu :: Change Resolution From 800x600 To 1024x768?

Mar 11, 2010

change my resolution from 800x600 to 1024x768..since the latter option is not available in my display settings?

View 1 Replies View Related

Ubuntu :: Screen Resolution Changed To 800x600?

Oct 26, 2010

I've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.

I got as far as

$ xrandr --newmode "1024x576" ...

then,

$xrandr --addmode default 1024x576

but when I

$xrandr --output default --mode 1024x576

I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.

And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.

My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:

Can't Open Display

My first priority is to get the computer back to it's less-broken 800x600 state;

EDIT: I'm running Ubuntu 10.04

View 9 Replies View Related

Ubuntu :: Screen Resolution Will Not Go Above 800x600 Anymore

Dec 12, 2010

After the latest kernel update (2.6.32-26), my computer will no longer start up with a screen resolution higher than 800x600. Before this update, my computer would sometimes startup with this problem, but this could usually be fixed with a restart (or two if necessary). At this resolution the panels and a lot of tool-bars will not display properly, so I am limited as to what I can do using the GUI.

my video card is an S3 unichrome (I think. It is built-in to the motherboard so I don't know for certain) my screen is an old ctr one I am running Ubuntu 10.04 on the 2.6.32-26 kernel

View 6 Replies View Related

Ubuntu :: Unable To Get Screen Resolution Above 800x600?

Feb 11, 2011

here is output of lspci

Code:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 21)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC

[Code]...

View 7 Replies View Related

Ubuntu :: Screen Resolution - Only Choose 800x600 ?

Mar 3, 2011

I have a good Asus monitor in which I can have a resolution of 1280x800 when using Mac Os (I have a Power Mac G4). However, when I try to have a better resolution with Ubuntu, the only resolution that it lets me choose is 800x600! There are no choices. I tried the "detect display" button but it doesn't change anything.

View 8 Replies View Related

Hardware :: Monitor Resolution @ 800x600 After Update

Feb 2, 2009

Here are my stats:

Distro: Kubuntu 8.04
Video: Nvidia 7200 w/ 256mb
RAM: 2gb

What happened: I allowed two weeks to pass before running a full scale update of the kernel, KDE, video driver, and various other apps. The update went through and it prompted for a reboot. Once I did, KDE wouldn't load and it halted.

So I logged in via tty4 and checked out the xorg.conf file. It was really basic and figured I had to reconfigure.. So I ran nvidia-xconfig, then startx. The setting was at 800x600. So I went into nvidia-settings and it said I didn't have a video card with an nvidia gpu.

I copied an old backup xorg.conf and restarted X. Then into nvidia-settings but it wouldn't allow me to set the resolution higher than 800x600. At this point, I began searching forums for fixes. There was mention of envy. So I found it in the repositories and installed it. Still, I couldn't fix the res. So now I'm stuck and asking for assistance. Maybe it is really simple. I just wish I saved my old xorg.conf file before running the update.

View 4 Replies View Related

Ubuntu :: 9.10 - Resolution Automatically Changed Into 800X600

Aug 21, 2010

I have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express

It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.

View 9 Replies View Related

Software :: Not Showing Screen Resolution Beyond 800x600?

Jan 5, 2010

My Fedora 12 is not showing screen resolution beyond 800x600. When I installed latest ATI Radon drivers, screen has become blank and I had to re-install.

View 1 Replies View Related

CentOS 5 :: Screen Resolution Only 800x600 Using VMWare?

Nov 9, 2009

I use a VMWare ESX Server and installed CentOS.

Within the CentOS I can only use the Screen Resolution 800x600.

As I have a VMware installed I use the VMware grafic adapter shown in the hardware selection.

Even if I configure the VM graphic adapter within the ESX to use 1600x1200.

Is there any change to configure a higher resolution?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved