Debian Configuration :: Configure The Network During The Installation - Lxde AMD64 - Pppoeconf
Apr 8, 2011
I have got the following Problem: I installed the 64 bit lxde Debian version... I couldnt configure the network during the installation because I just have a dsl modem and not a router... so the configuration of the network failed.... after the installation I started debian... and was surprised about the lack of "basic system configuration"-software that had been installed... I couldnt find aptitude or whats the debian-Update-Programm called .... instead I found OpenOffice... HAE? then I tried to configure internet access..... so I started a terminal and tried to start pppoeconf... but the program wasnt found! ARRRGG! What am I doing wrong here.... Why are these system utilities like pppoeconf not always installed...
I just installed lxde on an ubuntu lucid box and after logging into it I found that the network manager applet doesnt start automatically and hence no internet connection. Though I could easily setup the net using ifconfig, I want to use network manager as this pc is used by my brother whos a beginner. In the terminal if I give "nm-applet &" the applet starts and the notification daemon states "connection established" but still internet is not available. So how can I configure the network manager in lxde?
I will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22 PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data. 64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1  Link encap:Ethernet HWaddr 00:25:22:1c:6e:05      inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0      UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0Â Â Â Link encap:UNSPECÂ HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00Â Â Â Â Â Â inet addr:10.42.0.1Â P-t-P:10.42.0.2Â Mask:255.255.255.255 Â Â Â Â Â UP POINTOPOINT RUNNING NOARP MULTICASTÂ MTU:1500Â Metric:1 Â Â Â Â Â RX packets:1775 errors:0 dropped:0 overruns:0 frame:0 Â Â Â Â Â [code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
What is the rigth way to intall n configure it with LXDE desktop? i has been search in this forum and it's pointing to GNOME..i also already google about this.. i see many tutorial about compiz with ubuntu gnome distro..i'm now using LXDE the vise-versa to the tutorial.
My new laptop works out of the box except for the video and the ethernet. For this, I have to use a later kernel than the Debian kernel (debian squeeze is currently 2.6.32). Upgrading to the new kernel (without moving to the testing dist itself) was pretty easy. I just installed linux-image-2.6.38-2-amd64 and linux-base from the testing distribution by manually downloading and using dpkg. After that, ethernet and video started working.
However, my virtualbox installation no longer works because the drivers do not match the kernel. I am used to this; whenever debian upgrades the kernel on me, I have to run "/etc/init.d/vboxdrv setup". This rebuilds the drivers. This failed for me, however, because it could not find the headers. So, I installed some more packages:
Go to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/" and delete the e1000e.ko-file
Then download [URL]
Take the newly downloaded e1000e.ko-file and move it to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/"
And finally load the module with either: "# modprobe e1000e" or "# insmod e1000e".
You should now have a working ethernet connection.
If connection is lost on system restart try rmmod e1000e; modprobe e1000e
I've for the first time installed linux (debian) to my computer. And I have a problem with ethernet that I can't solve.
I have a Asus Sabertooth P67 motherboard with built in ethernet card, I cant find any drivers for linux, I've tried google, Asus support page etc, but can't anything that says it will work with my computer, just a alot of windows drivers.
where I can find the drivers? Or if there's another way to solve the problem. When installing Debian i could choose between different drivers but no one worked, I've also tried with my motherboard CD but there was just windows drivers...
I do recall being able to at least figure out Debian enough that I got my wireless working (a few years back). Today I popped in a fresh Live LXDE DVD. I can't find that my wireless is recognized, nor can I find any graphical network management utilities. Nothing network related. Perhaps its all in the command line, but I'm not too familiar with it (though I'm not averse to following instructions if I can use that to simply fix this issue).
I did look at documentation first. To the best of my ability anyway. I could not use it to help myself. Once I get internet working, at least I can trouble shoot on the Debian installation itself, which makes the process much easier. Having to switch out to a Windows installation is a pain.
I was using Synaptic to remove unwanted sound & audio programs...it seemed to take out other files that were non-related ?
(1) Now apt-get complains about a "Held Package" and doesn't tell me the pkg name.
(2) Synaptic is broken...error..E: The value 'stable-updates' is invalid for APT::Default-Release as such a release is not available in the sources
E: _cache->open() failed, please report.
stable-updates isn't even in my sources list. I've purged synaptic, and re-installed but remains broken. When you close error msg synaptic disappears ? Therefore can't use synaptic at all.
(3) apt-get says many packages that were available are no longer available...like one of the main repos has disappeared ?
(4) I put the same repos that are working for my brother who is running Debian Jessie also, but didn't improve the number of missing available packages.
deb [URL] ....
deb [URL] ....
How or why things have gone so wrong from just removing unwanted sound pkgs.
To recap problems...apt-get held pkg....broken synaptic....unavailable pkgs.
I'm always getting a blank console screen after booting a 2.6.32-trunk-amd64 kernel in squeeze. I still can read the line "Loading, please wait ..." in the display for a second - then it's completely black until X windows is starting. When I try switching from the X console to another virtual console (by pressing Ctrl-Alt-F1 e. g.), the complete system freezes. I have to hard reboot then.When I boot the previous 2.6.32-3-amd64 kernel instead, everything is fine as expected, though.There's a line "GRUB_GFXMODE=1024x768x16@60" in /etc/default/grub as well as a line "set gfxpayload=keep" in /etc/grub.d/00_header. So the problem might be framebuffer related in any way. Any ideas what could be tried?The system is a Latitude E6500 with a Mobile 4 Series Chipset Integrated Graphics Controller
I ran across something while installing amd64-kernel.I did so cause i wanted to test hadrets xfce-4.8 repo.viewtopic.php?f=16&t=58733#p341988It boots very fast.I usually don't care about such things, cause i am very happy how it is, but i wanted to check if it is a feeling, or for real.I followed gnududes how-to use bootchart:viewtopic.php?f=16&t=38869So, that was the long story, here comes the short version:On i368, but a full installation with all kind of stuff, it takes 20 seconds to boot.On amd64, with only a few basic packages, it takes 8 seconds.Is the fast boot time due to 64, or is it due to the little amount of apps?(that was my question for this thread, in case no one realized).
I wanted to know which is the best firewall application for my debian squeeze amd64 home desktop. I prefer a simple interface yet powerful enough. After googling I found two options - gufw & firestarter. I am not sure which one to choose between these two.
Installed 6.01a from DVD 1 on a system with 4GB ram. Installer installed amd64 version by default. When I try to install amd64.deb files I get "wrong architecture" error messages from the package manager. root@Laptop-RalphDeb:/home/ralphq# uname -r 2.6.32-5-amd64 root@Laptop-RalphDeb:/home/ralphq# uname -p unknown Why I can install amd64 programs and why I get unknown for the uname -p command?
I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.
My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg
Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!
The first issue is adding launch icons to the task bar. I can add launchers, but cannot figure out how to link them to applications. It is only half a problem, because putting links on the desktop is easy, but I prefer having launchers on the task bar so the desktop is not cluttered.The big problem is placement of desktop icons. I like to put icons on the right side of the screen, and more importantly, I like to group related icons. For example, if I had a folder or document for Linux and another for Debian, I want them grouped together. I also like arranging by category: folders in one column, documents and images in another and launchers (if any) in a third. However, if there is way to enable desktop icons to be moved, I cannot figure it out. Icons are fixed on the left side of the screen with folders first in alphabetical order, then documents/images in alphabetical or numerical order, and launch icons last.My guess is icons can be moved, but I am not computer literate enough to figure it out. It does not make sense that the task bar can be placed on the top, bottom, left or right, but desktop icons cannot be moved. I have tried every preference setting, but there are no relevant options.Am I over-looking something that is not obvious or is it a strange deficiency with LXDE?
I have a computer with internet access with amd64 architecture running Debian stable (Lenny). I have another computer with NO internet access with i386 architecture running Debian stable (Lenny).I want to download some packages for the i386 computer using the amd64 computer. So far, the only way I can see to do this is to use dpkg-architecture to temporarily change to i386 on the internet computer, run aptitude with the download-only option to retrieve the packages I need with all suitable dependencies, then switch the internet computer back over to amd64.
I can't imagine I'm the only person who ever needed to do this, and yet I've had no luck finding any advice. The method I described seems rather awkward - is there a more elegant solution?
I apologize to the membership, I realize now the absurdity of this subject. Having now studied the online repository search functions closer, I see it appears packages are automatically retrieved with all necessary dependencies. As such, it is not necessary to use apt and its various functions to do the job.
I have a strange problem in my new debian 8.3 LXDE install. Every time I boot my laptop it goes in to sleep mode automatically after a min. It is a default install and I have not configured any power management options. How do I find out the reason for the automatic sleep and how can I rectify it?
After the use of pppoeconf, the network manager does not recognise neither the wired nor the wireless connection anymore. (It nicely did it before that) I tried to replace the etc/network manager folder with that of a different machine. Still the same. What else can I do to reset Network Manager ?
I have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** ************************************************** sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb [sudo] password for aUser: dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
I'm trying to install using windows 7 on a 2010 macbook pro. Firstly the network configuration won't work and secondly the cd rom can't be detected. I've rewritten the usb drive several times with no joy.
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
I wonder what is your opinion about the best method for using an ADSL modem. Router or bridge? I did read some articles that say "that the bridge mode gives you more stability and has higher speed". Is that true?
Furthermore, you suggest any alternative to "pppoeconf"? I've been getting this errors ( in the plog), related to "PAD packet loss" and also errors in "PPPOE Discovery", even when I am connected. When this things starts to show up on the log, my connection "pauses" for some seconds. I do not feel very safe with this program.
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15 code....
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
I've just installed Debian AMD64 on my main box (Intel Q6600, Ati HD4770, Asus P5K) using the DVD install. It boots, but hangs when it tries starting the graphical interface. No reports, no commandline, nothing at all - a nice black screen and completely unresponsive system.
i am using debian lenny stable and gnome desktop environment and having an i386 architecture.I configured to connect to the broadband connection using pppoeconf with the default options and the setup went smooth.when i connect to the internet using the command
and when i check that if i am really connected to the internet i used the following commandjj@debian#ifconig
it showed my ip address dns,etc in the ppp0 coloumn .But when i open up my iceweasel browser and also the epiphany browser and when i try to load a web page it states that it couldn't find the server.so guys please tell me how to configure it correctly and please tell me what i did wrong. p.s when i tried to configure the adsl connection by the alternative using the command pppoe-setup it states that It couldn't find the /etc/ppp/pppoe.conf file so do i have to create it on my own?
I use openSUSE 11.1 and my YAST can't connect Internet: How to configure my YAST Internet configuration through proxy server in order to download and install the programs (for example dwnld and install WML from [URL])
Using VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.
The way I usually boot Linux distros, and this has worked for every distro I have tried up to Kubuntu 10.10, was to install Grub2 on an extended partition, run "dd if=/dev/sda5 of=linux.bin bs=512 count=1", and then adding that bin file to my Windows boot.ini. What usually happens after is that I get the Grub2 menu after selecting it from the Windows Bootloader.
The problem is, with the latest Squeeze AMD64, all I get when I do this is a static cursor and the computer is frozen and I have to hit the reset button.I mounted the Linux partition with Ext2IFS (mkfs.ext3 -I128 /dev/sda5 to get 128KB inodes), and I can see that the Squeeze installer did indeed install Grub2, because I can see the files in their respective directories.
