OpenSUSE Install :: Live CD - Can't Print Via Samsung ML-1740?
Jan 5, 2010
I'm on a T42 laptop with a Samsung ML-1740 attached on my USB port. I installed the printer with the tool and everything seemingly went okay. Won't print, tho. I read somewhere on fedora's pages (prob the forum) that someone had a similar prob and it was a matter of loading foomatic, whatever that was, then retrying the load. It worked for them. Anyone aware of this?? Or is this a simple fix? I used the recommended driver for ML-1740 listed in the GUI.I have to reboot, I'll try to get a printout from troubleshooting.
View 4 Replies
ADVERTISEMENT
Nov 1, 2009
On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Jul 27, 2010
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
View 3 Replies
View Related
Jul 23, 2010
I have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies
View Related
Aug 9, 2010
Environment: Debian Lenny | Samba/CUPS | Network: 25 Workstations (WINXP SP3) | Printer: Samsung ML2010 (on server) That�s it. Problem: All workstations can print, except two. I formated the two workstations, installed everything again and nothing!
View 2 Replies
View Related
May 23, 2011
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies
View Related
Sep 4, 2010
I needed to load Linux on a Samsung Q1Ex for a project I'm contracting on, and could not for the life of me get anything to run. Turns out that the video card is a chrome relative, and for some reason, almost every distro out there (I usually use debian for this sort of project - ie, no money, but use SLES at my day job) failed to even get to textmode console. Trying several distros, I finally put it out there and used OpenSuse and voila!, vga was working. After that, I got X running, and many hours later had the mouse working. The key to this device is Windows. I ended up parsing through the registry looking for "touch" and found that the software in use on Windows is eGalaxTouch. A quick google brought up their site where I found several Linux drivers. I used the beta mode drivers to get the mouse working. Here is a more detailed breakdown.
Use OpenSuse 11.3 (I used the full blown disc - its is the only distro I could get to boot correctly as the others all used OpenChrome, while OpenSuse seems to use fbdev - note here that installing the unichrome drivers will actually break X and cause you to have to reboot to get away from the mess on the screen). Use eGalaxyTouch drivers. The pdf's included in the download have step-by-step instructions but the big pieces are the setup.sh script and the serio_raw steps (note if you perform a 'hwinfo --bios | more' you can figure out which /dev/input/event* you're using - for me it was event1 and serio4). Note also to choose PS/2 when executing the setup.sh script provided in their download. eGalax_eMPIA Technology Inc. TouchKit Linux Driver Here is my xorg.conf now:
Section "ServerLayout"
InputDevice "EETI" "SendCoreEvents"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
On the video, just stay with the fbdev and you should be good. So far, I've had KDE, Gnome, TWM all running; and now have my EFL apps running! Woohoo! Next piece of the puzzle is to verify sound, but on the face of it, looks like the system recognized it off the bat. And of course one other note. 11.3 is going to make me a convert!
View 1 Replies
View Related
Aug 1, 2009
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies
View Related
Mar 13, 2010
Has anyone had issue with this card on kernels since 2.6.31? I updated my system in November and the card stopped working, rather than simply revert to my previous kernel i contacted highpoint (HPT) and asked if they would be updating their open source driver soon, they got back to me and said they were developing something... so i kept my system upto date and waited. now they say they will not be updating any time soon. i have tried installing older kernels but it seems that something else is wrong and the card will wind up beeping after about 30 - 45 mins of loading a compiled module.
I was wondering if anyone knows enough about the drivers to perhaps modify the opensource driver to work with newer kernels. or really if anyone else has issue with HPT controllers? as of right now my only option is to wait until highpoint develops an update since nothing i have tried will let the card work properly.
i don't suspect anyone will have any serious issues but i thought this is my next best bet (to waiting)
View 2 Replies
View Related
May 31, 2011
I am trying to install a file and print server for backup and storage using an opensuse 11.3 live CD but the CD loaded the complete desktop. How do i pare this down to a server install? Do I need to reinstall? I have a mixed network of opensuse, Ubuntu, and Windows 7.
View 5 Replies
View Related
Jul 27, 2010
When installer is loading linux kernel and it goes to 100%, the next thing that I can see is black screen and can just use shut-down button. This situation appears about 90% tries. After 7 reboots I installed Suse successful but the problem appears also now. Just after select Suse in GRUB, the screen print some text about half a second and it goes black. Sometime I can start system normal. I use openSUSE 11.3 Intel Core 2 Duo 2GHz, 4gb ram, Geforce 8600M GT graphic card
View 6 Replies
View Related
Sep 16, 2010
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies
View Related
Jul 18, 2010
I am trying to create an usb install from an gnome-live cd. All I have done is not working:
dd
fedora liveusb-creator
fusbi
linuxlive usb creator
unetbootin
pendrive
All I can get are errors saying cang find kernel or error like that. I have used linux and windows environment. The iso I am using is fine, I am sure because I have instaled it on two pcs. Iso gnome-live >> usb (bootable to install)
View 1 Replies
View Related
Dec 14, 2009
I have a non-broadcast network (ad-hoc?) that I attempt to connect to via openSUSE 11.2 running off live USB. It does nothing. It never connects and when I view it with available networks it just shows the name and "insecure" (even though it's WPA2Personal) and no percentage.How do I get wireless to work?
View 4 Replies
View Related
Dec 14, 2009
I downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies
View Related
Mar 16, 2011
I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
View 1 Replies
View Related
Jul 11, 2011
I have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I don´t know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I don´t know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
View 9 Replies
View Related
Mar 6, 2011
I downloaded the latest OpenSUSE LIVE CD and burnt it with Nero at 4x speed and there was no errors.
I booted the CD up and I hit Run Live CD, I come to errors
ID "1" Respawning too fast: Disabled for 5 minutes
ID "2" Respawning too fast: Disabled for 5 minutes
ID "3" Respawning too fast: Disabled for 5 minutes
ID "4" Respawning too fast: Disabled for 5 minutes
ID "5" Respawning too fast: Disabled for 5 minutes
ID "6" Respawning too fast: Disabled for 5 minutes
I am not sure what to do as I want to use OpenSUSE,
View 2 Replies
View Related
May 11, 2011
I have made many attempts at getting the live CD to boot from a usb key with no success. I have read the various tutorials, including a kiwi method. There seems to be something missing.
What (and where) is the executable file that boots the system? I used the Imagewriter to create my key. It has a syslinux.conf file but I see no executable called syslinux. I see nothing in the boot folder that is executable either.
The tutorial that has the imagewriter method has little detail. The kiwi tutorial has exquisite detail but it applies to kiwi and I can't figure out how to "translate" it. There must be something very simple that I am missing. I tried this on 2 different machines and it failed 2 different ways.
View 2 Replies
View Related
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
View Related
Jul 20, 2010
I am currently running 11.2 on my PC and have been doing so since it was released with no problems. When I try and install from my DVD (MD5sum and media verified) all goes well until the installer gets to the "searching for linux partitions" bit and then it dies completely. I have tried installing from a KDE and GNOME live CD and they both boot cleanly and load a usable desktop in both cases with internet access and all my Windows and openSUSE 11.2 partitions visible and browsable.
When I try to install from either of these discs Yast2 gets loaded and then just dies. I am at a total loss as to how to progress any further. Incidentally Fedora 13 won't install either so I suspect it is a kernel issue as my hardware has not changed since I installed openSUSE 11.2. I have been using SUSE since 10.0 and have never has any problems installing before now.
View 9 Replies
View Related
Jun 26, 2011
I tried installing 11.4 from the live CD on a new motherboard (ASRock N68C-S UCC) and the very first screen (license agreement) comes out so garbled that I can not read anything from it. I tried to run rather then install from the live CD, with the same result.
Hitting F3 and changing the resolution to 800x600 still did not fix this. I find it surprising, because I would expect the installation process to use low quality graphics and therefore not be too bothered about the specifics of the graphics chipset (NVidia GeForce 7025 / nForce 630a in this case).For reference the machine has 1 GB ram.There is no such problem with the 11.3 live CD, which is what I ended up using. So no problem in terms of getting the PC up and running.
View 9 Replies
View Related
Apr 26, 2010
way to install applications onto a OpenSuse Live DVD. For example I want to install Sophos for Linux onto a Live DVD so that a disk less PC can be booted from CD and then used to scan other CDs or USB keys. The Sophos product is not distributed in RPM format and so SuSE Studio won't work.
View 3 Replies
View Related
Dec 4, 2009
ok after pouring over the internet for the last three days i give up and im asking for help i just did a live upgrade on my suse box taking it from 11.1 to 11.2 and fallowed all the steps in the doc it all went fine except after it was finished i can no longer access the internet
Code:
dracula:~ # ping google.com
ping: unknown host google.com
dracula:~ # ping 4.2.2.2
PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data.
64 bytes from 4.2.2.2: icmp_seq=1 ttl=57 time=12.3 ms
[Code]...
so i know the internet will pass throw it but it will not reslove the hostnames in links ping or zypper
View 7 Replies
View Related
Mar 23, 2010
When trying to run the Live version of OpenSuSE 11.0 from a CD, I can run from the command line, only. No graphics at all. No error messages. Tried some of the other suggested fixes on other threads, but nothing worked. The machine in an old HP OmniBook.
What I really want to do is reformat the HDD and install OpenSuSE on it, but the machine has no DVD drive, so I downloaded an iso image of the live version of 11.0 and burned a bootable CD. It boots, but I can get no X-Window, or the KDE desktop. I'd really like to convert this old machine from Windows 98 to Linux, but seem to have hit a brick wall.
View 9 Replies
View Related
Apr 5, 2010
Recently I have strange problem in my notebook HP2230s. I cannot boot from KDE 4.4 Live cd. I also try LXDE openSUSE 11.2 live cd, same result. I verify the MD5 and all the iso download is ok. I try the same cd to another laptop, Dell ATG, it works flawlessly.
So I thought there is a problem with my laptop BIOS. I download the new BIOS from HP and install it but the problem persist.
I have another live cd image that I made using susestudio, no problem with this one. I can boot it as live cd in my notebook.
View 2 Replies
View Related
Jul 21, 2010
I have netbook and i have been trying to install OpenSUSE from USB
the thing is installing from USB with Mint, I could install.
I have been using FUSB, liveusb-creator3.9.2, unetbootin and Univeral-USB-Installer-v1.7.2
is there any other way to install OpenSUSE onto my Netbook which does not have CD/DVD-rom?
View 3 Replies
View Related
Jul 30, 2010
I'm trying to boot the KDE 11.3 Live CD and it hangs during the boot. With splash=off I see
Code:
/etc/initscript: line 77: /etc/sysconfig/ulimit: Input/Output error then a bunch of different Id numbers, for example...
Code: INIT Id 4 respawning too fast: disabled for 5 minutes and finally a few lines starting with a number (for example [100.676357]) and ending with
Code: [100.676357] lost page write due to I/O error on loop 0 and then it just loops between the respawn and write errors, as far as I can tell.
My system has a 1.8Hz processor, 1G of RAM and an integrated nVidea GeForce 6150 card, and I'm dual booting sidux and XP. I've checksummed the ISO file. I tried first with a 1G USB drive (Transferring the ISO via dd as per the openSUSE instructions) and then with a CD (burned at the lowest speed). I also tried the CD on a Gateway laptop running just XP and got the same errors. Boot parameters I tried were noapic, pci=nomsi, acpi=off, with no difference.
View 9 Replies
View Related
Aug 29, 2010
I'm working on making a system in suse studio, but I can't get into the GUI through normal means (as in using the live DVD) because it gives me a console. When i type "startx" i get an error based on signal 11 (or something)
I type kdm, and nothing happens. What should I do?
(p.s, this is with the USB raw image "burned" on. The DVD needs me to use no APIC)
View 2 Replies
View Related
