Debian Configuration :: Getting Network Error - Every Time Rebooting My Server Lost My Network Config
Mar 3, 2011
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
View 1 Replies
ADVERTISEMENT
Jan 26, 2010
I have a Fedora 11 into a virtual environment (ESX) I remove all interfaces but with the command system-config-network I see my previous configuration How can I remove/clear all my network configuration to start another time to config?
View 9 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
Jun 30, 2015
I have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies
View Related
Aug 11, 2011
Some problems keep bothering me and dont let me use my debian sqeeze with joy.Im in network with no DHCP on. When installing i didnt configure my eth network card.After each restart i need to configure manually my eth because it loses it.
View 7 Replies
View Related
Oct 3, 2015
Debian Testing, updated daily, running Gnome.
A week ago, a new router was installed at the office and now my system "loses" the networks printers and forces me to manually select them within Cups various times a day to be able to print. The issue was not present when the old router was in place, and all my colleagues can print without problems using their Windows machines.
This only affects printing, for Simple Scan can always communicate with the printers without problems.
The printers are two basic Epson L355 (those with ink tanks) and the "official" driver (from Open Printing) has been working perfectly since I installed Debian. The whole Cups and Avahi stack is installed, and I even added system-config-printer this week to make sure that I was not missing a package.
Because the only variable that changed is the router, there has to be something there messing with my Cups or Avahi configuration.
Note that the new router had a "vanilla" installation, where no advanced settings were touched. All connected devices (computers, mobile phones, printers, etc.) are given new IP address through DHCP every day.
Where should I start? I have already deleted and added the printers within Cups several times during the week, and the problem persists. Is the router renewing the address more often than the old one did? Can this "refresh" be delayed? Should Avahi monitor devices more often?
I guess that I could configure the router and give static IP addresses to the printers, but such a setting was not present in the old router and my computer could locate the printers without problems.
View 3 Replies
View Related
Feb 5, 2016
Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
View 2 Replies
View Related
Jul 6, 2015
I have a rented vserver running at Strato [URL]. It came preinstalled with Debian 7. I upgraded it to Debian 8, what seemed to run fine, all services running. The problems came up when I tried to reboot the server to test the init system. It just does not come up, I cannot ping it, nothing. I can boot into the rescue system, mount the system partitions and chroot in to the filesystem. In this state I also can run my services, including apache2 and mysql. In the syslog I find nothing about the reboot. Now I need to reboot ino the normal system. I already tried to resume to sysvinit without success.
View 7 Replies
View Related
Apr 20, 2010
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies
View Related
Sep 29, 2010
I need to set up a Debian server in a windows network so that users can securely ftp docs to the Debian server and then pull docs from the server when needed - using a secure ftp session. I have the Debian Server built and IP'd. Do I just need to set up the vsftpd.conf and thats it? Right now I am just concerned with getting ftp working.
View 7 Replies
View Related
Nov 26, 2010
I am putting together a server and computer lab at my school for Standardized testing, and am planning on using debian for it. But first, i must prove to the school board that this is a possible and viable option, so right now it is one pc with 1 gig ram (Going to be the server for this experiment), and two others with around 512 mb ram.the problem with all this is, the computers in the lab cannot have hard drives, as there is some sort of licencing issue. So I need to be able to have these two testing computers boot from the server's hard drive.
View 14 Replies
View Related
Oct 24, 2010
I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.
I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.
The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.
View 5 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Oct 16, 2015
We are having an issue where our network connection is dropping on our server. Everything was working for about a month without issues then suddenly we experienced a network outage. Here is what I found in our logs. Rebooting the machine was the only way to have everything come up.
Oct 16 09:20:59 server2 kernel: [2612816.936085] ------------[ cut here ]------------
Oct 16 09:20:59 server2 kernel: [2612816.936101] WARNING: at /build/linux-FpPMO6/linux-3.2.54/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
Oct 16 09:20:59 server2 kernel: [2612816.936106] Hardware name: ProLiant DL380p Gen8
Oct 16 09:20:59 server2 kernel: [2612816.936110] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out
[Code] ....
We have the same exact server, running the same exact debian version for over a year with no issues.
View 0 Replies
View Related
Mar 4, 2011
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
View 1 Replies
View Related
May 30, 2010
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
View 3 Replies
View Related
Mar 16, 2010
I am running a NFS share on a Debian Lenny server with to network interface.
Sometimes when booting the server the following messages i shown in syslog:
Code:
If the system is rebooted then NFS is functional again. I would like to know way this happens somtimes so i can repair it, anyone with an idea? Another thing is that i would like to bind the NFS service to a specific interface e.g eth1 is this possible?
View 2 Replies
View Related
Mar 27, 2011
I installed debian 6 (stable) on laptop with dual boot Windows 7 and Debian. when i was installing debian ,every things were ok and installed correctly (such as DHCP configuration) before installing APT package configuration part. error is about mirror zone! i checked it and tested with all mirorrs in list but i couldnt config APT yet.i did installation without APT.after booting debian i have apt-get and aptitude commands but didnt work commands like apt-get update or aptitude install ... or aptitude update .... when i ping an ip , it dosent answer cause of errors .(but i have network connection on windows7 correctly. im using connection wired.
View 1 Replies
View Related
Feb 16, 2010
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
View 1 Replies
View Related
Mar 25, 2010
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies
View Related
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Feb 14, 2010
Last night while setting up wired & wireless connection in openSuse 11.2 Gnome version via YAST's ifup, I got wireless but lost wired connection (interface eth0). Dmesg shows that eth0 became eth1. I cannot get eth0 back. Is there any way to remedy this situation, eg. get info from the Ubuntu partition in my triple-boot laptop, without having to re-install openSUSE?
View 3 Replies
View Related
Nov 9, 2010
After an automatic update from Debian I get the following error while starting a root terminal:
An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly.
Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
View 6 Replies
View Related
Sep 2, 2010
I installed CentOS 5.5 on my Compaq desktop PC connected to a LAN/Router, at the installation somehow the LAN connection was automatically determined and I was able to use the browser without doing anything.However when I added a print server to the LAN/Router I lost network connection from my Compaq PC running CentOS 5.5. Is there a way to rerun network manager installation to determine the new LAN settings (with a print server attached)
View 7 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Jul 29, 2010
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
View 1 Replies
View Related
Mar 5, 2011
I am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies
View Related
May 20, 2011
I'm using Opensuse 11.4 updated from 11.3, update from 11.2 updated from. I'm mounting at boot time (in fstab) some shares from an opensuse 11.2 server. Mounting worked fine in 11.2, 11.3 and also in 11.4 but suddenly (maybe an automatic update?) It stopped working.... sometimes.
Sometimes they are mounted properly but sometimes they aren't. When mount fails I get a log error: "rpc.statd is not runninf but is required for remote locking. Either use '-o nolock' to keep locks local or start statd"
If I run manually (as root) mount -a the shares mount properly always, so I thought it was a problem of timing (the service starting late) so I tried to get a script to run after the network initialitation, the script does: "mount -a". But it doesn't work either.
View 3 Replies
View Related
Aug 4, 2015
I just bought an lenovo thinkpad 440 few days ago. I did all that was shared at [URL] ....
I get the following on the CLI :-
Code: Select all[ 1527.961367] [drm:intel_set_fpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[ 1527.963448] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
View 2 Replies
View Related
May 27, 2010
I left the Ubuntu 10.04 Lucid installation cd I burned in the drive and rebooted the remote machine. Now I cant get it on VNC or ping it by name. But the IP it had before still replies to pings. When I check the DHCP database in Windows Server 2003, that IP's machine name is now "ubuntu", not the same as before. Does this sound like what a machine would do when that cd is left in the drive on a reboot?
View 4 Replies
View Related
