On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 RepliesAs we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
I'm on a T42 laptop with a Samsung ML-1740 attached on my USB port. I installed the printer with the tool and everything seemingly went okay. Won't print, tho. I read somewhere on fedora's pages (prob the forum) that someone had a similar prob and it was a matter of loading foomatic, whatever that was, then retrying the load. It worked for them. Anyone aware of this?? Or is this a simple fix? I used the recommended driver for ML-1740 listed in the GUI.I have to reboot, I'll try to get a printout from troubleshooting.
View 4 Replies View RelatedUsing Fedora 14. Printer usb connected and recognised with correct driver: Foomatic/PXL mono (Recomended). Will not print test page or anything else. Nothing seen in print queue.Iinitially choked by SElinux (since deleted). Still not working.
View 2 Replies View RelatedI upgraded from 10.04 and I like 11.04 alot. I had a slight problem with wireless but got that ironed out. My LIDE 210 scanner now works too. But my Samsung ml-2250 printer is not working properly now when it was in 10.04.
If I print out any type of document it runs through all the paper in the tray. I printed out a test page and the actual test page had a bunch of characters in one line at the top, then one line below that it said "you are using the wrong driver".
I've reloaded the splix in synaptic twice for samsung drivers but still the same results. I have no idea what 10.04 used for drivers. Also, I can stumble my way around Ubuntu in the terminal, but best to just think of me as a noob.
I already noticed that others had similar problems with other Samsung scanner / printers. I could not find any solution in any threads (other than going back to 11.2 or buying a printer from a different vendor), so I'll ask again here: I'm running openSuse 11.3 on a 64 bit system.
Here's some error log output from CUPS:
E [20/Mar/2011:15:22:35 +0100] [Job 62] Failed to load the PPM image
E [20/Mar/2011:15:22:35 +0100] [Job 62] Job stopped due to filter errors; please consult the error_log file for details.
D [20/Mar/2011:15:22:35 +0100] [Job 62] The following messages were recorded from 15:22:34 to 15:22:35
[code].....
Has anyone had issue with this card on kernels since 2.6.31? I updated my system in November and the card stopped working, rather than simply revert to my previous kernel i contacted highpoint (HPT) and asked if they would be updating their open source driver soon, they got back to me and said they were developing something... so i kept my system upto date and waited. now they say they will not be updating any time soon. i have tried installing older kernels but it seems that something else is wrong and the card will wind up beeping after about 30 - 45 mins of loading a compiled module.
I was wondering if anyone knows enough about the drivers to perhaps modify the opensource driver to work with newer kernels. or really if anyone else has issue with HPT controllers? as of right now my only option is to wait until highpoint develops an update since nothing i have tried will let the card work properly.
i don't suspect anyone will have any serious issues but i thought this is my next best bet (to waiting)
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies View RelatedWe developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies View RelatedI expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
Tried installing all the Samsung ML-**** from the list. PS Getting really tired of booting XP every time I want to print something.
View 3 Replies View RelatedI have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies View RelatedI have F15 fresh install on Samsung Q45. The brightness function key is recognized but doesn't really increase or decrease brightness. It is set to maximum.There was a workaround in F14 for same problem.
View 1 Replies View RelatedI want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
It looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View RelatedHow can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
I have a MacBookPro5,1 laptop, and I have installed the 64-bit version of Fedora 12 on it, in addition to the Mac OS X operating system. When I'm running Mac OS X, I can connect my 720p Samsung television to the computer through its mini DVI port and the computer will go into a mode that will display on the television.
However, when I'm running Fedora and connect the television nothing happens. What can be done to allow the laptop to display on the television when it is using Fedora?
wireless not working in Samsung notebook RC520
View 5 Replies View RelatedI want to upgrade my Samsung Galaxy Gio S5660 to Gingerbread XXKPA 2.3.3 Firmware. I now have Froyo (Android 2.2) and want to update my Androidsystem to Gingerbread. This can be done in windows with some windowsprogram named Kies, but I only have my Fedora 14 installation on my PC. I now wonder if it is possible to do this firmware upgrade with F14 ?
View 2 Replies View Relatedi have a server built out using a minimal f15 installation. when i connect my samsung galaxy s2 via usb i see the following in the syslog :
Aug 10 09:31:43 server kernel: [593577.329268] usb 2-1.2: new high speed USB device number 17 using ehci_hcd
Aug 10 09:31:43 server kernel: [593577.405527] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=685e
Aug 10 09:31:43 server kernel: [593577.406045] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code].....
and can access the storage. when booted into the minimal installation, other usb devices such as usb sticks can be accessed and mounted successfully. what i'm missing from my minimal installation that is preventing the samsung storage from being accessible ?
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies View RelatedI have installed Fedora 12 with latest updates. My problem is printing from Winstar Networking USB 2.0 Server (WS-NSU62P). This device is attached with LAN cable to Windows XP machine. HP LaserJet 2200d is connected on WS-NSU62P with USB cable. This printer works fine with Windows clients (when you add printer with standard procudure for WinXP OS). Before adding the printer I have to install some drivers witch i found on install cd. I didn't found any drivers for Linux. Specification has info about supported protocol on WS-NSU62P (Network Protocol IPX, TCP/IP, NETBUEI, APPLETALK, LPR, smb (Over IP)
How to set my Printer configuration in Fedora 12 to enable printing from HP LaserJet 2200d connected on Winstar Networking USB 2.0 Server (WS-NSU62P)?
Acknowledges that it is there, and that it is the primary but wont print. SimpleScan works like a charm.
View 1 Replies View RelatedI have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
View 2 Replies View RelatedAfter the usual mild annoyances inseparable from a Fedora release (installation from the LiveCD worked OK, but generated a requirement for 162MB of day-one updates, followed by something like 150MB of downloads to install OpenOffice - which comes as standard with Ubuntu/Mint/Mandriva and, no doubt, many other distros) I have been able to get the system working reasonably well. If there are major performance gains from the use of ext4, I have been unable to detect them. However, the only really frustrating issue from my perspective has been the difficulty in getting my two printers (both of which worked straight out of the box in the other distros mentioned above) to actually print. The devices in question are a Brother 2140 laser printer and an HP 2280 multi-function inkjet.
Both of these devices were properly recognised by the system, but neither would actually print (there were some initial signs that action was imminent, but no result - the printing processes were finally shown as having been stopped). I removed both printers, and started from scratch. The laser printer could not be persuaded to work, either with the recommended 2170 driver or the old faithful 2060-gutenprint driver. However, when I tried to add the HP, the printer utility advised that I needed to install "hpijs" before proceeding. This I duly did, and the HP 2280 then worked fine. On the basis that my only aim was to get the printers working, I decided to ignore the recommended drivers for the Brother 2140, and select the "2060-hpijs" version. This worked fine, and others may like to try this workaround.
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
View 1 Replies View RelatedNot sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
Anyone knows how to do borderless printing with HPLIP? I have an HP Photosmart C5550. On XP it is able to print borderless (without the white edges on 4 sides) on letter size (both plain and photo paper),but in F13 I always have a white border (~5mm or 0.2 inch) on the 4 sides of plain or photo paper.
Some old postings around 2008 said I should
- run hp-toolbox
- select "Print Settings" tab
- choose "fullbleed" (eg. 1200dpi fullbleed) in "print quality".
When I tried to follow this posting, I see no "fullbleed" selection in F13. Did I miss anything?
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies View RelatedI have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
View 2 Replies View Related