I just installed debian (5.04) and my display won't go higher than 800x600. I'm familiar with openSuSe; where to check if video card & driver was detected corectly but am lost in debian. My video card is nvidia and it could do 1280x1024 on windows NT5. I think I picked through all the menus looking for this info but couldn't find anything.
View 7 RepliesRecently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
View 7 Replies View RelatedMy screen resolution is stuck at 800x600. I am using Fedora 11. The screen resolution used to go higher, but after a restart I have not been able to get it about 800x600. Below is a link to my smolt profile, [URL]This is my video driver Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller. It is an onboard card. I have installed a new graphics driver which did not help. The name of it is, i915Graphics.tar.gz. Keep in mind I installed the driver after F11 wouldn't allow me to increase the resolution from 800x600.
View 14 Replies View RelatedI just switched to opensuse a couple of days ago and I noticed that my resolution was stuck in 800x600. I went and downloaded the nvidia drivers and went to install the driver for my monitor through sax2. When I tried to add the monitor driver I would get out of range errors. I rebooted and can now set the resolution to 1680x1050 which is my max. However, when I go to test these new settings the resolution shown in the window is 1400x1050. GPU: Nvidia GeForce 9600 GTX Monitor: LG FLATRON L227WTG
View 9 Replies View RelatedIt started when I first installed Ubuntu because I heard it was good and I felt like a change of OS, but it didn't recognise my monitor and because of that it was stuck at the resolution 800x600 (I think) and so it didn't quite look right, also it made going on the Internet really awkward, so I searched on the internet to find out how to fix it and I couldn't find anything that worked, so instead I installed Ubuntu netbook version thinking that it would recognise it because it is meant for laptops, so I put the ISO on a USB and it installed but if I tried to do it again it just tried to reinstall itself (I think it was just because I didn't delete the other Ubuntu) and so I just stopped using the USB, so I eventually gave up and tried to delete linux.
I used the Wubi installer for the original Linux so I used that (in the C drive in the Ubuntu folder) to uninstall it too which looked like it uninstalled it fine, I then made the stupid mistake of using EASUS (I think, I cant check anymore) Partition editor and deleted all of the linux sections and made the C drive bigger, after it finished that my laptop doesn't boot up and im stuck at a black screen with it saying to reboot and insert proper boot device. With it not booting I couldn't do anything, but then I remembered the USB and so I put that in and now it boots to Linux, but I really want my windows 7 back because this linux isn't even installed and wont install, the only way I can use it is by exiting the installer and then using the ubuntu that doesn't really look right and doesn't save anything I do. Is there anyway to get my windows 7 back or am I stuck using this?
i Just installed ubuntu 9.10 on my Acer laptop im new to linux and dont know how to fix this, (the resolution is stuck) the graphics card of the laptop is an Intel HD graphics media accelerator or somthing and i have looked everywhere for the drivers intel only supply them for windows 7 im completely stuck
View 1 Replies View RelatedI've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
View 5 Replies View RelatedI am completely new to Ubuntu or any Linux based OS whatsoever, so excuse me if I sound retarded. I recently installed Xubuntu to an old laptop of mine and everything went fine except for the fact that I had to install a WiFi driver; I liked Xubuntu so much that I decided to go ahead and dual boot Ubuntu on my WIndows 7 machine. After I installed Ubuntu, I realized that I was stuck in 800x600 resolution and I was unable to run the resolution in 1920x1080 like I should be able to. I tried to uninstall and reinstall Ubuntu and I had the same thing happen. Most of the other help forums I had searched claimed that I needed to check my Xorg Config, but I don't know how to do that. Also, I get a "too many connections" message every time I start in Ubuntu; could this possibly be related?
[Code]...
Quick update: Ubuntu will not let me use the "extra visual effects" option for my desktop appearance. It stars searching for a driver then doesn't let me use the enhanced visuals. This leads me to believe that it's a driver issue. How can I tell which driver I am using in Ubuntu????
im running virtual box on an iMAC and when i boot up fedora it only lets me put the display upto 800x600 so its very hard to see and it wont let me select any thing besides like 600x400 or 800x600
View 2 Replies View RelatedContinuing with my 11.3 install on an old Toshiba Tecra M1 laptop:
When i was installing, i had the options of 1600x1200, 1280x1024, 1024x768 etc.
I chose the 1024x768, because it fit the laptop screen perfectly.
But after the installation, the highest resolution i get is 800x600, and it's wasting a bunch of real estate on the screen.
I mean, if during installation it could do 1024x768, why not after the install? obviously the graphics card supported it.
So I installed Project64 (For those who don't know it is a Nintendo 64 emulation program so I can get my Mario fix), Which I always read is hard to put on a Linux. I didn't think I had WINE so I ran $ whereis wine and I guess I do. But I never set a config for it, So I don't get how an install through wine would work. How was the .exe read?, Because I thought wine had to run to read those, and I don't think it ran. At least there was no visible sign when I installed.
||-2nd part-||
I got my Project64.exe, put it in a directory I made, did the $ ch commands to change permission , did $cd <dir> then I ran ./Directory:$ Project.64.exe 'gamefile.z64' and it seems to work fine. Except for it leaves the display as 800X600 after I close it. Why is it changing display size, and not returning to my default and can I make it stop doing it?
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies View RelatedIn my laptop i have an ATI radeon HD 3200 , I installed Fedora 10 and also the fglrx driver I have 3d acceleration and works well. The problem is that the display makes a weird sound when i use a resolution higher than 800x600, and the display appears like "Unknown". The Display is a : 14" HD Acer CineCrystal LED LCD.
View 4 Replies View RelatedI am RHEL 5. I just installed it and when i try to config display it how only two resolution by default 640x480,800x600.No other resolution option is shown. I tried by editing xorg.conf but of no use.
View 2 Replies View RelatedI'm a faithful user of Ubuntu Linux, especially 9.04 Jaunty Jackalope. I have a problem with my screen resolution on my LG Flatron L1718S. It's a 17 inch and its recommended resolution is 1280x1024.I was on this resolution all along until now. Now I'm limited to 800x600 resolution. Here's what happened. Before installing Ubuntu 9.04 on a friend's computer, I put in his Seagate 40 Gig hard drive into his Intel Celeron Box with a 2.93 GHz and 512MB ram. I then plugged my monitor into his system. Upon booting, I discovered that the hard drive had a very strange looking operating system called OS2 Warp...seemed like Black XP to me. On the desktop, the icons were so big and bloated,the mouse was frozen, there was so much eyecandy which demanded so much graphics resources.
His graphics card is an onboard one, framebuffer. I then rebooted the machine, this time running the Ubuntu 9.04 live CD. Resolution still ok, with 1024x768 this time. I installed Ubuntu 9.04 and finished. I shut down the machine, unplugged my monitor and plugged it back into my machine, which is a Intel Celeron with a 2.4GHz processor, 1,5GB RAM, 80GIG X 2 Seagate IDE hard Drives, 2 DVD Drives, an LG Spermulti-DVD rewriter and a BENQ DC W2000 rewriter.My graphics card is NVidia GeForce NV34 FX5200 Series, 256MB RAM Graphics Card. Suddenly everything on the desktop is so large, and the maximum resolution now is 800x600. It becomes 640x480 if i add Nvidia drivers, version 173. If I switch over to Windows XP, Service Pack 2, I have no resolution issues there. Nvidia drivers are loaded there as well. No issues with resolution there. To test the screen again, I plugged my monitor back into my friends computer that I mentioned earlier on. The resolution is stuck on 800x600. After plugging the monitor back to my computer, I tried to edit the X.conf using "sudo nano", adding the desired parameters, like undetected screen resolutions, monitor name, device,etc, but nothing worked.
I always had to resort to the backed up configuration file for XOrg. The latest Ubuntu 10,04 Lucid Lynx picks up my monitor with a maximum resolution of 1024x768.The Mandriva One 2008 Live CD also gave me the same result like Ubuntu 10.04, this time giving me more higher resolution options. Strangely enough, from my Ubuntu 9,04 and older, after several tests, the resolution is still stuck to 800x600. When I press the AUTO RESET button on my monitor, the screen says "Processing image Auto Adjustment-For Optimal display, change resolution to 1280x1024". A factory reset did not help. The resolution was perfect until I plugged my monitor into my friend's computer, the one with the 2,93GHz processor. I took another friend's monitor, a HP Cathode Tube Monitor, a 17 inch as well, and plugged it to my machine to test the resolution. The results were glorious! All resolution options were shown, from the lowest "320x240" to beyond "1280x1024". Plugged it back to mine, the same result showed: 800x600 resolution, the lowest being 320x240. I kindly ask for advice on how I can be able to get all the screen resolution options available on my Ubuntu 9.04, like before, because it shows the maximum of800x600, lowest- 320x240 on "display" in "System--Preferences".
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
I just added a nice little HDTV as a second display on my laptop, it worked fine but I found that the text was a bit hard to read so I decided to change it, got another one yesterday, just plugged it in and everything was perfect. Today I came back from work, plugged the laptop in the monitor, booted the machine, and got a wrapped display, the bottom part (about 1/4 of teh display) seem to be stuck with the content that was visible when I opened my session, and the top part is shifted up, making it totally useless.I took a picture of the display, you can see it here [URL]... I will try to see what happen if I put back the other display, but I really want to get working with the new one.
View 1 Replies View Relatedgot an acer aspire one zg8 running debian in a vmware enviroment i only have 800x600 and cant change resolution do i need to install linux drivers for intel 945 express vga card? i googled for drivers for vga card but linux and there were linux drivers,but it said linux 4 trying to get into linux.
View 1 Replies View RelatedI just installed Debian 5 onto an older PC and cannot get a better resolution than 800x600. The PC is currently dual booting with Windows XP and in Windows I can get the resolution to 1280x768 without any issues. I checked the device manager in Windows and the video card shows up as VIA/S3G Unichrome II. What do i need to do to get this working at 1280x768 in Debian? I had Mint installed previously and it got to this resolution fine until I upgraded it to a new version, then it was stuck at 1024x768.
View 3 Replies View RelatedI've just upgraded a server to Lenny; everything went smoothly I'm glad to say, except that now my version of PHP is 5.2.6, and I want 5.2.9.
Here's my sources.list:
I am finding the following problem. Just wanted to know anyone else has experienced these types of issues.My laptop is debian squeeze x86 with custom 2.6.34.1 hand compiled kernel whereas the desktop where I am doing ssh is a dual boot system with debian squeeze x86_64 with custom 2.6.34.1 kernel and ubuntu 10.04 x86_64. Whenever the desktop is running ubuntu, there is no problem with ssh. But when it is running squeeze many times ssh hangs, just after issuing the command. Sometimes it asks for password and then do nothing, otherwise it just remains at the ssh line itself Even the escape (~.) does not have any effect on that. Only thing possible is to kill the ssh process. There used to be no problem last week, but I think after an upgrade either on laptop or desktop, things went this way.
View 3 Replies View RelatedI have the problem of app stalling at 0% when trying to update. I ran apt with the debug option
apt-get -o Debug::Acquire::http=true update
And I get the following:
Code:
Select all0% [Trabajando]GET http://security.debian.org/dists/wheezy/updates/Release.gpg HTTP/1.1
Host: security.debian.org
Cache-Control: max-age=0
User-Agent: Debian APT-HTTP/1.3 (0.9.7.9)
GET http://ftp.mx.debian.org/debian/dists/wheezy/Release.gpg HTTP/1.1
Host: ftp.mx.debian.org
Cache-Control: max-age=0
User-Agent: Debian APT-HTTP/1.3 (0.9.7.9)
After a while trying to update, it trows out this error:
Code:
Select allIgn http://ftp.mx.debian.org wheezy-updates/non-free Translation-en
W: Imposible obtener http://security.debian.org/dists/wheezy/updates/main/binary-amd64/Packages 503 DNS error for hostname security.debian.org: Name or service not known. If security.debian.org refers to a configured cache repository, please check the corresponding configuration file.
[Code] ....
I have tried changing repos, also i have verified with iceweasel the availability of the repo.
Ihave changed aldo the network setting from dhcpd to static.
I am using Debian wheezy, gnome desktop enviroment, although the DE is irrelevant.
My conections details:
Code:
Select all
eth0 Link encap:Ethernet HWaddr 50:46:5d:b2:1b:2a
inet addr:192.168.2.14 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::5246:5dff:feb2:1b2a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:376446 errors:0 dropped:0 overruns:0 frame:0
[Code] .....
have installed warsow from synaptic & it's stuck in spectator mode.anyone know how to fix this so i can play?
View 1 Replies View Relatedi'm trying to Debian 8.1.0 on my notebook Acer Travelmate 2200. Currently i have very outdated version of Linux Mint. It works fine but I prefer keeping system updated. Only way to get updated system now is install new one, and here i have a problem. After CD/ISO booting, installation looking for a mountd devices, etc. then i got statement that CPU stuck for x sec. The same statement appears every 20sec. I was trying it on other linux distr's they give the same error. I didn't overclocked my notebook, his temp is ok. I'm working on it few hours each day, it didn't overheat. Someone told me thats bug of 2.6.x kernel but I'm trying install new system with 3.16.x.
View 4 Replies View RelatedI have an old laptop (Acer TravelMate 350TE) which I would like to turn into a router. So, I downloaded i386 - Small CD and installed to that computer. Setup finished, system restarted but computer stuck at grub screen. A menu comes like this:But neither enter button nor arrow keys are working. How can I solve this ?
View 4 Replies View RelatedBeen trying to follow this tutorial [URL] ..... and when I reboot and select the entry with Xen GRUB hangs at loading initial ramdisk ....
View 0 Replies View RelatedI cloned my disk that have dual boot in it clone the disk remove the old one put the new one so far okay. But when i put with the new disk to linux it goes to the emergency mode:
run fstab and this is my fstab results:
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=cd9637db-0479-4ef0-90fd-481a50e23060 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=df29ffb9-91a8-48d7-91cd-5e671b55677d none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=696FF92C4C532245 /media/Windows ntfs defaults,x-gvfs-name=Windows,x-gvfs-icon=%2Fhome%2Fdarkangel%2FDownloads%2Fwindows_hdd_icon.png,x-gvfs-show 0 0
I'm new to the world of linux I've started using it just one week ago.I installed Debian Lenny without problem, and after 2 or 3 days managed to make my wifi and ATI card to work. Today I tried installing compiz, through the packet manager that comes with the system. It was downloaded and installed successfully, so I rebooted to see it effects (I guess) but after that, I wasn't able to get to the login screen anymore, it just gets stuck at the "gray" screen before that (I took a pic of what screen i'm talkin about). Then I accessed in console mode and removed all the compiz packages, tried dpkg-reconfigure gnome and gnome-core, then reinstalled the ati drivers, but the problem is still there.I don't want to reinstall the whole system, I don't think a simple problem like this is enough to do so, but sincerely I'm completly lost.
View 14 Replies View RelatedI ran an update like I do every night and was informed that I have eight packages to be upgraded. I allowed the package manager to run these updates. However, it became stuck. The first thing to be upgraded is file-roller. I get the message "Unpacking replacement file-roller ..." and then nothing. I left it like this for about 30 minutes and then decided to stop it with ctrl-c. That didn't work. I rebooted and ended up having to fix the package manager as it was locked because it thought it was running. I tried to update again and after about ten minutes, it's still hung on the same spot.
View 2 Replies View Related