I've illustrated it on this picture, and hope to get the help i need to set it up... [URL]Thow it has to be furture secured, in that meaning it has to be abel to attach a eth2 on the main server, so i have 3 NIC's.Also, i want to have fully controll over ports, IP/MAC's and data overview (Such as a view of the files beeing downloadet/uploadet).
View 3 RepliesI'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
I would like to update my network setup.
Today, I have an ADSL box which is my gateway to internet (192.168.0.1).
I have a Raspberry pi (RPI) which I use as a dhcp & dns server (192.168.0.2).
Recently my mobile phone operator installed a 4G antenna beside my home, and the bandwidth and latency are much better with my mobile phone than with my internet provider (ADSL).
I would like to install a wifi dongle on my RPI (I would get wlan0 & eth0 interfaces)
When RPI detect my shared phone connection (tethering) I would like RPI to automatically route internet:
- from authorized devices on my network to my mobile connexion (wlan0 -> mobile phone).
- from other devices to the standard ADSL internet (eth0 -> ADSL box).
I don't want any device to use the shared 4G connexion, best would be authorized devices to be selected by MAC address. How I should properly setup such a network ?
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
I do not care to have the DNS server public but more for internal networking at the moment. I have comcast and the server is directly to the modem (10.0.0.1) with a static IP which is 10.0.0.6
I created a zone, local and reverse inside /etc/bind
When I try to execute:
Code: Select all#/etc/init.d/bind9 start
I get a failure.
When I check syslog I get:
Code: Select all#/var/log/syslog -
somwhere in the log it would say.
Opening /[my sudo username]
Failed /[my sudo username] no such file or directory
my resolv.conf in the etc folder keeps reconfiguring itself everytime I restart networking
Using PKI infrastructure in the environment, preferably a two tier hierarchy? I would like to setup one the way I setup in Windows Server, so was thinking to set one on Linux.
View 2 Replies View Relatedi am trying to get a pxe server working on a debian so other clients can boot off it. the problem has two parts.
1. getting the pxe working. so far the tftp part doesnt work. the client says tftp error. so i guess the dhcp portion is working, but theres something wrong with the /var/lib/tftpboot or the deamon config itself.
2. the other issue is that in the shop many system's have non-working disk drives. also many of them do not have a usb boot option in the bios. all i need to do is get the "bare" kernel file or grub(?) to boot over pxe and give me the ability to boot from a usb flash drive and load the rest of the linux files from there. my primary intention is NOT netinstall. although it wouldnt hurt. my intention is running a linux live usb on systems without bios usb boot support. ive read somewhere that a full pxe live boot requires nfs setup. i am asking for that, just so i can boot from a flash drive.
I posted a previous topic on bridging, and that didn't seem to work, so I went with Shorewall and I'm trying to setup NAT, but I'm struggling very badly. I have the interfaces configured where eth1 is my Local LAN (loc) network, and eth0 connects to my ISP (net). But my problem is that I have no clue how to forward traffic from eth1 to eth0, without using ProxyARP, which routes all traffic to eth1, and doesn't allow traffic out on itself. I've looked at the NAT tutorials, and they don't make sense to me, because I have two interfaces that I want to be able to talk to each other and the internet at the same time. Is there anyone who's good with Shorewall?
View 3 Replies View Relatedusing Debian 5.0, GNOME desktop.my DSL service was to be connected today.the problem is my DSL light keeps blinking.ethernet light is solid.how do i setup my DHCP on my computer
View 12 Replies View RelatedI follow the tutorial at [URL] to setup git over http, and create ssl self-signed cert through [URL]. (The command executed above is exactly the same as described in url, with only change to the name required.) However, while executing `git push upload master', command line prompt throws:
error: Config with no key for remote upload-url
fatal: bad config file line 9 in config
What might be the root cause?
how can i setup ddclient at startup i already configured the client all i need is to let it start on bootup
View 3 Replies View RelatedWhen I click on Network Manager client in the Gnome Panel -> vpn connections -> configure vpn, the add button is not enabled.
View 5 Replies View RelatedI'm new here, I hope someone can help me get wireless working on my laptop. This is a Toshiba Satellite Pro C650-EZ1533 (Intel Core i3). The Toshiba site says it has "Atheros Wireless networking (802.11b/g/n)", but does not identify the hardware more specifically.
I installed Debian 6.0 from a netinstall disc, the version including nonfree hardware drivers. In the software selection I went with the defaults: only "Desktop environment", "Laptop" and "Basic system".
Now the GUI looks nice and behaves OK, and the audio, video, ethernet, and optical drive are working. However, I don't know how to configure wireless. It's probably my fault. I was installing and uninstalling file managers, trying to find one I would like better than Nautilus. When I went to uninstall one of them, a message in the package manager recommended using a command like "auto remove" or similar (I did not record it exactly). My understanding at the time was that this would only remove things that were installed because of dependencies but were no longer needed. However, *a lot* of things disappeard from the menus.
Now the only thing about networking in the menus is something about setting up a proxy. There should be some sort of network manager, right? Or an icon on the taskbar, maybe? But I don't know what package to install.
I installed Debian GNU/Linux and Debian GNU/kFreeBSD on the same system. I didn't reinstall grub with kfreebsd, because I figured running grub-mkconfig would modify grub.cfg. But it didn't.It recognized the Debian GNU/kFreeBSD as GNU/Linux (6.0.1):
### BEGIN /etc/grub.d/30_os-prober ###
Found Debian GNU/Linux (6.0.1) on /dev/sda3
### END /etc/grub.d/30_os-prober ###
I'm trying to find good instructions to help me set up a print server with a usb printer on a Lenny box with no GUI. The printer is a Brother HL-2170W. Can anyone point me in the right direction?
View 2 Replies View RelatedI would like to discuss setting up a mail server and its implications and alternatives. First, let us see if I have understood this correctly: A mail server consists of many different components. First, a server to listen to any mail inbound for a specific domain (say postfix), and then a POP3/IMAP server (say dovecot). Then, I should somehow configure the rules by which all mail is forwarded to their respective owners. This should be fairly simple by using debians package managers and dselect or whatever program it is that sets up right packages by use cases at the install.
But now lets assume a more complicated environment, where there are multiple users with different domains and needs. First, we need to send mail to ourselves from webapps for instance for backup purposes. So let's say we have a domain called domain.com setup, and we want to send mail to backup@domain.com. Unfortunately, some configuration issue makes the application get confused, because it is trying to send mail to itself, but doesn't quite understand what it should do. How can this problem can be solved?
Second, how could I configure different domains with different rules. For instance, if I want one domain to have a catch-all account, where random email sent to erroneous accounts is captured? Or if I want to create accounts which are not based on actual Debian accounts, but instead just random usernames (say, danny@domain.com, mike@domain.com, support@domain.com etc.)?
Finally, which are the best web-guis for doing such configuration? What if the customer wants to himself add accounts? I cannot require him to edit text files - especially if he can thus break the whole configuration for other customers as well.. postfix-admin is one, but it is quite crude-looking. Is there something which integrates both postfix, apache and dovecot configuration? How about Webmin?
I'm trying to setup roaming profiles on our Samba PDC. I've been at it all day, running into a lot of issues with access denied, and going around changing permissions hoping to fix it
The problem seems to have evolved over the day, getting worse. Right now it's an error message on logging in: Windows cannot locate the server copy of your roaming profile.....
DETAIL- The network name cannot be found. In addition, the user does not have access to any shares by default.
The server can be accessed manually and the user can connect to shares. The server can be pinged by the client. The client's user profiles do not get stored or retrieved on logout/in
current smb.conf
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/22 16:34:42
[global]
workgroup = ROSHNI.LOCAL
[Code].....
my proftpd setup will not do passive ports, reading the how-to on this page [URL] It gives the instructions on how to set up passive ports and masqurade but the example is using ipchains so before I start typing these commands in I would like to know if I need to change anything in the commands other then the ipchains command.
[Code].....
will this work on debian 5.05 also how do I find out if I use ip filters.
I edited /etc/profile to look like:
# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
if [ "`id -u`" -eq 0 ]; then
[code]....
When i type env, it just shows: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin It also shows JAVA_HOME, CLASSPATH and others were set up. Trying to get updatetool in glassfish usable for any user and during any session. I did the export command in a shell, and it worked, but not after closing the session. how to do environment variables.
I installed the base of Debian (only CD 1) without the desktop environment, so it is console only; also I am dual booting with Windows 7 x64 on this Dell Inspiron 1545 laptop... I have also successfully mounted my usb flash drive and CD drive; the one thing I am finding rather hectic is finding a way to connect to my wireless network with a "WPA2 Personal" Security and "TKIP/AES" Encryption with a Dell Wireless 1397 WLAN Mini-Card... I doubt that the drivers are actually installed, and Idk how to install them.Google searches on this yield confusing results, so I need help. So far, the most useful help I have found is the link posted here: http://en.community.dell.com/support-fo ... 29916.aspx but I have no idea on how to install that, if it is even what I need.
View 5 Replies View RelatedAlsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?
View 8 Replies View RelatedI want to setup some virtual machines that will use the same architecture and debian-version as my host-machine. I have started to setup VMs with a netinstall-image and now want to add more software using apt-get. As most of the software I will use is already installed on my host-machine I wonder if there is any way to configure apt in such a way that it will not download packages from the internet, but will use the packages from my host-machine to save network-traffic. Is there a good may to populate VMs using the debs from the host-machine.
View 1 Replies View RelatedI need to set up quotas so each user has a limit of 20GB (soft could be 15GB) on their homes.Is there a way to set up a default quota for all the users, or do i have to do this for the 345982374058 users in my system manually?would group quotas help? (i dont understand much of these type of quota)
View 2 Replies View RelatedI was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
Could anyone point me to some simple articles that explain what email encryption is and how to set up a mail server (e.g. Exim) that can send secure emails? I know nothing about networks, mail servers, encryption, etc., but I have to be an expert on it before I walk into work tomorrow morning.
View 14 Replies View RelatedI am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
View 5 Replies View RelatedIs it possible to setup tapping so that a fast tap with two fingers behaves like the right click button.
View 12 Replies View RelatedI now have 2 desktops running debian. I have virtual servers running in desktop 1, and I am hosting my photos using Gallery2. I have copied Gallery2 and the mysql over to desktop 2. I have entered port forward to desktop 1 using port 80 (using my router), and desktop 2 using port 1000. I can only access Gallery2 in desktop1. If I tried to access Gallery2 in desktop 2, I got re-directed to desktop1.
Questions:
1. Are home routers capable of port forward to more than one computers in a home network behind the firewall of the router? It is Belkin N+ router.
2. Can multiple virtual servers be setup in 2 desktops?