Fedora Hardware :: Highpoint RAID 1740 And F2.6.32?
Mar 13, 2010
Has anyone had issue with this card on kernels since 2.6.31? I updated my system in November and the card stopped working, rather than simply revert to my previous kernel i contacted highpoint (HPT) and asked if they would be updating their open source driver soon, they got back to me and said they were developing something... so i kept my system upto date and waited. now they say they will not be updating any time soon. i have tried installing older kernels but it seems that something else is wrong and the card will wind up beeping after about 30 - 45 mins of loading a compiled module.
I was wondering if anyone knows enough about the drivers to perhaps modify the opensource driver to work with newer kernels. or really if anyone else has issue with HPT controllers? as of right now my only option is to wait until highpoint develops an update since nothing i have tried will let the card work properly.
i don't suspect anyone will have any serious issues but i thought this is my next best bet (to waiting)
View 2 Replies
ADVERTISEMENT
Oct 20, 2010
I've been, for some years, an happy user of Highpoint HPT374 based RAID cards, using RAID 5 with decent performances (constantly around 90 MB/sec in read, and 60 MB/sec in write ). Old Athlon mobo , with 2.6.8 kernel. Now the mobo is dead, so I've got an Asrock A330GC (dual proc with 4giga ram), installed Debian with kernel 2.6.26 and moved the controller and disks , and the performances have dropped to a painful 9 MB/sec in write, measured with dd of a huge file (interrupted with kill -USR1 [pidof dd]).
Read performances are still around 90MB/sec, using hdparm -t , repeated many times , figures are constantly around 90MB/sec. I suspect some libata issue , in old kernel the raid was seen as hdb, now is sdb, some driver(s) of the PATA disks may be responsible. I've used the driver, from Highpoint v2.19 , the latest driver is broken (causes kernel oops during format of raid), I've informed Highpoint.
Here some info :
hdparm -i /dev/sdb :
HDIO_GET_IDENTITY failed: invalid argument .
lspci :
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) .....
View 2 Replies
View Related
Nov 1, 2009
On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies
View Related
Mar 23, 2010
I'm currently in the process of getting my server moved over from a Server 2003 machine to one based on Fedora 12. My issue is that I have an existing RAID5 array on a rr1740 card. When I install this in the new system each individual drive show up as sdc sdd etc not as one volume. I have tried installing the highpoint driver but I get an error that sata_mv cannon't be unloaded. I have tried adding this to /etc/modprobe.d/blacklist to no avail.
System currently looks like this. ASUS mini ITX Atom D510 based board with 2x on board SATA, attatched to these are a 160GB OS drive, 400GB data drive. Highpoint RR1740 PCI card with 5x500GB drives in RAID5.
View 3 Replies
View Related
Mar 22, 2010
I'm currently in the process of getting my server moved over from a Server 2003 machine to one based on Fedora 12. My issue is that I have an existing RAID5 array on a rr1740 card. When I install this in the new system each individual drive show up as sdc sdd etc not as one volume. I have tried installing the highpoint driver but I get an error that sata_mv cannon't be unloaded. I have tried adding this to /etc/modprobe.d/blacklist to no avail. System currently looks like this. ASUS mini ITX Atom D510 based board with 2x on board SATA, attatched to these are a 160GB OS drive, 400GB data drive. Highpoint RR1740 PCI card with 5x500GB drives in RAID5.
View 3 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Jan 5, 2010
I'm on a T42 laptop with a Samsung ML-1740 attached on my USB port. I installed the printer with the tool and everything seemingly went okay. Won't print, tho. I read somewhere on fedora's pages (prob the forum) that someone had a similar prob and it was a matter of loading foomatic, whatever that was, then retrying the load. It worked for them. Anyone aware of this?? Or is this a simple fix? I used the recommended driver for ML-1740 listed in the GUI.I have to reboot, I'll try to get a printout from troubleshooting.
View 4 Replies
View Related
Jun 10, 2011
I'm trying to get my Highpoint 2680 working on OpenSuse 11.4 I need to make a driver for this because Highpoint doesn't have one for 11.4. I downloaded an open source driver from the website of Highpoint you can find it here. First of all I installed this with Yast: gcc, binutils, make, kernel-source, kernel-syms en linux-glibc-devel After this was done I unpacked the tar file with the open source driver in it and did this:
[Code]....
View 1 Replies
View Related
Jun 24, 2009
I've tried to install Fedora 11, both 32 and 64 on my main machine.It could not install as it stops on the first install window. I've already filed a bug but really haven't seen any feed back yet.The bug has something to do with Anaconda and the Raid array but I really can't tell.
I have an Intel Board (see signature). I am running intel raid software under W7 currently.It works fine. But, I'm wondering, when I attempt to install F!!, is my current raid set-up causing problems? Do I need to get rid of the intel raid software and use a Fedor/Linux raid program to manage the raid array??
View 2 Replies
View Related
Feb 1, 2011
Could any RAID gurus kindly assist me on the following RAID-5 issue?I have an mdadm-created RAID5 array consisting of 4 discs. One of the discs was dropping out, so I decided to replace it. Somehow, this went terribly wrong and I succeeded in marking two of the drives as faulty, and the re-adding them as spare.
Now the array is (logically) no longer able to start:
mdadm: Not enough devices to start the array.Degraded and can't create RAID ,auto stop RAID [md1]
I was able to examine the disks though:
Code:
root@127.0.0.1:/etc# mdadm --examine /dev/sdb2
/dev/sdb2:
Magic : a92b4efc
Version : 00.90.00
code....
Code:
mdadm --create --assume-clean --level=5 --raid-devices=4 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2
As I don't want to ruin the maybe small chance I have left to rescue my data, I would like to hear the input of this wise community.
View 4 Replies
View Related
Jul 18, 2011
I have a raid5 on 10 disk, 750gb and it have worked fine with grub for a long time with ubuntu 10.04 lts. A couple of days ago I added a disk to the raid, growd it and then resized it.. BUT, I started the resize-process on a terminal on another computer, and after some time my girlfriend powered down that computer!
So the resize process cancelled in the middle and i couldn't acess any of the HDDs so I rebooted the server.
Now the problem, the system is not booting up, simple black with a blinking line. Used a rescue CD to boot it up, finised the resize-process and the raid seems to be working fine so I tried to boot normal again. Same problem. Rescue cd, updated grub, got several errors: error: unsupported RAID version: 0.91. I have tried to purge grub, grub-pc, grub commmon, removed /boot/grub and installed grub again. Same problem.
I have tried to erased mbr (# dd if=/dev/null of=/dev/sdX bs=446 count=1) on sda (ide disk, system), sdb (sata, new raid disk). Same problem. Removed and reinstalled ubuntu 11.04 and is now getting error: no such device: (hdd id). Again tried to reinstall grub on both sda and sdb, no luck. update-grub is still generating error about raid id 0.91 and is back on a blinking line on normal boot. When you'r resizeing a raid MDADM changed the ID from 0.90 to 0.91 to prevent something that happend happened. But since I have completed the resize-process MDADM have indeed changed the ID back to 0.90 on all disks.
I have also tried to follow a howto on a similar problem with a patch on [URL] But I cant compile, various error about dpkg. So my problem is, I cant get grub to work. It just gives me a blinking line and unsupported RAID version: 0.91.
View 2 Replies
View Related
Jun 29, 2011
migrate an installed Ubuntu system from a software raid to a hardware raid on the same machine? how would you go about doing so?
View 1 Replies
View Related
Mar 22, 2011
How long does hardware Raid card (raid 1, 2 drives)take to mirror a 1 TB drive (500gb used)?Is there a general rule of thumb for this?4 hours? 12 hours? 24 hours?
View 1 Replies
View Related
Aug 3, 2010
I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
View 3 Replies
View Related
Nov 26, 2010
I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
View 6 Replies
View Related
Jul 18, 2009
how can I create RAID 1+0 using two drives (one is with data and second one is new). Is it possible to synchronize data drive with empty drive and create RAID 1+0 ?
View 3 Replies
View Related
Sep 2, 2010
So I decided to build a server using two HDDs and after checking the net I decided to go with Software RAID.Before I mess around and go ahead and buy two 500 GB HDD, I decided to try it out first in virtual box.(my system is F13 64bit with 4GB)
I set up a virtual machine with 2 X 10GB HDD.Mount the live CD (f13 32bit).Run regular install > choose custom layout and do as follows: SDA & SDB will both have Software RAID 500 MB and another software RAID of about 9500 MB I will have md0 /boot (sda1 & sda2 = 500 MB) And another md0 having LVM group loaded with / + SWAP I choose to install boot loader on md0 the first time and I receive the following error when I boot from HDD: FATAL: INT18: BOOT FAILURE I tried installing boot loader on sda same thing.
View 2 Replies
View Related
Nov 13, 2010
I hope this is the right section, it looks like though. I have a small nas ( via artigo a2000 ) with 2 sata hd 1tb each with raid 1 and lvm on top configured and working great.
sda1 and sdb1 ==> md0 raid1 for /boot
sda2 and sdb2 ==> md1 raid1 for swap
sda3 and sdb3 ==> md2 raid1 as physical volume then volume group and lvs on top ( / is a logial volume of these )
I wish to upgrade the current fedora 12 32bit installation I have on it doing a fresh install. But because I have a lot of data on md2 ( 600GB worth ) which I don't want to copy across somewhere else first, I need to know how ( i am pretty sure i can ) to mount md2 during the installation. This way I can use the data I already have on it.
View 3 Replies
View Related
Feb 28, 2011
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
View 1 Replies
View Related
Jun 12, 2010
I have two 1TB hard drives in a RAID 1 (mirroring) array. I would like to add a third 1TB drive and create a RAID 5 with the 3 drives for a 2TB system. I have ubuntu installed on a separate drive. Is it possible to convert my RAID 1 system to a RAID 5 without losing the data? Is there a better solution?
View 1 Replies
View Related
Dec 10, 2009
I am going to be using CentOs 5.4 for a home storage server. It will be RAID6 on 6 x 1TB drives. I plan on using an external enclosure which is connected via two SFF-8088 cables (4 drives a piece). I am looking to try and find a non-RAID HBA which would support this external enclosure and allow to use standard linux software raid.
If this is not an option, I'd consider using a hardware based raid card, but they are very expensive. The Adaptec 5085 is one option but is almost $800. If that is what I need for this thing to be solid then that is fine, I will spend the money but I am thinking that software raid may be the way to go.
View 3 Replies
View Related
Feb 2, 2009
Im having a hard time trying to change my raid configuration. Here is my situation:
A have two HDs that I configured in instalation time to work as raid squid proxy-cache. they are both 40GB. 40+40=80GB. So, I want to change it to two of 160GB. 160+160=320GB.
I have:
sdc1=40GB
sdd1=40GB
im adding / want:
sda1=160GB
sdb1=160GB
I want to remove the two 40GB and use only the two 160GB for my proxy. The thing is that when I remove the two 40GB, the system crashes at startup telling me that the raid cant be done then file system check fales too. Im wondering if there is a file a have to edit to change to point it to /dev/sda1 intead of /dev/sdc1 for example, so my system would start up looking for sda1(160GB) and sdb1(160GB) intead of sdc1(40GB) and sdd1(40GB).
View 6 Replies
View Related
Aug 11, 2009
I've been trying to setup RAID 10 with Fedora 11 on my desktop using this tutorial:[URL].. Everything has been going well, except when following the instructions and getting ready to format, it says I need to define / and boot partitions. This was never included in the instructions.
- LVM Volume Gropus
-- vg_jordan
--- fedoraRAID (type: ext4)
- RAID Devices
-- /dev/md0 (mountpoint/RAID/volume: vg_jordan ; type: LVM)
[Code]...
View 2 Replies
View Related
Mar 17, 2010
I just did a fresh install of Fedora 11 and added Raid 1 following this tutorial:[URL].. Now I see the filesystem when I open 'Computer' in the GUI, and I open it and see 'lost+found', but i can't write to the drive. The option is simply greyed out. And when I view Properties on the drive and go to Permissions, it says 'The permissions of {driveid} could not be determined.'
View 12 Replies
View Related
Jun 30, 2010
As I have not been able to resolve the problems with BackupPC after the upgrade (see post [URL]) it seems that my best option is to restore my system to the state when it was working OK and then do an upgrade to F13. I did a clean install when I upgraded to F12 and took the opportunity to reconfigure the disks to include some new drives into the RAID and LVM.
This means that the disks and partitions are not the same as when I was last running F10. I have the dumps taken at that time so I propose to install F10 from the DVD into the new structure and then restore the partitions from the dumps under single user. The new partitions are formatted ext4 and previously they were ext3, not sure if F10 supported ext4.
I know that there will be some directories and files which I must not overwrite:
/etc/fstab
/dev
some parts of /boot
I can do this with restore -i.
View 1 Replies
View Related
Sep 15, 2010
It's been a real battle, but I am getting close.I won't go into all the details of the fight that I have had, but I've almost made it to the finish line. Here is the set up. ASUS Z8PE-D18 mother board 2 CPU, 8 Gig Ram. I recently added an OCZ Agility SSD, defined a raid 1 virtual disk on the 1 terabyte WD HDD drives, which will holds all of my user data, the SSD is for executables.The bios is set to AHCI. Windows 7 installed fine, recognizes the raid VD just fine.
I installed Ubuntu 10.04 by first booting into try and mode, then opening a terminal and issuing a "sudo dmraid -ay" command. Then performing the install. I told it to install the raid components, and told it to let me specify the partitions manually. When setting up the partitions, I told it to use the free space I set aside on the SSD from the Windows 7 install as ext4 and to mount root there. Ubuntu installed just fine, grub2 comes up just fine, and Windows 7 boots with out a hitch, recognizing the mirrored partition as I indicated previously. When I tell grub to boot linux however, it pauses and I get the "no block devices found" message. It will then boot, but it does not recognize the raid array. After Ubuntu starts up I can run "dmraid -ay" and it recognizes the raid array, but shows the two component disks of the raid array as well. It will not allow the component disks to be mounted, but they show up which is annoying. (I can live with that if I have to)
I have fixed a similar problem before by setting up a dmraid script in /etc/initramfs-tools/scripts/local-top ... following the instructions found at the bottom of this blog:[URL].. To recap: My problem is that after grub2 fires up Ubuntu 10.04.1 LTS (Lucid Lynx), it pauses, and I get "no block devices found" It then boots but does not recognize the raid array untill I manually run "dmraid -ay". I've hunted around for what to do but I have not found anything. It may be some timing issue or something, but I am so tired of beating my head against this wall.
View 4 Replies
View Related
Jul 21, 2011
I am looking to convert a raid 1 server I have to raid 10. It is using software raid, currently I have 3 drives in raid 1. Is it possible to boot into centos rescue, stop the raid 1 array. Then create the raid 10 with 4 drives, 3 of which still has the raid 1 metadata, will mdadm be able to figure it out and resync properly keeping my data? or is there a better way to do it?
View 2 Replies
View Related
Mar 24, 2011
I have a box that doesn't have a Raid controller or a software raid running currently. I would like to make it a RAID 1. Since it seems there isn't any IDE RAID controllers hardly around, I have another HD that is the exact model as the drive currently in the box running CentOS. Can I some how add the second drive and get the box to mirror from here own out? The box gets really hot and I want to be ready for a HD failure.
View 3 Replies
View Related
Oct 16, 2009
I have a custom server built with Intel motherboard and RADI 10. The RAID controller is on the motherboard. I'm about to install fedora 11 x86 64 bit on it. Should I be experiencing any issues with anything that any of you have come across? I did a checksum check on the iso files and those were good. Also, someone sent me this link..
[URL]
However, I have a hardware RAID, not software RAID.
View 9 Replies
View Related
Nov 18, 2009
I just tried to install Fedora 12 x_64 on a machine that is currently running Fedora 11 x_64. It's a new machine for use as a server and is running a Phenom II 4 core on a gigabyte M/B - 4GB RAM, onboard ATI graphics, an Adaptec 5405Z RAID Controller that is in the 16 lane PCIe slot, and 3 SSD SATA dives in a RAID 0.I installed Fedora 11 x_64 on this machine just last week and it went perfectly smooth. The install recognized the video hardware, controller card and the RAID, installed correctly, boots fine, runs solid.When I attempt to install Fedora 12 x_64 on the same machine, it does NOT recognize the controller, nor the RAID and doesn't seem to like the video hardware. I stuck on a floppy drive and made a driver disk from the Adaptec provided Linux drivers, but the install fails to mount the floppy when I try to add the driver during boot from DVD - although it tries. (It's possible that my floppy drive and/or disks are too old to be useful. Seriously, loading drivers from a FLOPPY? Most computers don't even HAVE one any more.Sheesh...). The video also seems squirrelly and works better using the "simple" video drivers.
Anyone got any clues on this. It seems odd that the newer version works less well than the previous one.Maybe I'll try a different .iso - CDs or a live version or something just to check - and maybe try an install on a different machine. Yes, I put the install DVD through the self-test and it passed. I have tried 2 different copies and both fail.LATER - tried with live CD - boots OK, splash screen is OK, after bootup finishes it looks like maybe it's trying to start a different video driver - then the screen goes black and stays that way. Tomorrow I may stick in a discrete video card and see if that makes any difference.
Still Later: I have tried discrete video card, tried moving the RAID controller to the 4 lane slot, tried to install a driver from floppy (still no go) and have tried noprobe on boot command line. Although the "noprobe" got the video to keep going (albeit at a low resolution) it STILL refuses to see the RAID controller. The LED indicators on the RAID card SEEM to be indicating that the card locks up during Fedora 12 boot, but I haven't checked on that just yet. Fedora 11 continues to boot and run fine on the same machine - I'm running it right now. as I type this.Later yet: Ubuntu 9.10 86_64 that was released a couple weeks ago DOES, IN FACT see the controller and the RAID when I run the install process. Looks like Fedora 12 is badly broken after all. (Damn those even numbered releases anyway.....{;>D)=) Guess I'm going to be "stuck" with either Ubuntu or Fedora 11 unless a solution appears pretty soon. I have sent an inquiry to Adaptec, but I'm guessing they are going to say, "we don't support Fedora linux except Fedora 5 and Fedora 6" as those are the only drivers they seem to have available
Friday 11/20 - I've attached a SATA drive to the same computer. By using the "basic" video driver from the install DVD I am able to install F12 to the SATA drive without issue - it installs fine, boots fine, runs fine. However, it still will NOT see the RAID controller. I tried installing the driver .rpm from the disk that came from Adaptec, but the vanilla linux driver doesn't seem to be effective. So far, Fedora 12 continues to be a big FAIL! as far as this particular machine goes.
View 4 Replies
View Related
