I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies View RelatedI run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies View RelatedAs we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).
Have downgraded to earlier version of Ghostscript but no joy.
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies View Relatedi dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies View RelatedI have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies View RelatedThe situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
[Code]...
I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]
All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies View RelatedI have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedDose Slackware 13.37 have printer support if so which desktop?
View 3 Replies View RelatedOn Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies View RelatedTried installing all the Samsung ML-**** from the list. PS Getting really tired of booting XP every time I want to print something.
View 3 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies View RelatedI have F15 fresh install on Samsung Q45. The brightness function key is recognized but doesn't really increase or decrease brightness. It is set to maximum.There was a workaround in F14 for same problem.
View 1 Replies View RelatedIt looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View RelatedI just installed it on my desktop. I love it so far, but I'm having trouble setting up a network in my apartment. I have the desktop directly plugged into my router and a mac laptop linked wirelessly to the router. I also have a printer and an external hard drive plugged into the desktop. The goal is to be able to access the external hard drive and use the printer from my mac laptop, as well as access the mac laptop from the desktop.
Right now, I can access the mac from the desktop with ubuntu on it. Under "Places" and then "Network," I can mount the folders I want and then access the contents.
I can also print and access my external hard drive from the ubuntu desktop.
However, on the mac laptop in the Finder under "Network" there is nothing. I can ping the desktop from the mac and get a response, but I can't for the life of me figure out how to get beyond this. In System Preferences I have "File Sharing" and "Printer Sharing" both checked.
Using Fedora 14. Printer usb connected and recognised with correct driver: Foomatic/PXL mono (Recomended). Will not print test page or anything else. Nothing seen in print queue.Iinitially choked by SElinux (since deleted). Still not working.
View 2 Replies View RelatedI have a MacBookPro5,1 laptop, and I have installed the 64-bit version of Fedora 12 on it, in addition to the Mac OS X operating system. When I'm running Mac OS X, I can connect my 720p Samsung television to the computer through its mini DVI port and the computer will go into a mode that will display on the television.
However, when I'm running Fedora and connect the television nothing happens. What can be done to allow the laptop to display on the television when it is using Fedora?
