Fedora Hardware :: HP G85 Not Printing In F13
Jun 2, 2010Acknowledges that it is there, and that it is the primary but wont print. SimpleScan works like a charm.
View 1 Replies
ADVERTISEMENT
Hardware :: Continuos Printing - Stop Ejecting The Paper After Printing Over?
Jul 28, 2010We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies View RelatedUbuntu :: Printing With Exact Size Photos And With Poor Auto Colour Printing But The Situation Remains Unchanged
May 31, 2010I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
Fedora Hardware :: Fedora 12 - Print From Windows Printing Server
Apr 29, 2010I have installed Fedora 12 with latest updates. My problem is printing from Winstar Networking USB 2.0 Server (WS-NSU62P). This device is attached with LAN cable to Windows XP machine. HP LaserJet 2200d is connected on WS-NSU62P with USB cable. This printer works fine with Windows clients (when you add printer with standard procudure for WinXP OS). Before adding the printer I have to install some drivers witch i found on install cd. I didn't found any drivers for Linux. Specification has info about supported protocol on WS-NSU62P (Network Protocol IPX, TCP/IP, NETBUEI, APPLETALK, LPR, smb (Over IP)
How to set my Printer configuration in Fedora 12 to enable printing from HP LaserJet 2200d connected on Winstar Networking USB 2.0 Server (WS-NSU62P)?
Fedora Networking :: Network Printing - 10 To XP
Mar 30, 2009I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
View 2 Replies View RelatedFedora :: Devices Recognized In F11 But Not Printing
Jun 12, 2009After the usual mild annoyances inseparable from a Fedora release (installation from the LiveCD worked OK, but generated a requirement for 162MB of day-one updates, followed by something like 150MB of downloads to install OpenOffice - which comes as standard with Ubuntu/Mint/Mandriva and, no doubt, many other distros) I have been able to get the system working reasonably well. If there are major performance gains from the use of ext4, I have been unable to detect them. However, the only really frustrating issue from my perspective has been the difficulty in getting my two printers (both of which worked straight out of the box in the other distros mentioned above) to actually print. The devices in question are a Brother 2140 laser printer and an HP 2280 multi-function inkjet.
Both of these devices were properly recognised by the system, but neither would actually print (there were some initial signs that action was imminent, but no result - the printing processes were finally shown as having been stopped). I removed both printers, and started from scratch. The laser printer could not be persuaded to work, either with the recommended 2170 driver or the old faithful 2060-gutenprint driver. However, when I tried to add the HP, the printer utility advised that I needed to install "hpijs" before proceeding. This I duly did, and the HP 2280 then worked fine. On the basis that my only aim was to get the printers working, I decided to ignore the recommended drivers for the Brother 2140, and select the "2060-hpijs" version. This worked fine, and others may like to try this workaround.
Fedora :: Not Printing - Samsung 1740
Nov 1, 2009On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies View RelatedFedora :: Printing Via SMB To Windows 7 Printer?
Dec 8, 2009I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
View 1 Replies View RelatedFedora :: 5 Second Delay Printing From Cups?
Aug 26, 2010Not sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
Fedora :: Borderless Printing With HPLIP?
Oct 31, 2010Anyone knows how to do borderless printing with HPLIP? I have an HP Photosmart C5550. On XP it is able to print borderless (without the white edges on 4 sides) on letter size (both plain and photo paper),but in F13 I always have a white border (~5mm or 0.2 inch) on the 4 sides of plain or photo paper.
Some old postings around 2008 said I should
- run hp-toolbox
- select "Print Settings" tab
- choose "fullbleed" (eg. 1200dpi fullbleed) in "print quality".
When I tried to follow this posting, I see no "fullbleed" selection in F13. Did I miss anything?
Fedora :: Printing From The Network Printers?
Sep 1, 2011I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies View RelatedFedora Networking :: Printing From A Windows Printer?
Oct 15, 2009I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
View 2 Replies View RelatedRed Hat / Fedora :: CUPS Printing In Landscape Mode?
Jan 21, 2010Trying to set up a printer for the 1st time using CUPS's GUI system-config-printer. Trying to set up a printer that will print in landscape mode, 132 characaters per line, and 66 lines per page.Got it to print in landscape mode but the line wraps at 108 characters.What settings do I need to get it not to wrap. Current settings are:
cpi: 15
landscape: true
lpi: 8
Hardware :: Epson Sx200 Fedora Printing?
Jun 14, 2010i have fedora 11 running, the printer as stated in the title an epson sx200, i can get the scanner to work with fedora, but when it comes to printing, it's no go, yet it sees the printer, i have installed cups to linux drivers for it from several sites, im totally baffled now what to else try.Has anyone got theirs to work in fedora or another distro, would be cool if someone has..
View 7 Replies View RelatedFedora Security :: SELinux - Update Stopped Printing
Mar 6, 2009I know very little about SE Linux and I've heard that in some situations it's better to disable it. For a home user, is it important? Does it improve your life ? or does it get in the way ?
Last week some update stopped my printing and I had to install the new hplip from HP because it wasn't in the Fedora repos to correct the problem. I don't know if SELinux had anything to do with it, but today when I disabled SELinux a few minutes later I get a star up on the toolbar and when I clicked on it it mentioned something about hplip. It wouldn't make any sense to me but maybe this has happened to others.
Fedora :: Cups 'Error Printing Too Many Failed Attempts'
Jun 25, 2009I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies View RelatedFedora Installation :: Noob. No Printing According To The Applet Says Its Stopped?
Sep 18, 2009I just installed Fedora 11 KDE. Everything went pretty good. But...my printer HP OfficeJet 5780 does not print. According to the applet says its stopped. After some tinkering it says something as: "Not having permission".
View 2 Replies View RelatedFedora :: HPLIP Install - Enabling Network Printing?
Nov 30, 2009In short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
View 12 Replies View RelatedFedora Hardware :: KDE 12 Printing Page Size Defaults To A4
Jan 27, 2010I have set everything in my printer settings to "US Letter" both via system-config-printer, and in the localization settings for KDE "System Settings". However everytime I attempt to print the printer will say that it's A4 and asks to load paper. I have searched everywhere for this default and I cannot find it in KDE. While in Gnome, all works as expected with printing (even when printing from KDE applications). Does anyone know how to change the default from A4 to US Letter?
View 14 Replies View RelatedFedora :: Printing With F12 - Printer Stops After Generic Error
Apr 28, 2010I've recently decided to migrate the infrastructure in my workplace from ubuntu to fedora, every thing except the printers went perfectly. When I try to print as an user It just throws an generic error and stops, as a root it doesn't even show the error.
This is the debug log:
Code:
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Active clients and dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdAuthorize: No authentication data provided.
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 1.1 Get-Jobs 1
D [28/Apr/2010:04:22:03 +0200] Get-Jobs ipp://localhost/printers/ .....
It worked fine in debian and ubuntu, so we can assume that the drivers are ok, any ideas?
Fedora :: Cups (F13): No Double Sided Printing On HP4650
Sep 2, 2010Freshly installed F13
Although I can use system-config-printer to set double-sided printing for a network attached HP4650, jobs are printed single-sided. Double-sided printing worked with fc7 with the same printer.
Fedora Hardware :: Printing Options Shrank In Cups?
Nov 29, 2010I managed to print from fedora without rebooting into windows.
--installed rpms provided by canon
--installed cups
--logged into cups
--selected my printer (ip2770)
--printed a page--and bang! too dark!
In cups, or on the computer, I only have one option, 600 dpi, which I'm assuming is why it is so dark, ugly, and nothing like it needs to look like This whole process (which is way over my head) put two printers in my printer set up, both called ip2700 series, and I'm not sure which should be the default. I am thrilled to be printing now from linux, but not happy with the quality.
Fedora Hardware :: Printing With Samsung Laser ML-1665
Dec 9, 2010Using Fedora 14. Printer usb connected and recognised with correct driver: Foomatic/PXL mono (Recomended). Will not print test page or anything else. Nothing seen in print queue.Iinitially choked by SElinux (since deleted). Still not working.
View 2 Replies View RelatedFedora Hardware :: Hp Laserjet P1007 Printer Not Printing?
May 29, 2011i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies View RelatedFedora :: Printing Large Image Over Multiple Pages In GIMP
Dec 8, 2009I have a large image that I want to print over 4 pages, each page showing 1/4 of the overall image, that I will past together. I'm doing this from GIMP on an up-to-date fc12 system. Searching around I find that there is a "scale" field in the print dialog and the lp command that cups supports and according to the documentation if I set scale to "200%" it should do what I want.However, when I set scale to 200% I get only one page with the upper left 1/4 of the page and then nothing. How do I get it to print the remaining 3 pages?
View 1 Replies View RelatedFedora :: Slow Printing Through Networked Printers Running FC11
Dec 23, 2009I have recently replaced an older server with a new Intel Xeon quad-core processor. The old machine was running FC6, the new machine is running FC11 64Bit. The problem that I am having is that printing to networked printers prints 2-3 pages, then waits 8-10 seconds and then prints 2-3 more pages. This repeats until the printout is completed. My first thought is that FC11 (or somewhere between FC6 and FC11) introduced some way to limit activity to devices? The confusing thing to me is that I went from a single CPU to a quad core machine, increased the memory from 1Gb to 3Gb, moved from a 32 bit machine to a 64 bit machine and I am running the same applications... they just run slower now...
View 10 Replies View RelatedFedora Hardware :: Wireless Printing - No Printer Found At That Address
Oct 1, 2010I have recently installed Fedora 13 dual booted with windows 7. Everything on both OS's works fine with the exception of Linux printing. I am using a Netgear WGPS606 print server. (it works fine on Windows 7). I have, from Linux pinged the server (192.168.1.200) and have gotten a response for each string sent but following the usual procedure [System-Administration-Printing then Add (a printer)- Expand Network Printer etc.] The response is that there is no printer found at that address. (the firewall was disabled).
View 4 Replies View RelatedFedora Hardware :: Brother MFC 240C Not Printing - No Pages Found
May 30, 2011This printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
Fedora Networking :: Network To Lan - For File Sharing - Printing And Internet Access
Dec 30, 2009I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies View RelatedFedora :: Printing From A Samba Printer Error Test Page Failed To Print
Jul 20, 2009I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies View Related