I'm trying to install using windows 7 on a 2010 macbook pro. Firstly the network configuration won't work and secondly the cd rom can't be detected. I've rewritten the usb drive several times with no joy.
View 3 RepliesI'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.
I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.
The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
I have got the following Problem: I installed the 64 bit lxde Debian version... I couldnt configure the network during the installation because I just have a dsl modem and not a router... so the configuration of the network failed.... after the installation I started debian... and was surprised about the lack of "basic system configuration"-software that had been installed... I couldnt find aptitude or whats the debian-Update-Programm called .... instead I found OpenOffice... HAE? then I tried to configure internet access..... so I started a terminal and tried to start pppoeconf... but the program wasnt found! ARRRGG! What am I doing wrong here.... Why are these system utilities like pppoeconf not always installed...
View 1 Replies View RelatedI'm new to Debian,I download a Squeeze amd64 installation CD and ready to install it.
My laptop is Compaq Presario CQ40-115AU,AMD 780G board with ATI Radeon HD3200 graphic card integrated,wifi chip is Broadcom 4312 14e4:4315. Now I don't have network connection in home,I have to install the Squeeze,and get my wifi work to do the further update at any cybercafe with wifi hotspot. I found this website,provide all the package,but I don't know which to download to get my wifi work.
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I've just installed OpenSuse 11.3 on my new laptop but I've skiped the network configuration during the installation of system, but after that when I use the command : dhclient eth0 I'll be connected without any problem except when I reboot the system, I should retype the command to connect
View 3 Replies View RelatedI have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.
View 1 Replies View RelatedI am running Debian Sid, KDE 4.3.4 with kernel 2.6.33 on a dual core 1.6 GHZ Toshiba Satellite A100-VA3, 2G ram. I have 4 multimedia keys beside my main keyboard that I used to configure successfully using the KeyTouch-Editor, and then loading it via KeyTouch. My problem is KeyTouch worked great with KDE 3.5.x but now it doesn't work with KDE 4.x.x. Has anyone managed to get KeyTouch to work with KDE 4.x.x? Is it broken or am I missing some kind of trick to get it to work?
View 3 Replies View RelatedMy touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
i have download debian 6.0.1 DVD, and installed corectly,i am using internet behind proxy, but i configure all the things thier and i still can ping to google from CLI bt i could nt update my system
View 2 Replies View Relatedi've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies View RelatedI just followed [URL] .... and [URL] .... because I need to connect to an iDRAC. I can't get I never see the Java Web Start Plugin as an option. If I do test my Java version, I only get the IceTea plugin.
View 2 Replies View RelatedI'm having trouble getting my wireless card (RNX-G300LX, from Rosewill) working with my Debian install. I had it working at one point in time, but (apparently) something has gone wrong, as it no longer connects. The network I'm trying to connect to uses WPA2. When I try to start up my wireless card as follows:
# ifup wlan0
I get the following response:
wmaster0: unknown hardware address type 801
wmaster0: unkown hardware address type 801
Listening on LPF/wlan0/00:1a:...
Sending on LPF/wlan0/00:1a:...
Sending on Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
I have set up /etc/network/interfaces as follows:
auto lo
iface lo inet loopback
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
auto wlan0
and /etc/wpa_supplicant.conf looks like this:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
fast_reauth=1
network={
ssid="apt_102"
scan_ssid=1
key_mgmt=WPA-PSK
psk="mypassword"
proto=WPA2 }
I should also note that running wpa_cli -i wlan0 tells me that it is "trying to associate" with my router, but authentication times out each time.
I cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
I've been having this problem for a long time now. It started suddenly and without apparent cause. 3D games won't work. At first I tried to play OpenArena, and it didn't work, the graphics went terribly slow and choppy, videos were not continious, but rather a succession of pictures of movement. I tried installing and re installing the game several times, but nothing... Now, I'm trying to run hedgewars (the re-make of worms) and it doesn't crash or anything, but the graphics are too slow and choppy again. This is the output from the terminal:
[Code]...
The 'there is no soundcard' message is scary... I have been having sound problems lately, where sounds just stops working in all applications, and only restarting the system will bring sound back. So as you can see my audio and video seem to be on the wrong track. But I don't know how to diagnose the disease... by the way. I installed hedgewars from squeeze though I have lenny. I added the squeeze line to sources.list.and then apt-get-ed it. Is that OK?
I have installed Firestarter, and set it up following some manual (just a simple, baseline setting, nothing fancy). However, after restart I got error message: Starting the Firestarter firewall... failed! and then, later: startpar: service(s) returned failure: firestarter ... failed! Why this happens?
View 4 Replies View RelatedI've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
I have an Atheros wireless USB dongle that will connect to my Wifi network just fine in Gnome but in KDE doesn't. I've read through the http://wiki.debian.org/WiFi/HowToUse and have installed all packages and tried all methods noted there but still can't get the wlan0 to work at all in KDE. Is wireless in KDE & Debian Squeeze useless?
View 3 Replies View RelatedSo, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
  Identifier "Intel Graphics"
  Driver   "intel"
  Option   "AccelMethod" "SNA"
  Option   "DRI"  "3"
  Option   "TearFree"  "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[Â Â 26.556] (II) Loading sub module "dri2"
[Â Â 26.556] (II) LoadModule: "dri2"
[Â Â 26.556] (II) Module "dri2" already built-in
[Â Â 26.556] (==) Depth 24 pixmap format is 32 bpp
[Â Â 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[Â Â 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
I can not to start dnscrypt-proxy-1.6 like server.
I use the man: [URL]
The man work for dnscrypt-proxy-1.2. It was work good. On latest version the man don't work.
I want that my DNS server is work well work.
uname -a
Code: Select allLinux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux
cat /etc/dnsmasq.conf
Code: Select alldns-forward-max=500
bogus-priv
resolv-file=/etc/resolv-dnsmasq.conf
no-resolv
listen-address=192.168.1.5
bind-interfaces
cache-size=600
[code]....
My system is Reaspbian (Like debian but for Raspberry pi 2).
I've been trying to get an ECDSA certificate to work for my postfix installation, however, it seems that when I try to use the aECDSA protocol with a client the server gives "no shared cipher" errors.
I had created the certificate like so:
Code: Select allopenssl ecparam -name secp521r1 -genkey -param_enc explicit -out private/ec-email-server.pem
openssl req -new -x509 -key private/ec-email-server.pem -out certs/ec-email-server.pem -days 365
So I've setup a test server, and connected to it with a test client like the following:
Code: Select allopenssl s_server -accept 123 -cert /etc/ssl/certs/ec-email-server.pem -key /etc/ssl/private/ec-email-server.pem
openssl s_client -connect localhost:123
However, once again, I get "no shared cipher" errors.
i have recompiled kernel on my netbook (lenovo s10-3t).suspend works correctly but then i cannot wake up. i think i just missed some kernel options.what options must be set for suspend/wake up?
View 7 Replies View RelatedI've been running my server for a few months now. I'm using the latest version of Lenny, regularly updated. The system is basic: it's a Celeron 1.2GHz-based machine with 512MB RAM. Since it runs SAMBA, I wanted it to run on Gigabit, so I bought a generic gigabit ethernet card with a Realtek RTL8169 chipset. For reference, the original ethernet adapter is an Intel 82801 (815 chipset) 10/100MBit. The card appeared in lspci when I first started up the system but eth1 wasn't up; I installed the Realtek drivers anyway (having installed all the kernel sources etc) and brought eth1 up. However, no matter what I do, it will NOT run at gigabit speeds!
It's plugged into a Belkin gigabit switch that I know will run at gigabit speeds; I've tried different ports and cables (including one that definitely allows gigabit) but nothing will allow the card to run at full speed. Eth0 is no longer set to automatic; only eth1 comes up on boot with a static IP.
[Code]...
I enabled java and flash in Iceweasel 3.5.16 via the related/required packages in the repository so flash-nonfree (or whatever it is) and the related java one. I didn't install either flash or java manually so no plugins that way. Flash and java works in Iceweasel. If I wanted to try Swiftfox, what do I do? I have it installed but both flash and java don't work.
I assume that one has to do the manual installs for both so go to both Flash and Java official sites and install the related Linux package. Will this conflict with my Iceweasel-based java/flash packages? Or do they go in separate directories and files? I don't want a conflict or interference and thus, don't want to break what's working.
I just bought for my T60 a pcmcia cardreader (16 in1) from HT-Link (HT-190). In Windows 7 no problem, but squeeze does not evenzethe card.It's not shown in lsusb or lspci.lspcmcia showsSocket 0 Bridge: [yenta_cardbus] (bus ID: 0000:15:00.0)
dmesg | grep pcmcia brings
[ 4.538206] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[code]...
My net-book is working properly with Debian squeeze 2-6-32-5-686, only the wlan does not work. After typing lsusb I have got the message: lsusb : Bus 002 Device 002 : ID 160a:3184 VIA Technologies, Inc. VIA VNT-6656 [WiFi 802.11b/g USB Dongle]
So I obtained the driver package : VT6656_Linux_src_v1.19_12_x86. I followed the instructions ( make install... ) - but the result is only a lot of error messages. Mayby I am using the wrong driver package for the squeeze kernel - I don't know.
I'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.
I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.
I've illustrated it on this picture, and hope to get the help i need to set it up... [URL]Thow it has to be furture secured, in that meaning it has to be abel to attach a eth2 on the main server, so i have 3 NIC's.Also, i want to have fully controll over ports, IP/MAC's and data overview (Such as a view of the files beeing downloadet/uploadet).
View 3 Replies View RelatedI installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies View Related