General :: Emulator (Project64) - Display Size 800X600
Apr 26, 2011
So I installed Project64 (For those who don't know it is a Nintendo 64 emulation program so I can get my Mario fix), Which I always read is hard to put on a Linux. I didn't think I had WINE so I ran $ whereis wine and I guess I do. But I never set a config for it, So I don't get how an install through wine would work. How was the .exe read?, Because I thought wine had to run to read those, and I don't think it ran. At least there was no visible sign when I installed.
||-2nd part-||
I got my Project64.exe, put it in a directory I made, did the $ ch commands to change permission , did $cd <dir> then I ran ./Directory:$ Project.64.exe 'gamefile.z64' and it seems to work fine. Except for it leaves the display as 800X600 after I close it. Why is it changing display size, and not returning to my default and can I make it stop doing it?
View 1 Replies
ADVERTISEMENT
Aug 8, 2010
Continuing with my 11.3 install on an old Toshiba Tecra M1 laptop:
When i was installing, i had the options of 1600x1200, 1280x1024, 1024x768 etc.
I chose the 1024x768, because it fit the laptop screen perfectly.
But after the installation, the highest resolution i get is 800x600, and it's wasting a bunch of real estate on the screen.
I mean, if during installation it could do 1024x768, why not after the install? obviously the graphics card supported it.
View 3 Replies
View Related
Mar 5, 2011
Is there a terminal emulator which works well in an Ubuntu desktop and provides the following features which Mac OS X's Terminal application has? Re-wrapping text when the window is resized.A Clear command which clears scrollback (as the shell clear does not) and does not clear the cursor's line (typically containing a prompt).
View 2 Replies
View Related
Feb 10, 2011
How come on x11vnc, with Fedora 12 PPC/x86/x64, my screen sizes can't be greater than 800 x 600, and they don't update when I change them in Displays. On my Ubuntu installations the x11vnc screen sizes update and can be basically any size selectable in Monitors.
View 1 Replies
View Related
Nov 26, 2010
Recently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
View 1 Replies
View Related
Jun 21, 2010
I just installed debian (5.04) and my display won't go higher than 800x600. I'm familiar with openSuSe; where to check if video card & driver was detected corectly but am lost in debian. My video card is nvidia and it could do 1280x1024 on windows NT5. I think I picked through all the menus looking for this info but couldn't find anything.
View 7 Replies
View Related
Dec 11, 2009
im running virtual box on an iMAC and when i boot up fedora it only lets me put the display upto 800x600 so its very hard to see and it wont let me select any thing besides like 600x400 or 800x600
View 2 Replies
View Related
Mar 2, 2011
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
View 7 Replies
View Related
Feb 20, 2011
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies
View Related
Jul 24, 2009
In my laptop i have an ATI radeon HD 3200 , I installed Fedora 10 and also the fglrx driver I have 3d acceleration and works well. The problem is that the display makes a weird sound when i use a resolution higher than 800x600, and the display appears like "Unknown". The Display is a : 14" HD Acer CineCrystal LED LCD.
View 4 Replies
View Related
Feb 10, 2010
I am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies
View Related
Oct 3, 2010
I'm a faithful user of Ubuntu Linux, especially 9.04 Jaunty Jackalope. I have a problem with my screen resolution on my LG Flatron L1718S. It's a 17 inch and its recommended resolution is 1280x1024.I was on this resolution all along until now. Now I'm limited to 800x600 resolution. Here's what happened. Before installing Ubuntu 9.04 on a friend's computer, I put in his Seagate 40 Gig hard drive into his Intel Celeron Box with a 2.93 GHz and 512MB ram. I then plugged my monitor into his system. Upon booting, I discovered that the hard drive had a very strange looking operating system called OS2 Warp...seemed like Black XP to me. On the desktop, the icons were so big and bloated,the mouse was frozen, there was so much eyecandy which demanded so much graphics resources.
His graphics card is an onboard one, framebuffer. I then rebooted the machine, this time running the Ubuntu 9.04 live CD. Resolution still ok, with 1024x768 this time. I installed Ubuntu 9.04 and finished. I shut down the machine, unplugged my monitor and plugged it back into my machine, which is a Intel Celeron with a 2.4GHz processor, 1,5GB RAM, 80GIG X 2 Seagate IDE hard Drives, 2 DVD Drives, an LG Spermulti-DVD rewriter and a BENQ DC W2000 rewriter.My graphics card is NVidia GeForce NV34 FX5200 Series, 256MB RAM Graphics Card. Suddenly everything on the desktop is so large, and the maximum resolution now is 800x600. It becomes 640x480 if i add Nvidia drivers, version 173. If I switch over to Windows XP, Service Pack 2, I have no resolution issues there. Nvidia drivers are loaded there as well. No issues with resolution there. To test the screen again, I plugged my monitor back into my friends computer that I mentioned earlier on. The resolution is stuck on 800x600. After plugging the monitor back to my computer, I tried to edit the X.conf using "sudo nano", adding the desired parameters, like undetected screen resolutions, monitor name, device,etc, but nothing worked.
I always had to resort to the backed up configuration file for XOrg. The latest Ubuntu 10,04 Lucid Lynx picks up my monitor with a maximum resolution of 1024x768.The Mandriva One 2008 Live CD also gave me the same result like Ubuntu 10.04, this time giving me more higher resolution options. Strangely enough, from my Ubuntu 9,04 and older, after several tests, the resolution is still stuck to 800x600. When I press the AUTO RESET button on my monitor, the screen says "Processing image Auto Adjustment-For Optimal display, change resolution to 1280x1024". A factory reset did not help. The resolution was perfect until I plugged my monitor into my friend's computer, the one with the 2,93GHz processor. I took another friend's monitor, a HP Cathode Tube Monitor, a 17 inch as well, and plugged it to my machine to test the resolution. The results were glorious! All resolution options were shown, from the lowest "320x240" to beyond "1280x1024". Plugged it back to mine, the same result showed: 800x600 resolution, the lowest being 320x240. I kindly ask for advice on how I can be able to get all the screen resolution options available on my Ubuntu 9.04, like before, because it shows the maximum of800x600, lowest- 320x240 on "display" in "System--Preferences".
View 8 Replies
View Related
Apr 19, 2011
I am trying to figure out the actual size of files and directories on a CentOS Linux 5 server and when I do a ls -l I see for example at the Directory of /Data 4096 but once in side the directory and I do a ls -l I see larger file sizes. How do I get the actual file size of a Directory to show up?
View 3 Replies
View Related
Dec 7, 2009
Need to find the size of a file (html), and display it in a summary file. (Have tried du, ls, size, but none of these work).
View 6 Replies
View Related
Apr 2, 2010
Since reinstalling Ubu9.04 from disk, I'm unable to view many MP4 videos.
My laptop only has 3 settings for res.
Here's some lshw:
And some attempt at adding a higher value in xorg.conf:
View 14 Replies
View Related
Apr 18, 2010
I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04.
The problem is that I would like to use a larger size display that is configured by default.
Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080.
This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation.
The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file.
I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily.
View 1 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Jun 3, 2010
I have learned Linux for a while now, but Linux is continuously surprising me with new stuffs nearly every day... Today I met a really strange problem, that the command "ls" indicates the size of some directories is ZERO, as for /home.
However, there is a directory inside /home, which contains many files/directories.
Even worst, when I tried to create a file under /home, I got the "permission denied" error,
By the way, /home is within the local file system, not NFS share.
View 7 Replies
View Related
Jul 22, 2010
How to set the display size avoiding taking up the whole screen.e.g.$ ssh -XC -c blowfish user@ip_address display:1 "gnome-panel"Does it take up the complete screen?
View 4 Replies
View Related
Jan 16, 2011
Linux set size display auto 1024x768, i need to change size 1152x864 and then i restarted, size was the last 1024x768. how turn off "auto"
View 9 Replies
View Related
Aug 25, 2010
I installed opensuse 11.2 on ASUS R2E nicely It have a 7" touchscreen and works nice. The screen is correctly settled to 800x480 on boot however after a S2RAM it is reinitialized as 800x600. I made an xorg.conf with only one fixed mode on 800x480 but daesn't seems to be considered on resume. After cold boot sax2 get the right size (800x480) and after resume 800x600 The video chipset is intel 945 GM.
May this be related to hardware reinitialization ? How to re-initialize X on resume ?
View 2 Replies
View Related
Nov 29, 2010
After getting tired of squinting at my netbook screen (System 76 Starling) I bought a 21.5" Asus VE228H monitor. It works beautifully with the right resolution and aspect, EXCEPT that the driver Ubuntu is using is for a 22" monitor, and the image on the screen has about 1/8" missing all around. Sadly, this eliminates the menu bar at the top of the screen. Moving the image down doesn't help. Is there any way to shrink the image, or get Ubuntu to use a driver for a 20" or 21" monitor instead of 22"? I've been using computers since DOS command line days, but have been using Ubuntu only about 2 months.
View 8 Replies
View Related
Feb 18, 2010
I'm wondering if anyone knows of a CDROM emulator that runs on Linux. I want to emulate this configuration:
[CDROM DRIVE]----USB CABLE----[COMPUTER UNDER TEST]
Where [COMPUTER UNDER TEST] is a computer that boots from a physical CD inserted into the [CDROM DRIVE]. Only instead of the [CDROM DRIVE] I want the following configuration:
[CD IMAGE BUILD MACHINE]-----USB CABLE-----[COMPUTER UNDER TEST].
I want to build an ISO image on the [CD IMAGE BUILD MACHINE] and have some sort of USB CDROM emulator running on it to serve up the ISO image to the [COMPUTER UNDER TEST] as though it was talking to the [CDROM DRIVE]. Does this exist? If it does, I can't find it. I want to do this so I can test out bootable CDs without burning a lot of coasters.
View 2 Replies
View Related
Feb 26, 2010
Mobo - Asus M4A78T-E
CPU - Phenom II X4 955
RAM - DDR3 1333 dualchannel 8G
Display - Samsung 2494
Debian 504 64bit
Where can I download respective drivers. Linux drivers coming with the mobo can't work. There is no driver for Linux on the CD coming with the display. Fonts becomes very large even selecting "8". The screen can't expand to the full size of the display.
View 2 Replies
View Related
Sep 26, 2010
I know that you can make it full screen, however it just makes the background OS's background black, and still provides a smaller display. Is it possible to make the guest OS's screen (or display) full size?
View 6 Replies
View Related
Mar 20, 2011
Is there some better way of getting my display size set to 1280x960 when I launch openSUSE 11.4 under VMware Server? Here's what I've done so far: I am running Windows 7 on an AMD Phenom II system (motherboard: Gigabyte 880GMA-UD2H). I installed VMware Server (version 2.0.2) so that I can run openSUSE 11.4. The initial install went pretty smoothly. However, the display size was set to 800x500. I attempted to set it to 1280x960 by changing the /etc/X11/xorg.conf.d/50-monitor.conf file as follows:
Code:
/etc/X11/xorg.conf.d/50-monitor.conf
Section "Monitor"
Identifier "Default Monitor"
## If your monitor doesn't support DDC you may override the
## defaults here
# HorizSync 28-85
# VertRefresh 50-100
HorizSync 1-10000
VertRefresh 1-10000
## Add your mode lines here, use e.g the cvt tool
Option "PreferredMode" "1280x960_60.00"
# 1280x960 59.94 Hz (CVT 1.23M3) hsync: 59.70 kHz; pclk: 101.25 MHz
Modeline "1280x960_60.00" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync
This resulted in a display size of 1734x1342 (or something close to that). I noted from the /var/log/Xorg.0.log file that the vmwlegacy driver is being used instead of the vmware svga driver. There is a note that the vmwlegacy driver does not support the "PreferredMode" setting in the monitor section of the xorg.conf files. For the time being, I have set my horizontal and vertical rates to 60kHz and 60Hz, respectively. This does limit the maximum display size to 1280x960, but for all the wrong reasons. How do I set up my system to get the correct display size?
View 4 Replies
View Related
Sep 1, 2011
In Ubuntu 11.04, all windows display larger than the available screen size, and I haven't found a way to make them fit within the display area of the monitor. This is a Dell 19" flat screen monitor, and I've tried changing the display; no matter what resolution is selected, the windows all bleed past the screen.
View 5 Replies
View Related
Aug 7, 2010
how can I display all databases and their size using command lines (linux) in a mysql server?
View 3 Replies
View Related
Jul 28, 2010
System won't retain 16:9 display size setting in YaST (SaX2). I'm using SuSE 11.1 (64 bit).
SaX2 settings as follows:
Monitor is Samsung Syncmaster XL2370-1 (digital). Resolution is set to 1920X1080 (1080p). Diagonal measurement set to 23 inches. Display size indicates 509 m.m. X 286 m.m. (20 3/8" X 11 1/2").
Aspect ratio is entered as 16:9, but after saving and restarting computer it keeps coming back as 16:10.
Samsung literature says 16:9, and measurements above confirm this.
So why does it keep going back to 16:10, and how can I get it to retain 16:9? (Same thing happens on another computer, also running SuSE 11.1, and with a second of these same monitors.)
View 9 Replies
View Related
Dec 28, 2009
I am using OS 11.0 Every time I boot my laptop (dell inspiron 9300 - ati video M300). I get the desktop display as 1920 X 1200. This is too large for my default. I use KRandRTray to resize back to 1024 X 768. How can I set 1024 X 768 as the default but still have the option to go to 1920 X 1200?
View 3 Replies
View Related
