Fedora :: Borderless Printing With HPLIP?
Oct 31, 2010
Anyone knows how to do borderless printing with HPLIP? I have an HP Photosmart C5550. On XP it is able to print borderless (without the white edges on 4 sides) on letter size (both plain and photo paper),but in F13 I always have a white border (~5mm or 0.2 inch) on the 4 sides of plain or photo paper.
Some old postings around 2008 said I should
- run hp-toolbox
- select "Print Settings" tab
- choose "fullbleed" (eg. 1200dpi fullbleed) in "print quality".
When I tried to follow this posting, I see no "fullbleed" selection in F13. Did I miss anything?
View 1 Replies
ADVERTISEMENT
Mar 12, 2010
Are there any programs that will do it?
-Epson Stylus Photo R380-
View 7 Replies
View Related
Nov 30, 2009
In short, attached a terminal screenshot of me trying to install hplip. Why hplip-3.9.10.run doesn't recognize the fact that gcc has already been installed? In detail: I have HP PSC 1210 connected to a Windoze XP machine. I want to enable network printing, but the only printer showing up standard in the F12 drivers is the HP PSC 1200. When I use that one, I reach the printer, and the Windoze printer queue, but no matter how long I wait, nothing ever comes out of the printer. It'll start moving like "I'm about to print!" but then does nothing. So through the hp-opensource website I determined which driver I want, and get a long way into installing the file. It hangs up on the attached screenshot.
View 12 Replies
View Related
Jan 4, 2011
I have following setup on my one of the customer where we had suplly thin client. Customer have their old system with SuSE Linux Enterprise Desktop 10.2 with HP LaserJet P1008. They had configure this printer thru foo2xqx & HPLIP 2.8.10. Our Thin Client which we had supplied with SuSE Linux Enterprise Desktop 11.1 & HPLIP 3.10.2.
I am able to install HP printer on my thinclient but thru IPP but, when we fire any print command I am getting "Stopped: /usr/lib/cups/filter/foomatic-rip-hplip failed" error. If I can connect printer on thinclient I am able to print. But, thru IPP share I am not able to print. Also, customer have their old thinclient also on which they share this printer so, I am not able to detach this printer from that system.
View 3 Replies
View Related
Feb 15, 2010
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
View 1 Replies
View Related
Oct 15, 2009
I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies
View Related
Apr 4, 2011
I have now two computers running Fedora 14 64 bit. The previous installation was a couple years ago and i have had no problem getting HPLIP installed - at least not a lot of trouble. This time, however, the install disk has installed the latest version but without a number of its dependencies. The .run shell only tells me that it can't install this or that dependency, in this case sane-backends-devel. When I use the command su -c "yum -d 10 -e 1 install sane-backends-devel" the dependencies are located and the debugger starts. The install proceeds until the more recent libtif 64 bit file is found already on my computer but the desired but older 32 bit version has been set up for install. This stops the business with an error. I have struggled with this until my backend is no longer sane.
I am not sure where to go from here. It looks to me as though the sane-backends-devel dependencies will always prevent an install. Is there a command I could insert to prevent this from happening - such as eliminating the d 10 switch or otherwise? Is there a way to skip one error and go on, for instance? I have not always used the shell to install, and there are several other methods out there, but without this dependency I will not be able to scan, which is what I have to do.
View 12 Replies
View Related
Jun 14, 2009
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
View 11 Replies
View Related
Jan 11, 2010
I'm getting ready to install Fedora 12 and I've been messing around with the live cd. I have a HP F4280 all in one printer. I currently am running Fedora 10 and it works fine. I remember I had to yum install the newest version of hplip and after that run the hpsetup command. My question is do I need to run the hpsetup command before using the gnome printer configuration tool or vice versa.
Also do I even need to run the gnome configuration tool at all?
View 3 Replies
View Related
Mar 24, 2009
How to install software file hplip.run ?
View 4 Replies
View Related
Feb 9, 2010
I had set up a newly purchased HP F4488 using HPLIP, I installed it on my Fedora 10 desktop and it worked fine for the past 2 days. Suddenly, it is failing to print. The scanner works and the photocopier works. When a print job is initialized there is an error and the printer gets disabled.
View 3 Replies
View Related
Aug 5, 2010
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
View 5 Replies
View Related
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Apr 29, 2010
I have installed Fedora 12 with latest updates. My problem is printing from Winstar Networking USB 2.0 Server (WS-NSU62P). This device is attached with LAN cable to Windows XP machine. HP LaserJet 2200d is connected on WS-NSU62P with USB cable. This printer works fine with Windows clients (when you add printer with standard procudure for WinXP OS). Before adding the printer I have to install some drivers witch i found on install cd. I didn't found any drivers for Linux. Specification has info about supported protocol on WS-NSU62P (Network Protocol IPX, TCP/IP, NETBUEI, APPLETALK, LPR, smb (Over IP)
How to set my Printer configuration in Fedora 12 to enable printing from HP LaserJet 2200d connected on Winstar Networking USB 2.0 Server (WS-NSU62P)?
View 11 Replies
View Related
Jun 2, 2010
Acknowledges that it is there, and that it is the primary but wont print. SimpleScan works like a charm.
View 1 Replies
View Related
Mar 30, 2009
I have been trying to set up printing on my Fedora 10 machine so I can print with a remote printer on my LAN that is attached to a Windows XP machine. I went through the whole configuration process, selected a samba printer, put in the correct UNC and driver- it is an HP psc series 1210, the printer was detected when I selected browse during the configuration process so I know I've entered the right UNC. When I try to print a test page or anything for that matter the printer starts as if it is going to start printing but nothing happens. When I go into printer properties it tells me that I have a Remote Downlevel Document and that it is printing but nothing is happening. I've tried restarting the print spool service but nothing works.
View 2 Replies
View Related
Jun 12, 2009
After the usual mild annoyances inseparable from a Fedora release (installation from the LiveCD worked OK, but generated a requirement for 162MB of day-one updates, followed by something like 150MB of downloads to install OpenOffice - which comes as standard with Ubuntu/Mint/Mandriva and, no doubt, many other distros) I have been able to get the system working reasonably well. If there are major performance gains from the use of ext4, I have been unable to detect them. However, the only really frustrating issue from my perspective has been the difficulty in getting my two printers (both of which worked straight out of the box in the other distros mentioned above) to actually print. The devices in question are a Brother 2140 laser printer and an HP 2280 multi-function inkjet.
Both of these devices were properly recognised by the system, but neither would actually print (there were some initial signs that action was imminent, but no result - the printing processes were finally shown as having been stopped). I removed both printers, and started from scratch. The laser printer could not be persuaded to work, either with the recommended 2170 driver or the old faithful 2060-gutenprint driver. However, when I tried to add the HP, the printer utility advised that I needed to install "hpijs" before proceeding. This I duly did, and the HP 2280 then worked fine. On the basis that my only aim was to get the printers working, I decided to ignore the recommended drivers for the Brother 2140, and select the "2060-hpijs" version. This worked fine, and others may like to try this workaround.
View 5 Replies
View Related
Nov 1, 2009
On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies
View Related
Dec 8, 2009
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
View 1 Replies
View Related
Aug 26, 2010
Not sure if this is hardware or software so I am raising the question here. I have an Ithaca 280 printer that worked great on fedora 8 with cups 1.3.3. When I upgraded my server and installed Fedora 12 with cups 1.4.2 i noticed a 5 second delay between sending a print job to the printer and it actually printing. This issue doesnt happen with laser printers, just the ithaca thermal printer. I have tested this with 10 other ithaca 280 printers and all of them have the same result. I am using a raw driver, and it is an IP based printer setup for Jetdirect in cups. The setup is identical on a Fedora 8 server as it is on this Fedora 12 server. I have even taken the steps to upgrade to cups 1.4.4 just to see if it was corrected in a newer version, but the issue is still there. I have a utility that writes the raw text directly to the printer which i used to test that it wasnt an issue with the printer or its internal print server. That utility allows the document to print immediately.
what is causing this delay and how to correct it? If not, does anyone know how to print directly to the printer using cups instead of letting it go to the queue first like cups normally does for print jobs?
View 2 Replies
View Related
Sep 1, 2011
I am using Fedora 12. I am connected by Wi-Fi to a large network with dozens of printers (the network is running CUPS). How can I set up my fedora box to "see" those printers so that "print..." file menu option works? Also, I know the address of the CUPS server; when I go to System->Administration->Printing and I go to Server->Connect I can connect successfully and I can see all the many printers on the network. But I haven't figured out how to print from my favourite programs yet.
View 1 Replies
View Related
Oct 15, 2009
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
View 2 Replies
View Related
Jan 21, 2010
Trying to set up a printer for the 1st time using CUPS's GUI system-config-printer. Trying to set up a printer that will print in landscape mode, 132 characaters per line, and 66 lines per page.Got it to print in landscape mode but the line wraps at 108 characters.What settings do I need to get it not to wrap. Current settings are:
cpi: 15
landscape: true
lpi: 8
View 5 Replies
View Related
Jun 14, 2010
i have fedora 11 running, the printer as stated in the title an epson sx200, i can get the scanner to work with fedora, but when it comes to printing, it's no go, yet it sees the printer, i have installed cups to linux drivers for it from several sites, im totally baffled now what to else try.Has anyone got theirs to work in fedora or another distro, would be cool if someone has..
View 7 Replies
View Related
Mar 6, 2009
I know very little about SE Linux and I've heard that in some situations it's better to disable it. For a home user, is it important? Does it improve your life ? or does it get in the way ?
Last week some update stopped my printing and I had to install the new hplip from HP because it wasn't in the Fedora repos to correct the problem. I don't know if SELinux had anything to do with it, but today when I disabled SELinux a few minutes later I get a star up on the toolbar and when I clicked on it it mentioned something about hplip. It wouldn't make any sense to me but maybe this has happened to others.
View 9 Replies
View Related
Jun 25, 2009
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies
View Related
Sep 18, 2009
I just installed Fedora 11 KDE. Everything went pretty good. But...my printer HP OfficeJet 5780 does not print. According to the applet says its stopped. After some tinkering it says something as: "Not having permission".
View 2 Replies
View Related
Jan 27, 2010
I have set everything in my printer settings to "US Letter" both via system-config-printer, and in the localization settings for KDE "System Settings". However everytime I attempt to print the printer will say that it's A4 and asks to load paper. I have searched everywhere for this default and I cannot find it in KDE. While in Gnome, all works as expected with printing (even when printing from KDE applications). Does anyone know how to change the default from A4 to US Letter?
View 14 Replies
View Related
