Fedora Networking :: Samsung N130 Realtek 8192 Doesn't Work In Fedora 12
Apr 2, 2010
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
Has anybody been successful in getting a N130 with a RTL8192E wireless chip to access the internet? I�ve tried practically every suggestion quoted on this message board �downloading drivers, from Samsung and Realtek which won�t open also linux versions with the same result, trying the Ubuntu compilation of Wine etc, etc. Am about to give up, which is a pity, because the Netbook version Ubuntu is very user friendly.
I'm trying to install a wireless USB adapter to a machine so I can get it internet access, unfortunately when I try to run the provided install script I'm getting an error 2, and I've never encountered that before. In fact I'm getting another error which makes me concerned that they just failed at coding this driver...
Code: /tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c: In function 'LeaveAllPowerSaveMode': /tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.c:712: error 'HAL_DATA_TYPE has no member named 'autosuspend_disabled' make[2]: *** [/tmp/driver/Linux/driver/rtl8192CU_linux_v2.0.1170.20101112/core/rtw_pwrctrl.o] Error 1 make[1]: *** [_module_/tmp/driver/Linux/driver/trl8192CU_linux_v2.0.1170.20101112] Error 2 make[1]: Leaving directory '/usr/src/linux-headers-2.6.32-28-generic' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg
Something is clearly broken but I am not sure what, I'm awfully new to this, and wireless didn't really exist the last time I used Linux...though this doesn't appear to be specifically related to the wireless function of the driver, it's a make compile problem, it's just mysterious.
I've just installed Ubuntu 10.04 on my samsung n150. It has the 8192 device in it. Have installed ndiswrapper, however cannot get the drivers for it. How to fix/where to get the driver from so I can get my wireless card working again.
On lspci: 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I think the driver may be there, however I just can't 'enable' it. On my laptop there is a blue light saying that wifi is enabled however who knows.
I'm having trouble with my Samsung Netbook N220 and its Realtek 8192 wireless card and could use some help with diagnostics. I would like to use the netbook as a server and after a day or so the system stops responding. What I'd like to know:
- What do the "========>ieee80211_parse_info_param(): athros AP is exist" spam messages actually say? Does anyone else have this and stability problems?
- Why is the realtek driver package not working?
I'm running Ubuntu Netbook 10.04/Kernel 2.6.32-24-generic. Initially the card was unable to connect, so I installed the Realtek driver rtl8192se_linux_2.6.0017.0507.2010 which adds a kernel module r8192se_pci.ko. At first my system was hanging during bootup. I then restored /lib/modules/2.6.32-24-generic and now the card is connecting but the system is unstable. The 2.6.32-23-generic kernel, modules listed below, still has modules as installed by the realtek driver and is not working. Below the drivers supplied by ubuntu
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
Installing Fedora13 Kernel 2.6.33 killed my RealTek NIC. I found the following page which helped a little bit: [URL]. Unfortunately the card still does not work.
If I do lsmod | grep r81 I get: r8168 91833 0
So I am not sure the really the new module is loaded. Doesn't anybody have the realtek working with fedora13 ?
I installed F10 today. From live-usb wlan worked fine, but after installing it doesn't find any networks. I tried to google this problem, but everybody says wifi works out of the box. Not for me.
Solved: I disappled wireless networking and appled it again. It found all networks.
I have installed Fedora 12 on my laptop.Installing my Broadcom BCM 4312 wireless drivers works just fine, but after a reboot I have to reinstall them. modprobe wl, modprobe wlan0 etc doesn't work either. I need to reinstall them every time I reboot.
I'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
how nobody else could have run into this in the meantime. [URL] Two friends of mine are having the same issue on Ubuntu-11.4-machines. In short: Connecting to the Cisco-VPN via shell-command "vpnc" works flawlessly, whereas NetworkManager just doesn't connect at all. We had this working in older versions of Fedora/Ubuntu about some months ago...
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
I can't use Network Manager (it continue to ask me for the WPA password9. So I stopped it and I use command line, following this: [URL]
From the log I can see that it tried to associate to AP and after a lot of tries: it connects BUT the connection is really SLOW and UNSTABLE! (pinging hosts on the same network gives me about 50% packets loss) I am worried about this entry in the log:
Code:
ath5k phy0: unsupported jumbo
I am going to try to install madwifi, but before that I'd like to have your opinion and listen your experience! I see a lot on infos about ath5k, but I'd like to be pointed to the right direction!
Struggled a little to get Broadcom driver working with my Dell laptop. But I am at a point where if I manually type 'modprobe b43' the wireless works. If I reboot, it doesn't work automatically and I have to 'modprobe b43' again. Any ideas what I am missing here?I can't seem to figure out how to get this to work automatically. I did check to activate device when computer starts in network manager
I cannot get static addresses to work on eth0 and eth1. eth0 seems to use DHCP while eth1 uses the static information. Sometimes the static info is used but the interfaces get the addresses reversed.
From /etc/sysconfig/network NETWORKING=yes HOSTNAME=mosaic
I have just updated KDENetwork to this level and now my F10 doesn't find any wifi connection. By the way, I have been working with F10 for some months without any problem on wlan.
iwconfig now says:
wlan0 IEEE 802.11bg ESSID:"" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=0 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B
I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.
I find it very frustrating that documentation suggests using PEERDNS=no in /etc/sysconfig/network-scripts/ ifcfg-eth0 in order to override resolv.conf information only to find out that both NM and network init scripts ignore DNS1, DNS2 and DOMAIN settings.So my question is how do I correctly configure resolv.conf settings that will persistently override dhcp information on a F12 system that has NM removed and uses the network service scripts?
I'm new to Fedora and have a problem with the network manager. Everytime I start Fedora, it does not automatically connect to the default WIFI Browsed Google and just found [URL]..
I recently installed Fedora 15 x86_64 on my new AMD Machine and I'm quite pleased with things thus far.Here's where my problem comes. I mainly bought that machine to help me with Development. More specifically, Virtual Machines for testing purposes. I have installed Fedora 15 x86_64 as a qemu-kvm Virtual Machine and it's working.. for the most part. I am having a whole lot of trouble getting it to connect to the Internet.
My guess is the only way I'm going to reliably do that is to setup a Bridge. Yes/no? However, in order to setup a Bridge I need to disable NetworkManager and that where the fun happens. It completely disables my network connection. I'm probably missing something small, but I can't figure out what I'm missing. I've double checked my ifcfg-em1 multiple times(I've been trying for ~24 hours so far) and all the settings are as they should be.
I've turned NetworkManager off and stopped it(chkconfig and service) and turned network on(chkconfig and service). Theoretically I should simply need to turn off NM and turn on network and things should be fine. no?
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
The auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor Code:
pppoe-connect commands work. When I type Code: pppoe-connect , it says Code: /usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT "$@" > /dev/null 2>&1 . When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
I just checked the Realtek website and they have a new Linux Driver for the RTL8185. The new driver is dated 6/26/2009. So it is quite recent. I would have thought it might have gotten into FC11.
I have 2 questions. Has anyone tried it? What would be the steps to install it?
