I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
Epson PX720WD Wireless Network Printing For setting up wireless printing for Epson PX720WD
System -> Adminstration -> Printing and click Add to select New Printer
Under Printer Type select Network Printer This will open a drop-down list. Select AppSocket/HP JetDirect
This will show two text boxes called Host: and Port: for Host: you need to put the IP address of the printer. Leave the Port: as the default 9100
You can determine the IP of the printer by pressing the Setup key on the printer, then select Network -> Network Settings -> Display Wireless Summary If the printer is currently connected to the network, it's IP address will be listed.
Enter the IP address and select Forward
Now you need to choose your printer driver.
Under Manufacturer choose Epson Now for Model you will choose Stylus Photo PX720WD
It will suggest that you use the Epson Stylus Photo PX72OWD Series-epson-inkjet-printer 1.0.0-1lsb3.2 (Seiko Epson Corporation LSB 3.2) [en] (recommended) driver. This is correct. Click Forward and Apply
Unless your have the drivers installed already ignore the driver setup just below:
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
I have a virtual Linux box with a static IP in the cloud.
I have remote sites that have networked PCs that normally act as terminals but also have more than one printer on the Windows Network.
I would like software on the Window's machine to access the known IP address of the server and advertise the printers on the network so they can be printed to with lpr or cups. I don't have a problem manually setting up the printers on Centos if that is necessary. (But I need to know how to do that as well).
I need to know if I can setup a VPN on Windows without it stopping regular internet traffic and how to do it.
I need to know all the steps (what to install, what to issue commands for) to make this happen without using a GUI if possible and if the GUI is easier I need to know which GUI to install.
I also do not have a problem with using a VPN router at the client side if that makes it any easier. Like a Cisco RV120W.
In short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
I am trying to get network printing using IPP working, as per tutorial by Swerdna Linux Printer Sharing: Suse/openSUSE 10.x 11.x IPP Print Server for Linux & Windows Clients I used to have it working fine using openSUSE 11.1, then I upgraded to 11.4 and haven't been able to get it working since.
I can ping the server ok (ping 192.168.1.30) but cannot connect from web browser to [URL] it says "The server at 192.168.1.30 is taking too long to respond." This is the same from any workstation, Windows or Linux. The printer works fine locally on the server box. I noticed that Swerdna's tutorial (which I used successfully to setup this on 11.1) hasn't been updated for 11.2 upwards, I noticed that a couple of files that needed to be changed previously I don't even have in my current 11.4 version, ie /etc/cups/mime.convs and /etc/cups/mime.types. I'm wondering if these are replaced by something else now, and if that has any bearing on my problem.
I am running Ubuntu 10.4 LTS . I wish to share files and a printer over my network, it is on my main computer running XP . my ubuntu can see the printer but it will not print at all, it has the drivers Etc but it will not print. the personal file share said that i do not have the right package installed, but not which one!
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
How can I do the printing job over the network .I have only one printer on my firm Its not network printer here whole system are in LAN how can i gain the printing job
The Hardware: Mac Mini late 2009 running 10.6.4 (Snow Leopard/OS X) Dell Dimension 2400 running Ubuntu 10.04 Lucid Lynx HP Photosmart C4680 multifunction printer/scanner/copier Canon PIXMA MX310 multifunction printer/scanner/copier/fax Netgear Wireles-N 150 router model WNR 1000v2
[Code]...
As the HP Photosmart printer is currently connected, it is visible over the network by the macintosh however will not print (all jobs appear in the macintosh's queue without a "hold" designation, printer not on pause. pause/resume only changes the tag on the printer but does nothing to cause the queue to begin printing). Although I can navigate within the printer setup to the existing printer on the network, I cannot connect the printer on the mac without finding a new "printer" instance on the Ubuntu machine when I get there. The printer instance which works is the one the Ubuntu machine created, and the printer instance which does not work is the one generated by the mac, which doesn't work either from the mac or when printed to from the Ubuntu machine, now that this instance exists there.
With the printer connected to the mac, it is visible over the network to the ubuntu box however asks for authentication for the print queue and will not accept any password established for either machine. It also does not specify what account name the password should match with so is an utter quandary.
lastly, I did run dmesg but the result was too large for my terminal's log and scrolling back through it I did not find a section relevant to the HP (or Canon) printer to post here.
From my Ubuntu Server 8.10, when i attempt to print to my network printer(Brother HL2700cn) it prints garbage and multiple blank pages. I also tried installing the Brother print driver (BR2700_2_GPL.ppd) as instructed, placing the file in directories: /usr/share/cups/model and directory /var/spool/lpd and restarted cups: /etc/init.d/cups restart. after all that, i get the same results, garbage and multiple blank pages. the printer has a static ip address
I have a recently installed dual boot system with Centos 5.2 and Fedora 10. I connect across a LAN to a network printer HP Laserjet 1320n I have been through the printer installation / setup on both systems Fedora works fine, Centos doesn't want to know. Sending anything to print just adds it to a queue that is never printed.
I have looked at the printer management through Firefox browser localhost.localdomain:631 If I send a test page from here (CUPS) it reports the document as printed, but the printer just sits there blinking an orange light indicating an error.
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
I have a HP c4100 series printer connected to my Ubuntu computer. This computer prints just fine. I also have a Windows Vista computer that's connected to the Ubuntu HP via CUPS (by installing network printer with path of http://xxx.xxx.xxx.xxx:631/printers/printername). This computer also prints just fine. My problem is I just got a new Windows 7 laptop, and connected it to the HP via CUPS the same way as the Vista machine. It installed fine. However the Win7 Laptop will not print. When I try to print, it acts like it is going to print, but never gives an error and the file never makes it into the printer queue (on either the win7 or ubuntu machines, i have tried printing with both queues open to see what happens).
Things I have already changed: On the Ubuntu machine:Changed all the printer settings on printer to allow any and all connections including printing from the internet. Edited the /etc/samba/smb.conf to allow CUPS printing and allow guest access On the Win7 machine:Fixed my LAN security settings (disabled require 128bit encryption, send LM and NTLM responses)
Reinstalled printer several times. I have googled this issue almost every day for a month and tried every setting that I have came across (changed them back if it didn't help). So far nothing has worked for me, and this is my last ditch effort to get this printer working. Does anyone know why I can not print from my Windows 7 machine to a printer connected to my Ubuntu machine? Especially when I CAN print from the UBUNTU and Vista machines.
I've run into issue on my Linux machine (running 10.04) when I want to print. When I go to System>Administration> Printing, I cannot find the printer connected to the network through my dad's computer, running OS X 10.7.
I can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631 Add Printer Device: Windows Printing via SAMBA Device URI: smb://UMBRELLA/SMOKE/HP3600 Make: HP Model: HP DeskJet 3650, hpcups 3.9.8 (en) Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
Our Company is using a ERP solution in linux platform, now we are facing a problem with remote printing Linux to Linux, Linux to windows and windows to linux
I have an EPSON LX1050 printer setup via parallel port in linux machine .Recently we purchased RTextPrinter driver (Text mode printing for the Java platform)
I can print java app via Linux Local system, windows local system and windows to windows .But Network printing isn't working
The following the java class path of local and network printer setup
I have a HP P1005, which is connected to my desktop computer. I have it configured using hp-setup and set it to share across the network. However no matter what I do on an other computer connected to the network I'm unable to detect the printer. With OS 11.2 it all worked smoothly and practically out of the box. Only need was to add CUPS as an allowed service. This option is taken out, apparently it posed a security risk beats me if you only allowed local traffic. In order to open up the port I added in the internal and external zone the following: code...
Still the printer is not detected. If I turn the firewall off on both machines, no printer. If I try to ping it from the host machine it asks whether or not I enabled the firewall (which is turned off!!).
cupsd is running on the server printer. Localhost:631 is correctly configured and printing from my desktop works fine.
Printer is connected via USB to server PC running OpenSUSE 11.1 Client PCs are running 11.1, XP, Vista No problem printing from the Windoze machines
Printing is trouble free with the 11.1 client's firewall disabled, but no printer is available with firewall running.
In hopes of diagnosing the problem I figured I'd open everything I could think of until the printer remained available with the firewall running. Then I planned to start removing exceptions one at a time 'til removing one caused the printer to disappear.
I've gone to Yast>Security and Users>Firewall>Allowed Services>External Zone and tried addingSamba Server NetBIOS server Samba Client Samba Server VNC
I'm trying to setup a cups printing server, but I want the default admin to not be root. Google has given me a couple hints and the cups administration page a little further but I'm now stuck at the end.What I want is a user called admin who belongs to the group printadmin as cups server administrator.What I have done1) I have created a local user called admin user yast user interface , and a group called printadmin. Added admin to the group printadmin2) I changed the line in /etc/cups/cupsd.conf.SystemGroup sys roottoSystemGroup printadmin 3) Changed all instances of of Authtype from Basic to Digest (Allows me to have a file called passwd.md5 in /etc/cups/ with the name of the allowed cups admins inside)4) Ran the following command to create and add admin.Code:lppasswd -a -g printadmin dmin This is what I receive after running the commandlppasswd -a -g printadmin administratorEnter password:Enter password again:lppasswd: Die Kennwortdatei wird verwendet!
I have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
We are attempting to convert our entire office over to Linux, however we are experiencing some printing challenges. We have a Sharp-AR-M205 connected to our network that handles the bulk of our regular printing needs. Linux picks this up from the network and installs the driver (Sharp AR-M205 Foomatic/pxlmono (recommended)) without difficulty. We can print from gedit & OpenOffice without difficulties. The difficulty is when printing images, webpages with image content, or PDFs.
Then the printing spool goes into "LPR ..." printing mode and takes between 5-20 minutes to print a single page. This is particularly problematic as each week we put out a simple publication for our organization, designed in Scribus, outputted to PDF and sent to the printer from 200-300 copies. Our workaround has been to leave a workstation as an XP machine to print the PDF each week.
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
