Fedora :: Install Samsung ML-1710 Printer Driver?
Jan 19, 2010
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
View 3 Replies
ADVERTISEMENT
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
View Related
Nov 8, 2010
using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies
View Related
May 23, 2011
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies
View Related
Aug 31, 2010
i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies
View Related
Aug 16, 2011
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
View 9 Replies
View Related
Jun 29, 2011
I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
View 1 Replies
View Related
Dec 24, 2010
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
View 4 Replies
View Related
Jun 3, 2011
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
Jun 14, 2010
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Apr 20, 2011
I am currently using ubuntu 10.10 and trying to install the current driver for a lexmark x2600 printer. I retrieved the driver from the lexmark site, to be specific the debian version. Once I had the driver unzipped I was able to run the program to start installing it. However the problem is that it requires root privileges in order to install. So I input my admin password to allow the install. Apparently the password I use is not correct even though it is the admin/root password on my system.
View 4 Replies
View Related
Dec 8, 2010
Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).
Have downgraded to earlier version of Ghostscript but no joy.
View 6 Replies
View Related
Jul 27, 2011
I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
View 1 Replies
View Related
May 26, 2010
My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies
View Related
Feb 11, 2010
I installed printer drivers from a deb package and now I can't install/update anything!! I get this error:
jordan@jordan-desktop:~$ sudo apt-get install gtk-recordmydesktop
[sudo] password for jordan:
Sorry, try again.
[sudo] password for jordan:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
gtk-recordmydesktop: Depends: recordmydesktop (>= 0.3. but it is not going to be installed
pstocanonbj: Depends: libcupsys2 (>= 1.2.3)
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
Why is this 1 error tying up the entire install system?
View 4 Replies
View Related
Jun 19, 2010
I need driver for this printer and how to install.
View 3 Replies
View Related
Aug 4, 2010
The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
[Code]...
View 6 Replies
View Related
Feb 11, 2010
I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]
All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.
View 1 Replies
View Related
Feb 2, 2010
need a root password to install a printer driver. I have just upgraded to Ubuntu 9.10 have used the usual sudo command in the terminal window BUT when I try to type in a new root password the text entry is locked , so can't type anything.
View 7 Replies
View Related
Apr 9, 2011
I have a Synology DS110+ NAS which has print server feature. It is powered with a lightweight Linux version. I also have a Canon LBP2900 printer which is compatible with Linux, and I can use it with the proprietary driver if connected directly to my computer. As the NAS doesn't have this proprietary driver, it doesn't detect the printer as such when plugged in. How can I install this driver on the NAS?
View 8 Replies
View Related
Oct 4, 2009
I've just installed a network printer, Konica Minolta PagePro 1350W.I am required to install a printer driver, min12xxw%B.I could not find Linux drivers at the K-M website.
View 2 Replies
View Related
Jul 27, 2010
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
View 3 Replies
View Related
Jan 23, 2010
I need to install the driver and I downloaded the Canon install package. The instructions read:
# rpm -ivh [file name of common module for CUPS drivers]
This rpm package construct was used in the Fedora distro.
Does it also work in openSUSE?
The only other construct given was for a deb package.
I looked in YasT for the driver but it was not there.
View 9 Replies
View Related
Mar 21, 2010
I have a Samsung ML-1430 laser printer connected to my Fedora 12 box. I downloaded the appropriate Linux driver tar file from the Samsung website. After extracting the tar file into a directory called image, the following took place:
This generates a "Linux Printer Package Setup" pop-up screen.
The following error messages occur after I process the pop-up screen which specifies a default install path [/usr/local/linuxprinter] and asks me to check an "Install CUPS 1.1" box and a "Begin Install" box.
View 2 Replies
View Related
Jul 18, 2009
I have installed fedora7 with dell desktop pc. I conected (usb port)HP LaserJet1018 printer. but i didnt get the same hp Laserjet1018 driver.
View 2 Replies
View Related
May 16, 2010
After struggling with a bad LP cable I have finally proven that the cable, printer and port all work. I booted in to another OS and was able to finally print. Now, I'm trying to get server 10.4 to recognize the printer and then I want to configure CUPs so I can run this machine as a headless print server, among other things.
Apache is running as I managed to get nagios to run and I can pull it up from another PC via a browser.
sshd is running as I'm logged in from another PC via ssh.
Problem number 1 is how do I install a driver for an NEC Superscript 870 printer? As it is lpstat returnes with :
karl@zeus:/etc/cups$ lpstat -t
scheduler is not running
no system default destination
Once I am able to print then I need to print to the server from other hosts on the network.
View 9 Replies
View Related
Oct 20, 2010
I have found that there are certain things on the web that I need to print, that simply refuse to work under linux. I have a samba printer server on one of my Slackware boxes and an M$ XP vm under Vbox that can access the server and see the printer. The only problem that I have is that it expects to download a driver from the server which isn't available and the HP driver installer won't install if it doesn't detect the printer. Short of relocating the printer to install the driver, does anyone know how to get the driver installed on the XP host? This is so much easier with my Slack boxes and CUPS!
View 2 Replies
View Related
